Drinking Water Supply and Sanitation Government Departments Closing in 19 days TDR #56528474

Bids Are invited for Custom Bid For Services - Repairing And Renovation Of Boundary Wall (Backside) At Lower Brahmaputra Division, Central Water Commission, Jalpaiguri - Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designati

Issued by Government Departments · Jalpaiguri, West Bengal
Tender Value
9.42 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
19 days left
EMD
18849
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Bids Are invited for Custom Bid For Services - Repairing And Renovation Of Boundary Wall (Backside) At Lower Brahmaputra Division, Central Water Commission, Jalpaiguri - Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundations And Plinth In : Level Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour 13.82.2 Two Coats , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work In Ground Floor:(Iii) Two Coats. , Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces), Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 12.1.2 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting S Les From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments,Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Upto 90 Metre Depth Below Ground Level. 23.1.1 All Types Of Soil.23.1.1.1 300 Mm Dia , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge 23.3.2 150 Mm Nominal Size Dia , Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine/ Medium/ Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. , Providing And Placing In Position Hand Pump Of Approved Quality For 40 Mm Diameter G.I. Pipe Complete With All Accessories. , Providing And Placing In Position Filters Of 40 Mm Diameter G.I. Pipe With Brass Strainer Of Approved Quality. , Providing And Fixing To Filter And Lowering To Proper Levels 40 Mm G.I. Pipe For Tube Well Including Cleaning And Priming The Tube Well. , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approvedquality (Screwed End) :18.17.3 40 Mm Nominal Bore , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) :18.46.5 40 Mm Nominal Bore , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundations And Plinth In : Level Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 4.1.5 -1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Neat Cement Punning. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. 2.6.1 All Kinds Of Soil

BOQ

Sl. No. Item TitleItem Description
1Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
2Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : level cement mortar 1:4 (1 cement : 4 coarse sand)Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : level cement mortar 1:4 (1 cement : 4 coarse sand)
312 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
4Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour 13.82.2 Two coatsWall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour 13.82.2 Two coats
5Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work In ground floor:(iii) Two coats.Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work In ground floor:(iii) Two coats.
6Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.2 0.63 mm thick with zinc coating not less than 275 gm/m²Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.2 0.63 mm thick with zinc coating not less than 275 gm/m²
7Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments,tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil.23.1.1.1 300 mm diaBoring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments,tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 23.1.1 All types of soil.23.1.1.1 300 mm dia
8Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge 23.3.2 150 mm nominal size diaSupplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge 23.3.2 150 mm nominal size dia
9Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
10Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.
11Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.
12Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well.Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well.
13Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) :18.17.3 40 mm nominal boreProviding and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) :18.17.3 40 mm nominal bore
14Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :18.46.5 40 mm nominal boreProviding and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :18.46.5 40 mm nominal bore
15Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : level cement mortar 1:4 (1 cement : 4 coarse sand)Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : level cement mortar 1:4 (1 cement : 4 coarse sand)
16Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.5 -1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.5 -1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
1712 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
18Neat cement punning.Neat cement punning.
19Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soilEarth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil

AI Tender Summary

OUR REF NO 56528474
AUTHORITY Government Departments
TENDER VALUE 9.42 Lakhs
LAST DATE 07-08-2026
Authority
Authority Name Central Water Commission
Work Description Bids Are invited for Custom Bid For Services - Repairing And Renovation Of Boundary Wall (Backside) At Lower Brahmaputra Division, Central Water Commission, Jalpaiguri - Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundations And Plinth In : Level Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour 13.82.2 Two Coats , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work In Ground Floor:(Iii) Two Coats. , Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces), Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 12.1.2 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting S Les From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments,Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Upto 90 Metre Depth Below Ground Level. 23.1.1 All Types Of Soil.23.1.1.1 300 Mm Dia , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge 23.3.2 150 Mm Nominal Size Dia , Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine/ Medium/ Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. , Providing And Placing In Position Hand Pump Of Approved Quality For 40 Mm Diameter G.I. Pipe Complete With All Accessories. , Providing And Placing In Position Filters Of 40 Mm Diameter G.I. Pipe With Brass Strainer Of Approved Quality. , Providing And Fixing To Filter And Lowering To Proper Levels 40 Mm G.I. Pipe For Tube Well Including Cleaning And Priming The Tube Well. , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approvedquality (Screwed End) :18.17.3 40 Mm Nominal Bore , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) :18.46.5 40 Mm Nominal Bore , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundations And Plinth In : Level Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 4.1.5 -1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Neat Cement Punning. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. 2.6.1 All Kinds Of Soil
Basic Detail
Tender No GEM/2026/B/7799686
Bidding Type Tender
Location
City Jalpaiguri
State West Bengal
Key Dates
Publish Date 17 Jul 2026
Submission Date 07 Aug 2026
Open Date 07 Aug 2026
Finance
Tender Value 9.42 Lakhs
Tender Fee Ref. Documents
EMD 18849
Exemption Available
Document List
1b17eea4-0376-4736-8512-ef06845cc2fc.pdf
1784268640.xlsx
1784268829.pdf
1784268850.pdf
1784268860.pdf
1784284653.pdf
1784284671.pdf
1784284709.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Aug 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
pdf

1b17eea4-0376-4736-8512-ef06845cc2fc.pdf

xlsx

1784268640.xlsx

pdf

1784268829.pdf

pdf

1784268850.pdf

pdf

1784268860.pdf

pdf

1784284653.pdf

pdf

1784284671.pdf

pdf

1784284709.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders