Public Administrative Department Government Departments Closing in 6 days TDR #56524082

Tender For General-Kannur Municipal Corporation - Septage Treatment Plant At Chelora - Providing Apfc Panel. -Project No. Mkc-Note-30/26 (1-B)-General Electrical Work

Issued by Government Departments · Kannur, Kerala
Tender Value
1.16 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
6 days left
EMD
2909
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for General-Kannur Municipal Corporation - Septage Treatment Plant At Chelora - Providing Apfc Panel. -Project No. Mkc-Note-30/26 (1-B)-General Electrical Work

BOQ

Name of Work:- GENERAL-Kannur Municipal Corporation - Septage Treatment Plant at Chelora - Providing APFC panel. -Project No. MKC-Note-30/26 (1-B)-General Electrical Work
Sl. No. Item Description
1Panel Boards
290.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)
390.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.
490.14.3.2:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardU' section rubber beeding suitable for 1.60/ 2.00 mm sheet
590.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
690.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.
790.14.7:Supply and providing copper earth bus in the panel board
890.14.10.4:Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL
990.14.11.13:MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A
102.1.1:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N
1190.14.24.1:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.1 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.
1290.14.24.67:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.
1390.14.24.68:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.
1490.14.24.71:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.10KVAr, 3 phase, 520 V, Metalised Poly Propylene Heavy duty, Box type resin filled Capacitor suitable for APFC panel with block reactor.
15OD76717/2026-2027:Supply and Providing LED indicators for all voltage ranges - Red, Green, Black, Yellow orOrange Colour
16OD76724/2026-2027:Supplying and providing Cable alley, 100 x 40 mm aluminium anodised legend plates
17OD76726/2026-2027:Supplying and providing Bus bar chamber, 100 x 40 mm aluminium anodised legend plates
18OD76715/2026-2027:Supplying and providing Danger 415 V, 200 x 150 mm aluminium anodised legend plates
19OD76712/2026-2027:Supply conveyance installation of 8 stage,or nearest suitable stage size 440/ 110 V, 5 A/ 1 A intelligent power factor controller.
20OD76713/2026-2027:Supply conveyance installation of Illuminated Flush head Actuator - Red with legend 'OFF', (Contact - 1 NC)
21OD76714/2026-2027:Supply conveyance installation of Illuminated Flush head Actuator - Green with legend 'ON', (Contact - 1 NO)
22OD76718/2026-2027:Supply and Providing 150/ 5 A, 5 VA, resin cast metering CT of accuracy class 0.5.
23OD76719/2026-2027:Supply conveyance installation testing and commissioning of Three phase multi-functionmeters to read V, A and F, accuracy class 1
24OD76716/2026-2027:Supply and providing 3 Pole Capacitor duty contactors for switching capacitor banks 7.5 - 10 kVAR with AC Coil,
25OD76722/2026-2027:Three pole capacitor duty contactors for switching capacitor banks of 4 to 7 KVAr rating with AC coil and 1 NO contact.
26OD76730/2026-2027:Supply, conveyance, installation, testing and commissioning of 100/150 mm single phase,light duty exhaust fan in plastic body in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS
27OD76727/2026-2027:Supply and providing 5A toggle switch and giving connection as required
2890.12.7.28:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp
299.1.21:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
3090.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
3190.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
3290.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
33OD76711/2026-2027:Supply and providing 2 mm thick & 1 m wide electrical grade chequered type insulation mat to withstand 3.3 KV dielectric strength conforming to IS 15652/06
34OD76728/2026-2027:Supply and installation of ABC type fire extinguisher of 6 kg. Capacity complete with initial charges and installation brackets, with ISI mark IS:15222. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56524082
AUTHORITY Government Departments
TENDER VALUE 1.16 Lakhs
LAST DATE 24-07-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for General-Kannur Municipal Corporation - Septage Treatment Plant At Chelora - Providing Apfc Panel. -Project No. Mkc-Note-30/26 (1-B)-General Electrical Work
Basic Detail
Tender No E7-DB/TN-02(4-A)/2026-27 Dated 17.07.2026
Bidding Type Tender
Location
City Kannur
State Kerala
Key Dates
Publish Date 17 Jul 2026
Submission Date 24 Jul 2026
Open Date 27 Jul 2026
Finance
Tender Value 1.16 Lakhs
Tender Fee 555
EMD 2909
Exemption Available
Document List
0817692f-839d-45e6-a8b6-fbd139ac1d31.html
BOQ_1456382.xls
Tendernotice_1.pdf
viewnitpanel.pdf
viewsbdpanel.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Jul 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

0817692f-839d-45e6-a8b6-fbd139ac1d31.html

xls

BOQ_1456382.xls

pdf

Tendernotice_1.pdf

pdf

viewnitpanel.pdf

pdf

viewsbdpanel.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders