Tender For Modification Of Washrooms In Dock House Gf (Visitors Toilet & Eastern Side Toilet)
Tender Value
2.49 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
5 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modification Of Washrooms In Dock House Gf (Visitors Toilet & Eastern Side Toilet)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing C.I / PVC pipes (with specials) including excavating and refilling trenches after taking out the pipes, all labour for dismantling and disposal of material within 500 m lead all as directed by the Engineer-in-charge. Up to and including 110 mm dia. |
| 2 | Dismantling the following water supply fittings and transporting the same to the departmental store and stacking the same as directed by the Engineer-in-charge,including the disposal of unserviceable materials to the scrapyards as per the direction of the Engineer-in-charge. |
| 3 | All valves up to 65mm, stop cocks and taps, shower |
| 4 | Wash basins, kitchen sink , EWC, IWC, flushing cisterns |
| 5 | Dismantling tile work in floors/ wall laid in cement mortar manually /mechanically including disposal of material within 2.5 km lead outside CSL as per direction of Engineer-in-charge. |
| 6 | Providing and laying water proofing treatment in bathroom / toilet etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofingcement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry. |
| 7 | Supplying and laying glossy/matt finished vitrified wall tiles not less than 1200 x 600mm size of premium quality of approved make, quality and colour for dadoing by pasting with chemical adhesive Cerabond, Myk or equivalent and pointing the joints of 3mm width,using epoxy grout, filling/grouting, finishing, cost and conveyance of all materials, labour other incidentals etc. as per the direction of Engineer-in-charge (Base rate of tile is 700/m2) |
| 8 | Supplying and laying Fully vitrified premium quality floor tiles (mat finish) of size not less than 600x600mm (Johnson / Khajaria / RAK) of approved quality, brand, colour and size by Engineer-in-charge, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile is 700/m2) |
| 9 | Providing and fixing in position wash basin counter using with 18mm WPC and counter top finished with 6mm Acrylic/solid top (Corian stone /Merino) and fixing with MS angle support with approved materials, cost and conveyance of materials, labour, tools etc. complete. |
| 10 | Providing and fixing Concealed work of uPVC pipes of following diameter, including all uPVC plain & brass threaded fittings, cutting chases and making good the walls etc. This includes the cost of jointing of pipes & fittings with one step UPVC solvent cement and the cost of cutting chases and making good the same complete as specified and directed by Engineer in Charge. |
| 11 | 25 mm - 15 Kgf |
| 12 | 32 mm - 15 Kgf |
| 13 | Providing and fixing Table top wash basin of size 460x400x140mm with AC sensor faucet and 32mm SS pop up type waste coupling including cost and conveyance of all materials for fixing, other incidentals, all labour for connecting outlet lines etc. complete. |
| 14 | Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have \\"stab\\" installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edged Calcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc.. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete. |
| 15 | Supplying and fixing wall hung water closet with flush tank light colour (Jaguar/Cera) approved by the Engineer-in-charge with all fittings, including cutting, opening and making good the damages, cost and conveyance of all materials for fixing, other incidentals, all labour for connecting outlet lines etc. complete. |
| 16 | Providing and fixing following water supply and sanitary fittings of approved quality including cost and conveyance of all materials, labour, other incidentals etc. complete. |
| 17 | SS towel rail of size 600 mm long |
| 18 | Health faucet with SS hose pipe and hook |
| 19 | CP angle cock |
| 20 | CP Brass (best quality, heavy) long body tap |
| 21 | 100mm SS gratings |
| 22 | PVC multitrap of size 110mm |
| 23 | PVC line trap of size 63mm |
| 24 | Painting on walls with two coat of interior emulsion paint of premium quality and colour over one coat cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete.(Without putty) |
| 25 | Providing and constructing 30x20x15 cm solid concrete block masonry in CM 1:5 in walls, using best quality solid concrete blocks including cost & conveyance of all materials, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete including the cost of cement as directed by the Engineer - in - charge. |
| 26 | Plastering with C.M 1:4, 12mm thk for floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge including cost of cement. |
| 27 | Demolishing R.C.C / P.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within CSL premises as per direction of Engineer-in- Charge, including all labour, other incidentals, hire for tools and plants etc. complete. |
| 28 | Supplying, cutting, threading, laying and jointing rigid PVC pipes including all specials such as tees, bends, elbows, reducers, plugs etc. through walls/ concrete, making good the wall/ concrete after fixing using CM 1:3, taking connection from the existing water supply including cost and conveyance of all materials, labour, testing the line before embedding etc. complete. |
| 29 | 25mm dia (10kg/cm2) |
| 30 | 32mm dia (10kg/cm2) |
| 31 | 63mm dia (6kg/cm2) |
| 32 | 110mm dia - (6kg/cm2) |
| 33 | Dismantling and removing doors, windows, ventilator including removal of shutters, hinges, holdfasts and all other fittings and stacking materials within CSL premises etc complete. |
| 34 | Making the opening in brick masonry including dismantling in walls by cutting masonry and making good the damages to walls to match existing surface including disposal of the debris within CSL premises, all complete as per direction of Engineer-in-Charge. |
| 35 | Providing and fixing in position fixed type mosquito proof ventilator/Exhaust opening using powder coated Aluminium frames of approved quality and shade using 25 x 25 x 1mm size or nearest available sections and stainless steel net, EPDM beading, locking arrangement, screws, nail etc including cost and conveyance of all materials all labour etc.complete as directed by the Engineer in charge. |
| 36 | Providing and laying plain cement concrete 1:3:6 using 20mm down graded broken stones including cost and conveyance of all materials ,labour for mixing, laying, consolidating curing etc.complete including cost of cement. |
| 37 | Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwich panel. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, 150mm SS aldrop 1nos, 125mm aluminium handle 2 nos, with necessary screws and grips including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc. complete. |
| 38 | Providing and fixing in position openable type mosquito proof Door/ Window/Ventilator using 25.12 x 13.39 mm or higher size powder coated aluminium section for shutter, two intermediate 20.30 x 10.27 mm or higher size horizontal aluminium member for shutter and stainless steel net 316 grade, EPDM beading, Aluminium hinges , PVC latches, screws, nails, Applying matching colour silicon sealant for joints of wall and aluminium frame etc. including cost and conveyance of all materials, all labour, fixtures etc. complete . |
| 39 | Providing & fixing in position manually operated Roller Blinds of approved shade and colour with good quality fabric including cost and conveyance of all materials all labour, other incidentals etc. complete. |
| 40 | Supplying and fixing urinal partition using 12mm thk HPL board of size 400x900mm and fixing with SS screws other incidentals, all labour for connecting outlet lines etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender