Tender For Restoration Of Damaged Electrical Furnace No. 2 Along With Furnace Gate Lifting Arrangement And Other Works At Dhapa Human Crematorium.
Tender Value
3.48 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
1 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Damaged Electrical Furnace No. 2 Along With Furnace Gate Lifting Arrangement And Other Works At Dhapa Human Crematorium.
BOQ
| Sl. No. | Item Description |
| 1 | PATCH WORK WITH BRICKS: Good quality fire clay mortar Washing of the entire chamber with Sodium Siliminate clay should be necessary. |
| 2 | ALTER (WITH BRICKS M.K.92): Construction of Alter in front of furnace chamber flash to furnace door inside with M.K ...92 fire bricks with good quality fire clay mortar |
| 3 | BLANKET FOR FURNACE DOOR : Construction of door blanket with 2 layers of ceramic blanket of density 96kg/cm... with 2 layers of ceramic blaket of density 128 kg/cm... and to be fitted in the spikes with S.S.pin so as the blanket does not came out. |
| 4 | CONSTRUCTION OF DOOR BLANKET: a) Supply, Fixing the S.S304 spike from inside the furnace door each of 280mm dia for holding the ceramic blanket |
| 5 | FRONT COVER OF FURNACE DOOR: Supplying and fixing the new cover made of from 3.15 mm (10 SWG) CRCA sheet over all dimension 2400 mm X 1200mm with top arched shape as per existing drill holes for fixing over the furnace door in two halves. L.H Side |
| 6 | FRONT COVER OF FURNACE DOOR: Supplying and fixing the new cover made of from 3.15 mm (10 SWG) CRCA sheet over all dimension 2400 mm X 1200mm with top arched shape as per existing drill holes for fixing over the furnace door in two halves. R.H Side |
| 7 | BALL BEARING:a) Supply and fixing the ball bearing (SKF make) of furnace door by opening Palmer Block including wearing tapered sleeve as existing size with locking nut. SKF make 1213EKTN9 |
| 8 | BALL BEARING:a) Supply and fixing the ball bearing (SKF make) of furnace door by opening Palmer Block including wearing tapered sleeve as existing size with locking nut. SKF make 1211EKTN9 |
| 9 | BALL BEARING:a) Supply and fixing the ball bearing (SKF make) of furnace door by opening Palmer Block including wearing tapered sleeve as existing size with locking nut. SKF make 1207EKTN9 |
| 10 | PALMER BLOCKS: a) Supply and fixing the C.I Palmer Block of shaft size 62.5 mm dia.(SKF make) |
| 11 | CLEANING AND REPAIRING OF FUEL DUCT PASSAGE:Removing the complete damaged R.S bricks and R.S slab of the (U.G) duct passage of the furnace chamber and thorough cleaning of the duct passage upto the start of brick build chimney by removing ash/carbon particles and relining the same with R.S Slabs & R.S bricks after mending good damages in the duct passages with insulation brick and red brick (1:4) with all necessary cementing masonry work |
| 12 | CLEANING AND REPAIRING OF FUEL DUCT PASSAGE: Supply &Fixing of R.S. slab after removing the same with necessary fire clay mortar. |
| 13 | HEATING ELEMENT: Supply and fixing the Heating element (Heatco make) of capacity 4.5 K.W to be working in supply voltage of 240 V 50 Hz made from 80/20 Nicrome wire of 8 SWG in coiled coil from welded S.S stud on both ends. The coil should be inserted into the groove of existing coil brick after proper cleaning and the S.S Studs housed into the ceramic caller tube wrapped. With asbestos rope for tight fitting and sealing as heat proof extended S.S stud to beconnected brass/ copper connector with complete connection in all respect of existing system. |
| 14 | HEATING ELEMENT: Supplying and fixing the terminal connector having drill holes for inserting S.S stud of 8.5 mm dia and connection point of existing copper wires of overall dimension 80mm long x25mm square shape. |
| 15 | TEMPERATURE CONTROLLER: a) Supply and fixing the digital type temperature controller of range (0-1200) deg. C of overall dimension 92 sq mm dia x 105mm depth having (CR-A1) heat sensor and 1 no + 1 N.C change over contact to be actuated at crossed of desired temperature in deg.C complete power supply unit of 230V 50 Hz.Blue Max make |
| 16 | THERMOCOUPLE: a) Supply and fixing the thermocouple of heat sensing range 0-1200 deg. C having (Cr-A1) sensor house in S. Sd 304 casing of dimension 1200 mm long x 22 mm OD complete encased in to it and fitted terminal on other end for connection ofcompensating wire. Heatco make |
| 17 | COMPENSATING WIRE: Supply, laying drawing of 2 core 0.5 sq mm CR-A1 compensating wire for heat sensing from thermocouple to temperature controller covered with asbestos embedded tape (Flame India make) |
| 18 | RATE AS PER UNIFIED SCHEDULE OF RATES (M&E), (PART-A)IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF W.B, ITEM NO. 5.1.F-1 (PAGE 83): SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF FOLLOWING ITEMS FOR HOISTING SYSTEM AND GEAR BOX AS MENTIONED BELOW AS PER DIRECTION INCLUDING COST OF MATERIALS, MACHINARIES , MANPOWER, CUTTING, MACHINING, ALIGNING, ANCHORING, WELDING, FINISHING, CONSUMABLES, CARRIAGE AND ALL OVERHEADS WITH ALL LEADS AND LIFTS COMPLETE AS PER SPECIFICATION (WITHOUT PAINTING):XII):TURNBUCKLE(MS) |
| 19 | RATE AS PER UNIFIED SCHEDULE OF RATES (M&E), (PART-A)IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF W.B, ITEM NO. 5.1.F-1 (PAGE 84): SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF FOLLOWING ITEMS FOR HOISTING SYSTEM AND GEAR BOX AS MENTIONED BELOW AS PER DIRECTION INCLUDING COST OF MATERIALS, MACHINARIES , MANPOWER, CUTTING, MACHINING, ALIGNING, ANCHORING, WELDING, FINISHING, CONSUMABLES, CARRIAGE AND ALL OVERHEADS WITH ALL LEADS AND LIFTS COMPLETE AS PER SPECIFICATION (WITHOUT PAINTING): XXXIV) MANUAL OPERATING MECHANISM; A. CHAIN |
| 20 | RATE AS PER UNIFIED SCHEDULE OF RATES (M&E), (PART-A)IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF W.B, ITEM NO. 5.1.F-1 (PAGE 84): SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF FOLLOWING ITEMS FOR HOISTING SYSTEM AND GEAR BOX AS MENTIONED BELOW AS PER DIRECTION INCLUDING COST OF MATERIALS, MACHINARIES , MANPOWER, CUTTING, MACHINING, ALIGNING, ANCHORING, WELDING, FINISHING, CONSUMABLES, CARRIAGE AND ALL OVERHEADS WITH ALL LEADS AND LIFTS COMPLETE AS PERSPECIFICATION (WITHOUT PAINTING): XXXIV) MANUAL OPERATING MECHANISM; B. SPROCKET (ALOY STEEL) |
| 21 | RATE AS PER UNIFIED SCHEDULE OF RATES (M&E), (PART-A)IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF W.B, ITEM NO. 5.1.F-1 (PAGE 84): SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF FOLLOWING ITEMS FOR HOISTING SYSTEM AND GEAR BOX AS MENTIONED BELOW AS PER DIRECTION INCLUDING COST OF MATERIALS, MACHINARIES , MANPOWER, CUTTING, MACHINING, ALIGNING, ANCHORING, WELDING, FINISHING, CONSUMABLES, CARRIAGE AND ALL OVERHEADS WITH ALL LEADS AND LIFTS COMPLETE AS PER SPECIFICATION (WITHOUT PAINTING): XXXIII) M.S MANUAL OPERATING HANDLE. |
| 22 | RATE AS PER UNIFIED SCHEDULE OF RATES (M&E), (PART-A) IRRIGATION & WATERWAYS DEPARTMENT, GOVT. OF W.B, ITEM NO. 5.1.B-2 (PAGE 74): COST FOR ARRANGEMENT OF HOLDING THE DAM / BARRAGE GATE AND ITS COUNTER WEIGHT BY SPECIAL FIXURES, TOOLS AND TACKLES, CHAIN PULLEY BLOCK AND HEAVEY SCAFFOLDING ETC AS PER REQUIREMENT FOR PERFORMING REPAIRING WORKS AT THE SITE. THE COST INCLUDES COST OF MAMPOWERS, HIRE CHARGES OF T&P, CHAIN PULLEY BLOCKS, SCAFFOLDING, AND OVERHEAD COST ETC TO COMPLETE THE JOB AS PER DIRECTION OF ENGINEER IN CHARGE; B) GATE SHUTEER SIZEABOVE 10 SQ.M UP TO 20 SQ.M |
| 23 | Sub Total |
| 24 | GST 18% |
| 25 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender