Tender For Construction Of Reinforced Cement Concrete Covered Drain & Improvement Of Road Shoulder In annual maintenance contract Area (Sasci 2025-26) /S.H:-Construction Of Reinforced Cement Concrete Covered Drain, Paver Block & Brick Masonry Drain F
Tender Value
60.33 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
0 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Reinforced Cement Concrete Covered Drain & Improvement Of Road Shoulder In annual maintenance contract Area (Sasci 2025-26) /S.H:-Construction Of Reinforced Cement Concrete Covered Drain, Paver Block & Brick Masonry Drain From Head Of Swapan Saha To Head Of Dilip Kumar Via Head Of Binoy Paul To Head Of Ajit Debnath At Shil Tilla Under Ward No-43
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for StructuresB. With dewatering.Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.I. Ordinary soil |
| 2 | (i) Upto 3 m depth |
| 3 | Dismantling of structures Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding whenever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and upto a lead of 1000 m as per MoRD Technical Specification Clause 202.(I) By Manual Means |
| 4 | B)Cement Concrete |
| 5 | Dismantling Brick/Tile Work as per MoRD Technical Specification No. 202.Dismantling of existing structures like culverts, bridges,retaining walls and other structures comprising of brick masonry including disposal of unserviceable material and stacking the serviceable material with all lift and upto a lead of 1000 m as per MoRD Technical Specification Clause 202. |
| 6 | In cement mortar |
| 7 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200. |
| 8 | Sand Filling |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.-All kinds of soil |
| 10 | Carriage of materials (excavated earth) by mechanical transport in/c loading,unloadind and staking lead up to 5km. |
| 11 | 80 mm thick factory made c.c. interlocking paver block of M-35 GradeProviding and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer-in-Charge: |
| 12 | (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern. |
| 13 | Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). |
| 14 | I.PCC M 10 Grade(i) Nominal mix 1:3:6 |
| 15 | III.PCC M 20 Grade(i) Nominal mix (1:2:4) |
| 16 | V. R.C.C grade M 25 |
| 17 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRT&H technical specification Clauses 1600. |
| 18 | Brick solingii) Flat Brick soling |
| 19 | Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412. |
| 20 | Brick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing &MoRT&H technical specifications Clauses 1300. |
| 21 | iii)Brick masonry in 1:4 cement mortar |
| 22 | Plastering with cement mortar (1:4) 12 mm thick onbrickwork/ C.C. work including a finishing coat of neatcement punning with 2.75 kg of cement per sqm insubstructure as per MoRD technical specification Clauses 613.4 & 1204. |
| 23 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRT&H technical specification clauses 2706, 2200. |
| 24 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 25 | Painting on Steel SurfacesProviding and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRD Technical Specification Clause 1701 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender