Tender For Construction Of Residential Room With Kitchen At Phc Safapora At Safapora-B Block Safapora Ddc 165
Tender Value
9.96 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
2 days left
EMD
20000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Residential Room With Kitchen At Phc Safapora At Safapora-B Block Safapora Ddc 165
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and laying of dry stone soling dully hand packed including watering, dressing, ramming with all carriages, loading, unloading and stacking etc complete |
| 3 | Provinding and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level in 1:4:8 mix (1cement: 4coarse sand: 68graded stone aggregate with 20mm nominal size) with all carriages, loading, unloading and stacking etc complete job |
| 4 | Provinding and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level in 1:3:6 mix (1cement: 3coarse sand: 6 graded stone aggregate with 20mm nominal size) with all carriages, loading, unloading and stacking etc complete job |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | Extra brick work in superstructure above plinth level upto floor V level |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: foundations, footings, bases for columns |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. |
| 13 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 14 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 15 | Providing wood work in frames, doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length KD WOOD with all leads and lifts and carriages |
| 16 | Providing and fixing panelled or panelled glaze shutters 4mm thick glass panes for windows including ISI marked MS pressed butt hinges of required size with necessar screws all complete as per directions of EIC 30mm thick with all leads lifts and carriages KD WOOD |
| 17 | Supplying and fixing glass panes 4mm thick with wooden fillets and nails |
| 18 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction ofEngineer-in-charge 30mm 30mm thick with KD WOOD |
| 19 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2MM THICK |
| 20 | Dry random rubble masonry with hard stone in foundation and plinth:without bond stone |
| 21 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 22 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Painting with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 25 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 16/18mm granite |
| 26 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. granite work |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 28 | Providing and fixing CP Brass wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 29 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 30 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :470x420mm bowl depth 178mm |
| 31 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 20mm OD(SDR-7.4) |
| 32 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc.PN-16 pipe , 20mm OD (SDR-7.4) |
| 33 | Providing and fixing PPR unions 20mm of standard make as per directions of EIC |
| 34 | Providing and fixing PVC Ball valve of standard make as per directions of EIC |
| 35 | Providing and fixing PVC ball cock set with aluminium rod and float ball of standard make as per directions of EIC |
| 36 | Providing and fixing PPR elbow 20mm of standard make as per directions of EIC |
| 37 | Providing and fixing floor traps incl all fittings of standard make as per directions of EIC |
| 38 | Providing, fixing and testing and commissioning of UPVC SWR pipes type B for soil wasteand vent conforming to IS 13592 along with all required fittings like tees, bends, cowls, crosses with or without access door jointed with approved solvent cement fixed to walls and ceiling inluding angle supports with clamps complete inxluding cutting holes in RCC/brick work and making good the floors beams and walls where required complete outer dia 75mm |
| 39 | Constructing brick masonary inspection chamber 300x300mm inside depth upto 600mm in brick work in cement mortar 1:4 mix RCC top slab with 1:2:4 mixfoundation in concrete in 1:4:8 mix inside olastering 12mm thick in cement mortar 1:3 mixwith fitting coat of neat cement and making channels complete including cost of manholes frame and cover cpmplete job |
| 40 | PTMT Soap dish / holder 138x102x75 mm |
| 41 | Carriage of materials by MT aggregate for an avg lead of 10km |
| 42 | Carriage of materials by MT sand for an avg lead of 10km |
| 43 | Carriage of materials by MT quarry stone for an avg lead of 10km |
| 44 | Carriage of materials by MT bricks for an avg lead of 45km |
| 45 | CIB, photographs, windows/door fittings and other unforeseen items |
| 46 | Wiring for light point/fan/exhaust fan point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq mm FRLS PVC insulated copper conductor single core cable etc as required |
| 47 | Wiring for circuit wiring light/ fan /exhaust/ etc along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (light point/fan point/exhaust fan point/call bell point) with 1Rx2Cx2.5sq mm+1x2.5sqmm earth wire for bormal light supply |
| 48 | Wiring forcircuit/ sub main along with earth wire with the following sizes of FRLSPVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required 2x4sq mm +1x4sq mm earth wire |
| 49 | Provision for electrical fixtures/fittings/recessed/surface mountedceilin 10/12 watt LED downlighters, ,CBs, sockets/switches, fan dimmers, modulare/bade cover plates Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender