Tender For Providing Electrical Points For Electric Bulk Cooker In Apc Kitchen, Pgimer, Chandigarh.
Tender Value
3.24 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
6 days left
EMD
6480
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Electrical Points For Electric Bulk Cooker In Apc Kitchen, Pgimer, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 2 | 4 way (4 + 12), Double door |
| 3 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 4 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 5 | Above 35 sq. mm and upto 95 sq. mm |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 7 | 4 X 10 sq. mm (25mm) |
| 8 | 4 X 25 sq. mm (28mm) |
| 9 | 3½ X 50 sq. mm (35mm) |
| 10 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning |
| 11 | Double pole |
| 12 | Triple pole and neutral |
| 13 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthingetc. as required. (But without MCB/RCCB/Isolator) |
| 14 | 6/4 way , Double door |
| 15 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 16 | Supplying of following size and core of Aluminum Conductor Balance Stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Armoured, Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. |
| 17 | 6 sq.mm, 4 core |
| 18 | 25 sq.mm, 3.5 core |
| 19 | 50 sq.mm, 3.5 core |
| 20 | Supplying of following size and core of Copper Conductor cable stranded, bright annealed copper conductors, PVC insulation , and a robust outer sheath, complying with IS 694, rated for 1100V, offering high flexibility and conductivity, suitable for industrial machines and panels. |
| 21 | 10 sq.mm, 3- core, armoured |
| 22 | Supplying and fixing following pole and rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 23 | 63 A Triple pole |
| 24 | Supply and fixing of 4 pole TPN Enclosure of sheet steel, dust protected, duly powder painted, suitable for wall mounting. |
| 25 | Providing and fixing following rating and breaking capacity and pole MCCB with Microprocessor based LSING release, Ics=100%Icu and terminal spreaders (if Required) in existing cubicle panel board including drilling holes in cubicle panel, making connections, Operational Voltage 690V etc. as required. |
| 26 | 100A 4 pole |
| 27 | Supplying and fixing of junction box with one no. incoming side cable connections of 25sq mm and 12 nos. outgong side cable connections of 6 Sq mm. The Body should be treated Through chemical treatment with 7 tank process Method for degreasing, Derusting and Phosphating Powder coating shall be 60-80 microns. The Busbar should be capable of carrying 200A Current. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender