Tender For Restoration Of Rain Damages Of Lwss Karohta In Tehsil. Bhoranj, Distt. Hamirpur Hp (Sh: Repair Of Pump House Of Lwss Karohta).
Tender Value
3.36 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
3 days left
EMD
6721
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Lwss Karohta In Tehsil. Bhoranj, Distt. Hamirpur Hp (Sh: Repair Of Pump House Of Lwss Karohta).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, jumper blast,blasting soft / hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer- in- charge clear from the edge of excavation and then returning the stacked soil in 15 cm layer when required into plinth and side of foundation etc. Consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth by the Engineer- in- chargeup in all leads and lift.PJ50% each |
| 2 | Providing and laying cement concrete 1:6:12 (1 cement :6 sand :12 graded stone agg. 40mm nominal size) On curing complete excluding cost of form work in foundation and plinth in all lead and lifts . |
| 3 | Providing and laying cement concrete work 1:2:4 (1 Cement: 2 sand :4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 4 | Suspended floor roofs, landing & shelves & their support balconies, beams, girders, bressumers & canilever upto floor level in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 5 | Brick work using common burnt clay building bricks in super structure in cement mortar 1:6(1cement:6 sand) 2nd class brick complete all leads and lifts to the entire satisfaction of Engineer-in-charge. |
| 6 | Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood in all leads and lifts. |
| 7 | Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts. (2nd class Deodar wood) |
| 8 | Prov. & fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia. 0.56 mm for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws. |
| 9 | Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 10 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 11 | Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 12 | White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts. |
| 13 | 20 mm thick cement plaster for single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises internal rounded angles chamfers or rounded angles not exeeding 80mm in girth and fixed even smooth in 1:6 (1: cement : 6 sand) within all leads and lifts |
| 14 | 6mm cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) in all leads and lifts. |
| 15 | Providing mild or tor steel reinforcement for RCC Work including bending binding and placing in position complete upto floor two level Tor steel complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 16 | Applying priming coat over new wood & wood based surface after & including preparing the surface by thoroughly cleaning oil,grease,dirt & other foreign matter sand papering & knotting ready mixed paint brushing with wood primer pink in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 17 | Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter :--with enamel paint other than white in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 18 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces ( two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 19 | Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. |
| 20 | Providing 40X3 mm flat iron hold fast 40cm long inluding fixing to frame with 10mm dial meters bolt and nuts and wooden plug and embending in cement mortar block 30x10x15cm (1:3:6 (1 cement :3 sand :6 graded stone aggregate 20mm nominal size complete in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 21 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete |
| 22 | Sliding door bolts 250x16mm. |
| 23 | M.S. tower bolts (Barrel type) leads and lifts. 200x10mm. |
| 24 | M.S. tower bolts (Barrel type) leads and lifts. 100x10mm. |
| 25 | M.S. handles 125 mm dia |
| 26 | Providing and fixing of MS round bars in windows and ventilators. |
| 27 | Stone / Boulder filling under foors / behind retaining walls. |
| 28 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1Cement :3 sand :6 stone aggregate 20mm nominal size) in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender