Tender For Supply,Delivery And Installation Of New Separate Chlorine Dosing Line For New Pre (60Kg/Hr) And Post (40 Kg/Hr) Chlorinator With Allied Works Under Wtp-Ii,Grww.
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
8 days left
EMD
9900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply,Delivery And Installation Of New Separate Chlorine Dosing Line For New Pre (60Kg/Hr) And Post (40 Kg/Hr) Chlorinator With Allied Works Under Wtp-Ii,Grww.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved makeconforming to IS-15778: 2007 . with all necessaryaccessories,specials viz. socket, bend, tee, union, cross,elbo,nipple,longscrew, reducing socket,reducing tee, short piece etc.fitted with holder bats clamps, including cutting pipes,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work(i) CPVC Pipes Class-1, SDR-11 (Dia) 50 mm |
| 2 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats ofpainting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made foraccesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipes (Dia) (h)80 mm |
| 3 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (i) 100 mm dia |
| 4 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia |
| 5 | Supply of Chlorinated Polyvinyl Chloride (CPVC)pipes & fittings conforming to IS-15778: 2007 (Z) Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings.(As per ASTMD 2467, Schedule 80)(Dia) (e) 50mm |
| 6 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.(This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each timeto be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height |
| 7 | Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips (4:2:1) and cement plaster (6:1) to match and curing complete in all respect. (viii) 80 mm |
| 8 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removingloose concrete by careful stripping untill hard surface is exposed,cutting the concrete to regular shape, wire brushing the exposedsurface and removing debris from site complete as per direction ofthe Engineer - in - Charge. |
| 9 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m? of concrete surface).Note: Applicable only when the full diameter of reinforcement steel is exposed. |
| 10 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding huttering and reinforcement,if any, in gound floor as perrelevant IS codes. Pakur variety? |
| 11 | Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints includingthroating, nosing and drip course, caffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 13 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement0.152 cu.m per100 sq.m. |
| 14 | ORDINARY CEMENT CONCRETE ( MIX 1:2:4 ) WITH GRADED STONE CHIPS ( 20 MM NOMINAL SIZE) EXCLUDING SHUTTERING AND REINFORCEMENT, IF ANY, IN GROUND FLOOR AS PER RELEVANT IS CODES |
| 15 | STRUCTURAL STEEL(MS)ANGLES,JOISTS,CHANNELS,FLATS ETC.(E 250 CONFORMS TO IS: 2062&808)A) UPTO 200 MM SIZE MT 46000.00PWD SCHEDULE OF RATES: 2015-16VOLUME-III: ROAD & BRIDGE WORKS14TH ADDENDA & CORRIGENDA, DATED: - 18/04/2018 |
| 16 | Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) |
| 17 | Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 18 | Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface.N.B.:(Payment against item (1, 2, 3, 4) of subhead B will be made only when done at specific direction of the Engineer- in-charge.Cost of taking out shutter etc.for this item and rehanging the same or changing glass panes cracked or broken in the operation will be deemed to be covered by the rate of this item and no seperatepayment therefore shall be made. |
| 19 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand paperingetc (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) |
| 20 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With supergloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 21 | SUPPLY & DELIVERY AT SITE OF PRESSURE GAUGE HAVING DIAL SIZE 150 MM.RANGE OF PRESSURE 0 TO 7KG/CM2 AND 0 TO 1KG/CM2 MODEL 6PSSSWA2 AND MADE OF DIE CASTALUMINAM, WATERPROOF , PAINTED STOVE ENAMELED BLACK FINISH SCREW INNER BEZEL OF ABS PLASTIC.REF : KMC APPROVED RATE DG(W/S),DTD. 21/08/2020 |
| 22 | 25 NB CS PIPE GRADE B WITH FITTINGSREF : KMC APPROVED RATE DG(W/S),DTD. 26/11/2018 |
| 23 | 20 NB CS PIPE GRADE B WITH FITTINGSREF : KMC APPROVED RATE DG(W/S),DTD. 26/11/2018 |
| 24 | Sub Total |
| 25 | ADD G.S.T @18% |
| 26 | ADD CESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender