Tender For Community Composit Pit At Kraloo Nlo Aadil Hussain Bhat To Nisar Bhat Sector :- Sbm-G 2026-27 Estimated Cost (Lakhs):- 4.30 Lacs Block:- Frisal Adv.Cost:- 4.22 Lacs
Tender Value
4.22 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
12 days left
EMD
12660
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Community Composit Pit At Kraloo Nlo Aadil Hussain Bhat To Nisar Bhat Sector :- Sbm-G 2026-27 Estimated Cost (Lakhs):- 4.30 Lacs Block:- Frisal Adv.Cost:- 4.22 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 2 | P/L dry stone solling hand packed in foundation including all charges and plums.and for soak pit. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Centring and shuttering including strutting, propping etc and removal of formwork foundation, footings, bases of columns etc for mass concrete |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto/above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 8 | Providing and Fixing hard drawn steel wire fabric mesh 25 mm x 25 mm size fixed and firmly anchored to steel frame |
| 9 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 10 | Providing and Fixing pre-coated galvanized iron high rib profile sheets of TATA/JINDAL (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 11 | Providing and Fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (450mm) |
| 12 | 12 mm cement plaster of mix 1:6 (1cement: 6 coarse sand) |
| 13 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick |
| 14 | Carriage of material from Source upto site of Work by Mechanical Transport Aggregates |
| 15 | Carriage of material from Source upto site of Work by Mechanical Transport Bricks |
| 16 | Providing and Fixing community Information Board & Painting SBM LOGO including Providing Geotagged Photographs of work before, during & after execution complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender