Tender For Beautification Work In Nagar Panchayat Office Complex Purdilnagar.
Tender Value
25.48 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
8 days left
EMD
2.54 Lakhs
Bank guarantee accepted
Document Fee
3068
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Work In Nagar Panchayat Office Complex Purdilnagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in walls, floors and roofs laid in cement mortar including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). Sor 21 new |
| 2 | Scrapping old white or colour wash includingdisposal of refuse as directed by Engineer-Inchargewithin a distance of 60 meters (200 feet) Sor 708 |
| 3 | Dismantling existing plaster including disposal ofrefuse as directed by Engineer-In-Charge within adistance of 60 meters. Pwd si no. 706 |
| 4 | Dismantling doors and windows Sor 705 |
| 5 | Providing and laying cement concrete in 1:4:8 (1cement , 4C/sand 8 s/ballast in 40mm) and curing complete i/c cost of form work in foundation and floor as per PWD s.i.no.275a ch-5 |
| 6 | Providing and fixing in pvc wall panneling and ceiling work i/c supply of all material and labour with installation complete |
| 7 | 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) in 1:3 cement, c/sand pwd si no. 583 |
| 8 | Wall painting (Two coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of dirt, grease loose pieces and prepare smooth surface including cost of all material, Labour, T&P etc. complete required for proper completion of the work si no.17+18 |
| 9 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete i/c cost of all material, labour T&P etc complete required for proper completion of the work as per DSR no.13.80 ch-15 |
| 10 | Providing and laying vitrified floor tiles etc., complete. DSR no.11.41.4 ii |
| 11 | Kota stone slab flooring over 20 mm (average) thickbase laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab,including rubbing and polishing complete with baseof cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick DSR no.11.26.1 |
| 12 | S/F 6mm thick china white glazed tile on wall laid with 1:3 cement c/sand i/c all complete as per PWD s.i. no.628ch-14 |
| 13 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up as si no.21.1.2.2 DOOR |
| 14 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per sa si no.11 new iiI 8.0 mm thick |
| 15 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. as per sa si no.9.83 |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required all as per s.i.no. 2ch-24 |
| 17 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore as DSR no. 18.49.1 |
| 18 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: as DSR no. 17.7.4 d ch 22 |
| 19 | PVC connection pipe 450 mm long 15 mm dia as per s.i no.138 ch-21 |
| 20 | CP brass waste jali as per s.i no.136b ch-21 |
| 21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as DSR no. 18.53.1 |
| 22 | P/F CPVC pipes having thermal stability for hot & cold water supply I/C jointing of pipe and cutting chases and making good as per s.i.no.8b ch-23 |
| 23 | P/F CPVC pipes having thermal stability for hot & cold water supply as per s.i.no.8 C ch-23 Internal work |
| 24 | Brass ball cock complete with ball and rod as per s.i no.128 ch-21 |
| 25 | P/f of Wiring point with 1.5 sq mm FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 14 swg copper earth continuity wire GP box, piano type switch and ceiling rose holder on and earthing point Light/fan/exhaust point as item. 1.8.3 group c |
| 26 | Wiring for light/power plug with FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 4sq. earth continuity wire requireda. 2×4sq.mm as code no.1.12 |
| 27 | Wiring for light/power plug with FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit with 4sq. earth continuity wire requiredb. 2×6sq.mm as code no.1.14.4 |
| 28 | LED square light |
| 29 | Supply and fixing of mcb distibution board as code no.2.4.2 |
| 30 | Supply and fixing of 5 to 32 Amp MCB (10kA) CAT A as code no. 2.10.1 |
| 31 | 16 amp switch as code no. 1.23.3 |
| 32 | 6 pin 16 amp socket as code no. 1.23.5 |
| 33 | S/M aluminium lugs as code no. 9.1.1 |
| 34 | Wall Mount Split AC |
| 35 | Stablizer for Split AC |
| 36 | Chair with desk |
| 37 | Chair for member & staff |
| 38 | P/F polyster curtain i/c all |
| 39 | Buzzer |
| 40 | P/F signboard of black granite plate in Brick masonary in Cement mortar i/c all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender