Tender For Advertized Rate List/Bill Of Quantity For Construction Of Sub Centre At Goripora......................Advertized Cost Rs.49.30Lacs
Tender Value
49.30 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
7 days left
EMD
98600
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List/Bill Of Quantity For Construction Of Sub Centre At Goripora......................Advertized Cost Rs.49.30Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Site clreance By way of removing of Stems /Roots Trees Cutting etc including disposal upto all leads and lifts complete. |
| 2 | Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work. |
| 3 | Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) including all carriages. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns incld carriage. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. including all carriages. |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. including all carriages. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages. |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Cement mortar 1:6 ( 1 cement : 6 coarse sand) insuperstructure above plinth level upto floor five level incld all carriages complete. |
| 13 | 12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages. |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete, Size of tile 600x600 mm, including all carriages. |
| 15 | Providing and laying Ist class Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:3 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown, including all carriages. |
| 16 | Providing and applying plaster of paris putty of 2mmthickness over plastered surface to prepare the surfaceeven and smooth complete including all carriages |
| 17 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications.Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incld carriage. |
| 18 | Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class Kail wood including all carriages |
| 19 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood including all carriages. |
| 20 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type with carriage. |
| 21 | Providing Glass Panes 4 mm thick windows/Crestory windows (Area of opening for glass Panes excluding portion inside shall be measured) includin nails, beading with carriage. |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Second class Kail wood incld carriage. |
| 23 | Dry random rubble masonry with hard stone in foundation and plinth. With bond stone incld carriage. |
| 24 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) incld carriage. |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture with carriage.. |
| 26 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) with carraige. |
| 27 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages. |
| 28 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 with carriage. |
| 29 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 30 | Providing and laying concealed/recessed rigid PVC conduit of suitable size for electrical wiring, including providing and fixing fan junction boxes, deep junction boxes, inspection boxes, bend, tees, couplers, saddles, bushes, draw boxes and all other required accessories, complete with cutting chases, making openings, fixing in position, tying with reinforcement wherever required, making good the damaged surfaces with cement mortar, testing for free drawing of wires, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings and as directed by the Engineer-in-Charge |
| 31 | Providing and fixing 16 mm , 0.225 m long half-thread truss bolts conforming to relevant IS specifications, complete with hexagonal nut, plain washers on both sides and spring washer, including drilling holes wherever required, inserting and fixing the bolts in position, aligning, tightening to the required torque, and completing the work with all materials, labour, tools and tackles, scaffolding, carriage, wastage, and all incidental charges complete, as directed by the Engineer-in-Charge. |
| 32 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 20mm OD(SDR-7.4) including carriage. |
| 33 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe, 16mm OD(SDR-7.4) including carriage. |
| 34 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work-exposed on wall with clamps at 1.00 meter spacing. PN-16 pipe , 25mm OD(SDR-7.4) OD(SDR-7.4) including carriage. |
| 35 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including carriage.. |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank with carriage. |
| 37 | Providing and fixing of following PVC Pipes/Fittings like Bends ,collars etc of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete. 100 mm dia Pipe. |
| 38 | Providing and fixing of following PVC Pipes/Fittings like Bends ,collars etc of Approved Brand ( Prince/Phinolex or equivalent B-type) incld trenching and refilling all complete. 75 mm dia Pipe. |
| 39 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests with carriage.. |
| 40 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab over 0.5 sqm).16 mm thick including carriage. |
| 41 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm includin carriage. |
| 42 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms with carriage. |
| 43 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms with carriage.. |
| 44 | Providing and fixing 100 mm dia floor trap of approved make and quality,water seal, necessary fittings and accessories, including cutting and making good the floor wherever required, jointing with the waste pipe using approved materials, testing for leak-proof performance, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings and as directed by the Engineer-in-Charge with carriage. |
| 45 | Providing and fixing 100 mm diameter cast iron grating for gully trap, of approved make and quality, including all necessary fixtures, cutting and fitting wherever required, complete with carriage of materials, labour, tools and tackles, and all incidental charges, complete as per the approved drawings and as directed by the Engineer-in-Charge. |
| 46 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone With common burnt clay (non modular) bricks of class designation 7.5 includin carriage. |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore including carriage. |
| 48 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) .20 mm nominal bore including all carriages. |
| 49 | Poviding and fixing of approved quality water heater (Geyzer) (Venus / Racold) abs body type brand, including standard quality fixtures and fittings etc; cost and carriage complete 50 ltr Capacity. |
| 50 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with carriage. |
| 51 | Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages. |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 including all fittings and fixtures complete. |
| 53 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets ofthe same materials with snap fittings of approved quality and colour, weighing not less than 105 gms with all carriages complete. |
| 54 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Rectangular shape 453x357 mm including carriage. |
| 55 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms with carriage. |
| 56 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.T.Bolt 100. |
| 57 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.T.Bolt 150. |
| 58 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.Handles 125 mm. |
| 59 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.Handles 150 mm. |
| 60 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with carraige. |
| 61 | Providing and fixing approved make, ISI marked standard quality hardware fittings for doors, windows and ventilators, such as hinges, tower bolts, sliding bolts, aldrops, handles, mortice locks, hasp and staple, door stoppers, door closers, hooks, eyelets, screws and other necessary accessories, complete with all fixtures and fastenings, including fitting, fixing, alignment, carriage of materials, labour, tools and tackles, and all incidental charges, complete as per approved drawings, specifications and as directed by the Engineer-in-Charge.Almunium Window Hooks. |
| 62 | Supply ,stacking, filling,laying and spreading of Nallah Muck in Floors incld sorting ,spreading to templete ,watering ,dresssing ,ramming and consolidation incld. all carriages complete |
| 63 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) with carriage. |
| 64 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete including all carriages. |
| 65 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including all carriages. |
| 66 | Carriage of Material By Mechanical Transport Avg Lead 25 Km.Stone Aggregrate Below 40 mm and Sand Quantity. |
| 67 | Electrification:Providing and Electric fitting as per details. One lighting point includes point with wiring in 1.5 sq mm PVC insulated copper wire and 2.5 mm PVC multistrand copper wire, 6 amp one way switch in recessed PVC conduits laid in slab with bends, junction boxes etc, 6 amp S pole MCB, 10 amp with switches all complete job with carriage. |
| 68 | One Heating point includes 03 pin heating socket with wiring in 2.5 sq mm PVC insulated copper wire and 4.00 sq mm PVC multistrand copper wire, 16 amp one way switch in PVC conduits/Channel with bends, junction boxes etc, 6 amp S pole MCB, 10 amp with switches all complete job with carraige. |
| 69 | One Fan point includes one fan with wiring in 2.5 sq mm PVC insulated copper wire and 4.00 sq mm PVC multistrand copper wire, 1200 mm ceiling fan with dimmer in PVC conduits/Channel with bends, junction boxes etc, 6 amp S pole MCB, 10 amp with switches all complete job with carriage. |
| 70 | Supply and fixing of MCB 18 Way Horizontal typed sheet steel Double Door Distribution Board, SP 240 V, on surface recess complete with tinned copper bus bar, neutral bus bar, earth bar, DIN bar, interconnections, powder painted including earthing etc as required (L&T/Siemens/Legrand/Schneider/ABB/EQ Make) with carriage. |
| 71 | Providing and fixing of PVC Conduits 25 mm dia of approved quality including cost of bends, fixtures all complete job with carrage. |
| 72 | Providing and fixing of Deep junctions for lamps laid in slab with carraige. |
| 73 | Providing and fixing of Deep junctions for fans laid in slab with carraige. |
| 74 | Supply/laying/Connecting and Commissioning of 16 Sq.mm 2-core XLPE/PVC insulated and un-armoured 1.1 KV graded Aluminium Cable of Havells/Polycab/Eq Make with required size of thimbles duly crimped with Hydraulic crimping tool including providing and fixing of saddlers/clips with making of connection and partially to be laid underground through DWC High Density Polyethylene Pipe having corrugation on outer wall and plain surface inner wall conforming to IS:14930 Part-I and 2 complete with accessories for protection of 1.1 KV grade underground cable directly in ground at a depth of 50 CM including excavation and refilling the trench. (Material to be approved before execution) with carraige. |
| 75 | Supply/Testing/Commissioning of 15 W LED Conceal (Commercial) luminaryhy fitting with round shape with minimum system luminal efficacy of 100 lm/W with pressure die cast aluminum heat sink with carraige. 9.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender