Tender For Work Of Fixing Interlocking Tiles In Area In Front Of Sldc Complex Administrative Block, Parking Area And Damaged Dirt Pathway Behind New Power House Colony, Bbmb, At Sldc, Industrial Area Phase -1, Bbmb, Chandigarh
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
10 days left
EMD
19810
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Fixing Interlocking Tiles In Area In Front Of Sldc Complex Administrative Block, Parking Area And Damaged Dirt Pathway Behind New Power House Colony, Bbmb, At Sldc, Industrial Area Phase -1, Bbmb, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Work of fixing interlocking tiles in area in front of SLDC Complex Administrative Block, parking area and damaged dirt pathway behind New Power House Colony, BBMB, at SLDC, Industrial Area Phase -1, BBMB, Chandigarh |
| 2 | Site clearance (b) Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. Ref (32.4 b) L/R |
| 3 | Construction of Embankment with Good Quality Earth obtained from Borrow pits Ref (24.5 a) T/R (a) Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications. |
| 4 | Cement Concrete 1:5:10 with stone aggregate 40mm gauge mixing by manual means (Pb.CSR Ref. No. 10.9)b(i) (T/R) |
| 5 | Providing and laying 60mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design / shape laid in ordinary grey colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per directions of Engineer-in-charge. Ref. No. (14.138) T/R |
| 6 | Cement concrete 1:2:4 with stone ballast or shingle mixing by manual means (Pb.CSR Ref. no. 10.13 (i) (T/R) |
| 7 | Precast Cement Concrete Kerb Ref (24.41 a) T/R(a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 8 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface Ref (16.31) T/R |
| 9 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Ref (16.17) T/R |
| 10 | Dismantling of Flexible Pavements (By Mechanical Means) Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT & H specifications |
| 11 | Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours |
| 12 | Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles,15cm thick C.C 1:6:12 in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick leftabsolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.74) complete and to the requirement of the 29.63 (A) a T/R size 610 x 457X800mm |
| 13 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials andSolvent should be of same make as that of pipes) complete in all respects.29.43 a T/R 110mm old pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender