Tender For Laying Of Supplementary Distribution Pipe Line As Per Reviseddesign & Drawing And Reconnection Of functional house hold tap connection For Gobindapur Pwss At Jagatballavpur Block Under Howrah Sadar Sub Division Of Howrah Division , P.H.E.
Tender Value
94.49 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
8 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Of Supplementary Distribution Pipe Line As Per Reviseddesign & Drawing And Reconnection Of functional house hold tap connection For Gobindapur Pwss At Jagatballavpur Block Under Howrah Sadar Sub Division Of Howrah Division , P.H.E. Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, laying, fiting, fixing and jointing of UPVC pipes conforming to IS:4985-2000 with latest revision and amendments, if any, with necessary UPVC/CI specials, CIDF sluice valves, as per relevant I.S. specification including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder ,road sub-grade and its flanks but excluding moorum and laterite or sand stonehard arock including cutting of brick payment without damaging the existing telephone/electrical cable line etc.(in case of damage of any type of cable line during excavation, necessary damaged charges as applicable by the respaective authority will be borne by the agency in his own cost. Loading, unloading, carrying of pipes, specials, valves from the local store to work site and lowering laying of pipes specials valves carefully in trenches maintaining proper levels and alignment ,jointing the pipe and specials including supplying of good quality/approved brand solvent cement (as per IS:14182-1994 including cost of all fabricated PVC fitting i.e. tees,bend, reducers, adopter etc.as per IS:101-1988 and making flange joints including supplying required quantity of nuts, bolts and rubber insertion (CIDF sluice valves will be supplied by the department free of cost) as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150mm thk. with maintaining an average depth of cushion of 1.10mtr. from the top of pipe line including making interconnection with distribution pipes etc. all complete as per drawing direction and satisfaction of the E.I.C.N.B. i) Manufacturer’s test certificate for UPVC pipe & specials to be produced before laying of pipe linei) 3rd party inspection of UPVC pipe & specials to be done by CEPET or (India) SGS/NTH Kolkata or as per direction of EIC as per approved vender list. iii)No part payment at any stage on account of supply of materials shall be entertained.iv)Payment will be made on actual consumption of materials.v)UPVC pipes for the works to be supplied as per approved vendor list and as per direction & satisfaction of EIC. No pipes will be allowed beyond recommendated vendor list.vi)Submission of drawing of pipe line with statement of materials consumed between node to node points against each R.A. & final bill.if so. vii) Any deviation from required clear cover of 1.10mtr.due to site adverse condition, prior permission is to be obtained from EIC and payment for such work will be made on prorate basis over the rate of entire item. viii)All pipe connection shall be completed in all respect and as per directionof EIC. Decision of EIC in this respect is final & binding. In case of any deviation/or any left out pipe connections an amount ofRs.10,000.00 for each pipe connection will be realized/recovered from the bill. (A) Pressure Rating : Class - III (ii) Laying of pipe line including cost of pipe & fittings/specials but excluding cost of valves a) 75 mm dia (OD) |
| 2 | b) 90 mm dia (OD) |
| 3 | c) 110 mm dia (OD) |
| 4 | d) 125 mm dia (OD) |
| 5 | e) 140 mm dia (OD) |
| 6 | f) 160 mm dia (OD) |
| 7 | g) 180 mm dia (OD) |
| 8 | Filling the pipe line with water, testing hydraulically as per I.S 3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3, if contractor used water from deptt. source). For UPVC pipe a) 75 mm dia (OD) |
| 9 | b) 90 mm dia (OD) |
| 10 | c) 110 mm dia (OD) |
| 11 | d) 125 mm dia (OD) |
| 12 | e) 140 mm dia (OD) |
| 13 | f) 160 mm dia (OD) |
| 14 | g) 180 mm dia (OD) |
| 15 | Cleaning thoroughly the inner surface of pipe line including specials and valves by flushing with water and subsequently disinfection of the same pipe line by flushing again with water containing bleaching powder resulting in residual chlorine not less than 15mg/ltrs. after 24hrs. of such filling including laboratory testing of water samples obtain from the disinfested pipe line and disposal of water from the pipe line after completion of the work. The rates including of cost of requisite water to be arranged by the contractor) (The rate of water @Rs. 10/m3 may be recovered, if the contractor used water from deptt. source). For UPVC pipe a) 75 mm dia (OD) |
| 16 | b) 90 mm dia (OD) |
| 17 | c) 110 mm dia (OD) |
| 18 | d) 125 mm dia (OD) |
| 19 | c) 140 mm dia (OD) |
| 20 | d) 160 mm dia (OD) |
| 21 | e) 180 mm dia (OD) |
| 22 | Supply of G. I. pipes of TATA make including necessary sockets (i) 100 mm dia. (i) Medium quality |
| 23 | (iI) 125 mm dia. (i) Medium quality |
| 24 | (iii) 150 mm dia. (i) Medium quality |
| 25 | For existing FHTC with ferrule connection refining of existing ferrule with fittings in the proposed distribution pipe line & supply fittings & fixing, other acssesories like saddle piece of required size to fit the proposed pipeline, specials , nut & bolts , rubber sheet washers etc including cutting trenches in all sorts of soil & filling up trenches as per direction of the EIC (A) For upto 10.00 intr length |
| 26 | (b) Above 10 m upto 20 m length. |
| 27 | Supply fitting & fixing PTMT Bib Cock / Stop Cock ( Prayag or equivalante) 15 mm . |
| 28 | Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified]i) 80 mm to 150 mm dia pipe |
| 29 | Supply and delivery of CIDF sluice valve (PN-1.00 ) with cap IS 14846 -2000a) 80 mm Dia |
| 30 | b) 100 mm dia. |
| 31 | c) 125 mm dia. |
| 32 | d) 150 mm dia. |
| 33 | Making flange joint to DI/CI pipes, specials and valves where necessary with supply of required rubber insertion and nut bolts, washers etc. of approved quality and type all complete as per specification and direction of EIC (Nut and bolts shall be of TATA/GKW rate). a) 80 mm Dia |
| 34 | b) 100 mm dia. |
| 35 | c) 125 mm dia. |
| 36 | d) 150 mm dia. |
| 37 | Submission of complete detailed drawing of distribution system, rising main etc. after execution of work showing position of different types of valves, fittings/specials sluice valve chamber with location, node to node wise in the sanctioned drawing as completion drawing of the water supply scheme as per direction and satisfaction of EIC. The list of dia\ wise fitting/specials, different pipes ;of valve used in the rising main should be shown in the completion drawing (not separate) with verified by SAE & AE in-charge of the scheme. The above drawing will be submitted in 5 copies. |
| 38 | Bituminous pucca road (approx. 450mm depth) cutting by using gaiti, chisel, hammer etc. and picking uip the withdrawing excavated materials and remove the same within distance of 30mtr. at least all complete for fixing/crossing all dia of pipe line as per direction of EIC. |
| 39 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m In ground floor including roof.(a) upto 150 mm. thick |
| 40 | (A) Filling in foundation or plinth by silver sand in layer not exceeding 150mm as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 41 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 42 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (Avg.distance 40 km.)a) Pakur Variety.A) For Restoration of Road |
| 43 | ADD GST @ 18% |
| 44 | ADD CESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender