Tender For Construction Of Community Sanitary Complex Near Masjid Sharief W.No.6. Block :- Jakyas
Tender Value
1.45 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
0 days left
EMD
2912
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex Near Masjid Sharief W.No.6. Block :- Jakyas
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Dry random rubble stone masonary with hard stones in foundation and plinth. |
| 4 | Random Rubble Stone masonry with hard stones in superstructure above plinth level and upto floor five level. including levelling up with cement concrete 1:6:12 ( 1 Cement : 6 course sand : 12 graded stone aggregates 20mm nominal size) upto plinth level and curing complete with cement mortar 1:6 ( 1 Cement : 6 coarse sand. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete in beams suspended floors including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Providing and applying 6mm thick cement plaster in 1:3 mix mortar excluding cost and carriage of materials |
| 9 | Providing and applying 20mm thick cement plaster in 1:6 mix mortar excluding cost and carriage of materials |
| 10 | Finishing walls with water proofing cement paint of required shade on new works(two or more coats applied @3.84 kg/10 sqm. |
| 11 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 12 | Providing and laying in position specified grade of cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Filling available excavated earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth cosolidating each deposited layer by ramming and watering lead up to 50m and lift upto 1.5m. |
| 14 | Steel work welded in built up sections/frame work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in grating frames guard bar ladder railings brackets and similar works. |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work. |
| 16 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS; 13592 Type B including jionting with seal ring conforming ti IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes 75mm diameter. |
| 17 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal dia pipes. |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for PVC water tank . |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 21 | Providing and fixing PVC low level flush cistern with manually controlled device (handle lever) conforming to IS : 7231 with allfittings and fixtures complete. 10 litre capacity white. |
| 22 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 23 | Providing and fixing PVC waste water pipe for sink and wash basin including PVC waste fittings complete. Flexible pipe 32mm dia. |
| 24 | Providing and fixing PTMT waste coupling of approved quality and colour for wash basin 31mm with 79mm in length and 62mm in breadth weighing not less than 45 gms. |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. (a) Suspended floors, sofits landings etc. |
| 26 | (c) Edges of slabs. |
| 27 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 28 | Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 29 | Carriage of Sand |
| 30 | Carriage of aggregates |
| 31 | Carriage of stones |
| 32 | Providing and fixing External/ Internal electric connections including wiring from Service Main and internal wiring, Switch Boards incl. switches as per requirement, 3 no. Holders alongwith LED bulbs, Junction boxes, conduit pipes/battens etc. All complete job. |
| 33 | CIB (citizen information Board ) size 4'0\\"x5'0\\"x0'9\\" (above plinth level) with tepered top having 20 degree slope in Brick Masonary(1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of material. ( complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender