Tender For Development Of High School Building (Polling Station)At Vohlutra Scheme: Apdp (2026-2027) ,Block Nadihal
Tender Value
4.97 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
10 days left
EMD
9956
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of High School Building (Polling Station)At Vohlutra Scheme: Apdp (2026-2027) ,Block Nadihal
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil including dewatering if any |
| 2 | Providing & laying cement concrete of specified gradeexcluding cost of centering & shuttering . All work upto plinth level (1: 4: 8) (1cement :4Coarse sand :8 graded stone aggregates 40mm nominial size crushed including cost and carriage of all materials involved complete incld.dewatering if any. |
| 3 | Demolishing cement concrete manually by mechanical means including disposal of material within 50mtr lead 1:3:6 mix or richer mix |
| 4 | Providing and laying of stone soiling (hand packed )including dressing ramming ,watering and all leads lifts and carriage upto site of work complete (including dewatering if any) |
| 5 | Structural steel work weldded in built up fixing in position .In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc..and applying a priming coat of approved steel primer all complete.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.i/c paint of grill work complete job |
| 6 | Structural steel work weldded in built up sections,in trusses .purlins etc i/c cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete.i/c paint work complete job |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture one or more coats on new work |
| 8 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on new work |
| 9 | Finishing Exterior walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm |
| 10 | P/F of 12mm thick ply wood including cost of nails |
| 11 | P/F of joist for ceiling of K.D wood |
| 12 | P/F of 50mm wide imported wooden cornice including cost of nails |
| 13 | Providing and fixing of CGI sheets colour coated for side Gable closing 0.40 mm thick |
| 14 | Providing corrugated G.S roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.50 mm thick |
| 15 | Providing ridges or hips of width 45cm overall width plain sheetsfixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.0.50 mm thick |
| 16 | Providing and fixing Stainless Steel kitchen sink with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200mm. |
| 17 | P/f of 1200mm sweep ceiling fan of approved qulaity and make incl. cost of fandimmer and M.S hooks (if required) complete (USHA, Havells or eq.make) |
| 18 | P/F of glass pans 3.5mm thick including cost of beading and nails |
| 19 | Chequerred cement tiles 22mmthick in footpath and courtyard ,jointed with neat cement slurry mixed with pigment to match the shade of the tile ,including rubbing ,cleaning and curing complete on 20mm thick cement bed of mortar in 1:4 mix with all carriages |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on cement bed in 1:4 mix including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm |
| 21 | Carriage of material by mechanical transport Sand, from av. Lead (5Km) |
| 22 | stone agg av. lead (15Km) |
| 23 | Add provision for Citizen Information board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender