Tender For Improvement Of 2Nd Storey Of Cfc Building Tujjer Shareef (Pyt Halqa Tujjar A) Under Adp (Bdc) 2026-27
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
16 days left
EMD
9998
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of 2Nd Storey Of Cfc Building Tujjer Shareef (Pyt Halqa Tujjar A) Under Adp (Bdc) 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | P/F PVC Pannelling 10 inch wide and 6 mm thick on walls including all necessary fittings,screws etc.PVC concave type cornice 1\\"*1\\" along innerside perimeter at top bottom and corners inside the rooms/corridors etc inc jambs and sills of standard quality as approved by engineer incharge inc all carraiges upto SOW |
| 2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc.complete Size of tile 600x600 mm |
| 3 | Providing and fixing glass panes with glazing clips,wooden fillets in wooden doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes |
| 4 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-incharge In cement mortar including fixing of frame work of vent and door |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 6 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 7 | Fabrication of Cabins/almirahs 24 inch deep made up of 19mm thick block board (ply to ply) frames, shutters, shelves and 12mm thick backboard including sunmica lining on outer/inner surface (all sides) incl. providing support brackets etc and fixing of necessary hardware fittings viz. locks, tower bolts, handles, catchers etc complete as directed by site engineer. |
| 8 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 9 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete-welded |
| 10 | Painting wood/wall work with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 11 | P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc \\"B type\\" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest) |
| 12 | P/F CP Brass Bib Cock 15mm of approved quality |
| 13 | P/F CP Angle valve 15mm Nominal Bore concealed type Jaquar or Equivalent. |
| 14 | P/F PVC water storage tank Tripple layer Sintex or equvalent make |
| 15 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) |
| 16 | P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete PPR Union 20mm |
| 17 | Tank nipples 20mm dia |
| 18 | P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete |
| 19 | 100mm Dia |
| 20 | 75mm Dia |
| 21 | P/F PVC fittings of standard quality type |
| 22 | Door Junction (100mm x100mm ) |
| 23 | Door Bend (75mm x 75mm) |
| 24 | Floor Trap (100mm) |
| 25 | Collar 100mm with rubber washer |
| 26 | Collar 75mm with rubber washer |
| 27 | Plain Bend 100mm |
| 28 | Plain Bend 75mm |
| 29 | Reducer 100mm to 75mm |
| 30 | P/F of lighting points as well as lighting circiut incl. point wiring through conduits with 1.5 Sqmm Multi Standard copper wire of approved make for light points and 2.5mm for heating point incl. cutting charges and making good the wall, cost of 6 amp switch, conduits, switch pannel,concealed lights 9 watt incl. resurfacing of wall with POP complete job.(subject to Actual) |
| 31 | Bricks from Budgam for 50 km lead |
| 32 | Provision for CIB and PHOTOGRAPHS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender