Tender For Construction Of Retaining Wall At. Visaghar (Ambavane), Tal. Mulshi, Pune
Tender Value
58.76 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
9 days left
EMD
58770
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Retaining Wall At. Visaghar (Ambavane), Tal. Mulshi, Pune
BOQ
| Sl. No. | Item Description |
| 1 | 1. NAME OF SUB WORK- work portionITEM NO.:1 Removing rich mix cement concreteincluding stacking the spoils as directed with all leads,lifts etc. complete....(INo46-13,PgNo 296) ( STATESSR ) Item Spec: (As directed by Engineer in charge) |
| 2 | ITEM N0.:2 Excavation for roadway in earth, soil of allsorts, sand, gravel or soft murum including dressingsection to the required grade, camber and side slopesand conveying the excavated I materials with all lifts uptoa lead of 50m. and spreading for embankment or.(INo2-11, PgNo 24) ( STATEstacking as directed...( |
| 3 | ITEM NO.:3 Excavation for roadway in hard murum (including dressing section to the required grade,camber and side slopes and conveying the excavatedmaterials with al lifts upto a lead of 50m.and spreadingTor embankment or stacking as directed |
| 4 | ITEM N0. :4 Excavation for roadway in hard rock bywedging & chiselling or line drilling including dressingsection to the required grade, camber and side slopesand conveying the excavated materials with all lifts uptoa lead of 50m. and spreading for embankment orstacking as directed.. |
| 5 | ITEM NO. :5 Providing and laying Cast in situ/ReadyMix cement concrete in M-10 of trap/ granitel quartzitelgneiss metal for foundation and bedding includingbailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if specialfinish is to be provided, finishing if required and curingcomplete, with fully automatic micro processor basedPLC WITHOUT SCADA enabled reversible Drum Typemixer/concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate ( Crushed sand VSIGrade finely washed ). |
| 6 | ITEM NO. :6 Providing and laying in situ /Ready Mixcement concrete M-20 of trap /granite lquartzite/gneiss metal for R.C.C. work in foundations like raft,strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc. including bailing outwater, Steel centering formwork, laying/pumping cOverblocks, compaction and curing roughening the surface ifspecial finish is to be provided (Excluding reinforcementand structural steel) etc. complete, with fully automaticmicro processor based PLC WITHOUT SCADAenabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With fineaggregate (Crushed sand VSI Grade finely washed). |
| 7 | ITEM NO.:7 Providing cast in situ / ready mix M20grade cement concrete for head walls of CD workretaining walls etc. including necessary form work,compaction, finishing and curing etc. complete. (withreversible drum type mixerl concrete batch mix plant(pan mixer) WITHOUT SCADA with fine agreegates ofrequired specifications (Natural sand/ VSl sand finelywashed etc / Crushed Sand ). |
| 8 | ITEM NO. :8 Providing and laying Cast in situ/ReadyMix cement concrete in M-20 of trap l quartzite lgranitelgneiss metal for R.C.C.newel posts of staircase as perdetailed design and drawings including steel centering.plywood / steel formwork, steel props, laying / pumping,compaction, finishing uneven and honeycombedsurface with C.M.1:3 of sufficient minimum thickness togive a smooth and even surface or roughening thesurface if special finish is to be provided and curing etc.complete. (Excluding reinforcement, including coverblock). (Newly laid concrete shall be covered by gunnybag, plastic, tarpaulin etc.) with fully automatic microprocessor based PLC WITHOUT SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade finely washed )... |
| 9 | ITEM NO. :9 Providing and laying Cast in situ/ReadyMix cement concrete M-20 of trap / granite lquartzite/gneiss metal for R.C.C. columns as per detaileddesigns and drawing or as directed including steelcentering, formwork, cover blocks, laying/pumping.compaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimum thickness to give asmooth and even surface or roughening if special finishis to be provided and curing etc. complete, (Excludingreinforcement and structural steel).with fully automaticmicro processor based PLC WITHOUT SCADAenabled reversible Drum Type mixer/ concrete Batchmix plant (Pan mixer) etc. complete. With fineaggregate (Crushed sand VSI Grade finely washed). |
| 10 | ITEM NO.: 10 Providing and laying Cast in situ/ReadyMix cement concrete M-20 of trap / granite /quartzite/gneiss metal for R.C.C. beams and lintels as perdetailed designs and drawings or as directed includingsteel centering, formwork, cover blocks,laying/pumping, compactionand roughening the surfaceif special finish is to be provided and curing etc.complete. (Excluding reinforcement and structuralsteel). with fully automatic micro processor based PLCWITHOUT SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSIGrade finely washed ).. |
| 11 | ITEM NO.: 11 Filling in plinth and floors with approvedexcavated material in 15cm. to 20cm. layers includingwatering and compacting etc. complete. |
| 12 | ITEM NO. : 12 Providing and laying cement concretepipe of IS 458:2003 NP-2 class 450mm diameter inproper line, level and slope including providing andfixing collars in cement mortar 1:2 and curing etc.complete.. |
| 13 | ITEM NO.: 13 Providing and laying cement concretepipe of IS 458:2003 NP-2 class of 600mm diameter inproper line, level and slope including providing andfixing collars in cement mnortar 1:2 and curing etc.complete. |
| 14 | ITEM NO. : 14 Providing second class Burnt Brickmasonry with conventional/ I.S. type bricks in cementmortar 1:6 in superstructure including striking joints,raking out joints, watering and scaffolding etc.Complete.. |
| 15 | ITEM NO. : 15 Providing sand faced plaster externallyin cement mortar using approved screened sand, in allpositions including base coat of 15 mm thick in cenentmortar 1:4 using waterproofing compound at 1 kg percement bag curing the same for not less than 2 daysand keeping the surface of the base coat rough toreceive the sand faced treatment 6 to 8 mm thick incement mortar 1:4 finishing the surface by taking outgrains and curing for fourteen days scaffoldingetc.complete.. |
| 16 | ITEM NO. : 16 Providing & constructing Brick MasonryInspection Chamber 90cm x 45cm x 90cm including1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, BrickMasonry, plastering from inside and C.L. lid cover 75 Kgwith frame fixed in cement concrete. |
| 17 | ITEM N0.:17 Providing, laying, spreading andCompacting stone aggregates of specific sizes to waterbound macadam specification including spreading inuniform thickness, hand packing to proper grade andcamber, applying and brooming requisite type ofSCreening/ binding Materials to fill up the interstices ofcoarse aggregate, watering and compacting withVibratory roller. to the required density, By MechanicalMeans - Grading I (Using Screening Type A (13.2) mmAggregate). |
| 18 | ITEM NO. 18 Providing and laying in situ cementconcrete M -30 with tremix treatment for 200 mmthickness for Concrete Road is including laying plasticsheet for 125 micron thickness with groove cutting of 4mm wide and 20 mm deep with necessary refilling withbitumen ( excluding reinforcement) with coarse and fineaggregate ( Natural Sand / VSl grade finely washedCrushed sand) etc. complete |
| 19 | ITEM NO.: 19 Providing and fixing in position TMT - FE500 bar reinforcement of various diameters for R.C.C.pile caps, footings, foundations, slabs, beams columns,canopies, staircase, newels, chajas, lintels pardis,copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending,hooking the bars, binding with wires or tack welding andsupporting as required complete. |
| 20 | ITEM NO. 20 Providing and applying two coats ofexterior white weather shield paint of approvedmanufacture and of approved colour to the plasteredsurfaces including cleaning ,preparing the plasterSurface ,applying primer coat ,scaffolding if necessary.and watering the surface for two days etc complete.NOTE: For Item No. 15 to 18 prior approval ofSuperintending Engineer will be necessary. |
| 21 | ITEM NO. :21 Providing and fixing bituminous pad25mm thick for expansion joints in retaining wall,compound wall etc. complete. |
| 22 | ITEM NO.: 22 Providing dry/ trap/ granitel quartzite/gneiss rutbble stone soling 15 cm to 20 cm thickincluding hand packing and compacting etc.complete. |
| 23 | ITEM NO. :23 Providing and laying of filter media withgranular materials/ stone crushed aggregates satisfyingthe requirements laid down in clause 2504.2.2 ofMoRTH specifications a thickness of not less than600 mm with smaller size towards the soil and biggersize towards the wall and provided over the entiresurface behind abutment, wing wall and return wall tothe full height compacted to a firm condition as perdrawing and technical specifications etc.Complete. |
| 24 | ITEM N0. :24 Providing structural steel work in hollowsection of various thickness and sizes in square,rectanular and round shape from 25mm to 450mmsection as per IS 4923 YST 310 Grade produced fromiron ore and blast furnace route etc. as per detaileddesigns and drawing or as directed including cutting,fabricating, hoisting, erecting, fixing in position, makingriveted/bolted/ welded connections and paintingcomplete |
| 25 | ITEM NO.: 25 Construction of dry lean cementconcrete Sub- base over a prepared sub-grade withcoarse and fine aggregate ( Natural Sand / VSI gradefinely washed crushed sand ) conforming to IS: 383, thesize of coarse aggregate not exceeding 25 mm,cement content not to be less than 150 ka/ cum,optimum moisture content to be determined during triallength construction, concrete strength not to be lessthan 10 Mpa at 7 days, mixed in a batching plan/Weigh batch mixer, transported to site with all leadsand lifts, laid witha paver with electronic sensor /bysuitable means as approved by Engineer-in-chargecompacting with vibratory roller, finishing, curing andincluding preparation of sub-grade surface if requiredetc. complete. |
| 26 | ITEM NO.:26 Providing earth work in embankmentwith approved materials obtained from other sourcesupto lead of 50m. including all lifts, laying in layers of20cm. to 30cm. thickness breaking clods, dressing tothe required lines, curves, grades & section, wateringand compaction with vibratory roller with V-Satattachmnent to achieve not less than 97 % of standardproctor density etc. complete ( Material obtained fromOther sources) |
| 27 | ITEM NO. : 27 Supplying hard murum/ kankar at theroad site, including conveying and stackingcomplete. |
| 28 | ITEM NO.: 28 Metal Beam Crash Barrier -- Type - A, WMetal Beam Crash Barrier (Providing and erecting a Wmetal beam crash barrier comprising of 3 mm thickcorrugated sheet metal beam rail, 70 cm abOveroad/ground level, fixed on lSMC series channel verticalpost, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 Pm high, 1.1 m below ground/road level, all steel partsand fitments to be galvanised by hot dip process, allfittings to conform to IS:1367 and IS:1364, metal beamrail to be fixed on the vertical post with a spacer ofchannel section 150 x 75 x 5 mm, 330 mm longcomplete as per clause 810).. |
| 29 | ITEM NO.:29 Providing and fixing board displayinginformation, such as 'Name of work, Tender cost, Nameof Contractor, Work completion and liability period etc',having rectangular shape of 1.20m x 0.90m size madeout 18 gauge (1.25mm) thick mild steel sheet paintedwith one coat of Zinc chromate stoving primer and twocoats of enamel paint on front side and grey stoveenamel on back side and border / messages / symbolsetc. with approved colour shade paint complete, onM.S.angle of size 35 x 35 x 3 mm frame with properlycross braced M.S. angles of size 35mmx35mmx3mmduly painted including Two M.S. angle iron posts of size65 mm x 65 mm x 6 mm, 3.65 m long painted withalternate black and white bands of 25 cm widthincluding all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including.excavation, refilling, transportation, and labour etccomplete. Spec. No. As directed by Engineer inCharge |
| 30 | 2. NAME OF SUB WORK -Royalty Charges EstimateITEM NO.:1 Royalty Charges for HARD MURUM. Rate= Royalty + surcharge (2%) (211.95 + 4.23 = 216.18Per Cum). |
| 31 | 3.NAME OF SUB WORK - Testing Charges EstimateITEM NO.:1 CONCRETE Compressive Strength OFc.C. Cube(Set of 3 cubes). |
| 32 | ITEM NO.:2 STEEL BAR TESTING Upto 16 mm (Setof 3 Bars).. |
| 33 | ITEM NO.:3 BASIC TEST OF AGGREGATE. SieveAnalysis.. |
| 34 | ITEM NO.4 Hard Murum Sieve analysis Test Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender