Tender For Establishment Of Trout Rearing Unit At Shartpalla Tangdar
Tender Value
68.62 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
7 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Trout Rearing Unit At Shartpalla Tangdar
BOQ
| Sl. No. | Item Description |
| 1 | Building: Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres in all kinds of soil, complete job.Plateform Cutting incl dressing of ground to required gradient |
| 2 | Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40 mm nominal size), complete job. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size), complete job. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete, with Hot rolled deformed bars |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 9 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 10 | Dry random rubble masonry with hard stone in foundation and plinth With bond stone, incl all carriages complete job. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
| 16 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 17 | Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screwsn in First class kail wood. |
| 18 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge in First class kail wood |
| 19 | P/F Of4mmglass Panes With Beeding Incl. C/O Nails Complete. |
| 20 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work, complete job. |
| 22 | 12mm thick Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand), complete job. |
| 23 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete job. |
| 26 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 27 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 28 | Providing and laying Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete |
| 29 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size stone aggregate. |
| 30 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, Raj Nagar plain white marble/Udaipur green marble/zebra black marble SOR 8.2.1.2 |
| 31 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 500x500 mm |
| 32 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 33 | Providing and fixing of tile profile colour coated CGI sheets of 0.63mm thickness inc the cost of nuts and bolts and all other accessories for fixing, carriage from source to the site of work, complete job. |
| 34 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 35 | Providing and fixing of Eaves Boarding of size 25x300mm of Ist Class Kail Wood incl. all fittings and fixtures complete job. |
| 36 | P/F Panelling to soffit including framework and all the fittings and fixtures, complete job. |
| 37 | Filling GSB/Sand in Plinth etc in layers not exceeding 20cm in depth, consolidating each layer by ramming, watering complete job. |
| 38 | Providing And Fixing Of Gi Pipes Completed With G.I. Fittings And Clamps Including Cutting And Making Good The Walls Etc Internal work 20mm Nominal Bore Medium |
| 39 | 15mm Nominal Bore Medium |
| 40 | Providing And Fixing Of Pvc Pipes Including Cutting Making Good The walls Back 100 mm Dia |
| 41 | Providing And Fixing Of Pvc Pipes Including Cutting Making Good The walls Back 75 mm Dia |
| 42 | P/F of mainholes of required size as per the directions of Engineer in charge, complete job. |
| 43 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 44 | Supply & Fixing Of Wall Mixer of approved brand and make and as per the directions of engineer in charge. |
| 45 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040mm bowl depth 178mm |
| 46 | Supply & Fixing Of Sink Mixer of approved brand and make and as per the directions of engineer in charge. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Surgeon type wash basin size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers. |
| 48 | Supply & Fixing Of Basin Mixer of approved brand and make and as per the directions of engineer in charge. |
| 49 | Supply & Fixing Of Geyser Of 50 Liter Capacity of approved brand and make and as per the directions of engineer in charge, complete job. |
| 50 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 51 | Supply & Fixing Of PVC Connections of approved brand and make and as per the directions of engineer in charge. |
| 52 | Supply & Fixing Of Angle Valve of approved brand and make and as per the directions of engineer in charge. |
| 53 | Supply & Fixing Of Looking Mirror of approved brand and make and as per the directions of engineer in charge. SOR 18.32.1 |
| 54 | Supply & Fixing Of Soap Case of approved brand and make and as per the directions of engineer in charge. |
| 55 | Supply & Fixing Of Toughened Glass Shelf of approved brand and make and as per the directions of engineer in charge. |
| 56 | Supply & Fixing Of Towel Rod of approved brand and make and as per the directions of engineer in charge. |
| 57 | Providing And Fixing Of Gunmetal Gate Value With C.I.Wheel Of Approved Quality(Screwed) I. 20mm Nominal Bore |
| 58 | Supply & Fixing Of Float Valve of approved brand and make and as per the directions of engineer in charge. |
| 59 | Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi:12701 Marked Indicating The Bis License No. With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fitting And The Base Support For Tank ( Sintex , Electroplast , Star , Lotus Or Equivalent Having Valid Isi License)Incl. all Cost And Carriages Upto Site Of Work Complete. |
| 60 | P/F Of Electric Lighting Points Incl. all fittings and fixtures and all the allied accessories, complete job. |
| 61 | P/F Of Electric Heating Points Incl. All Materials Complete. |
| 62 | P/F Of Electric Fan Points Incl. All Materials Complete. |
| 63 | Providing & Fixing Of Exhaust Fan Including All Fittings & Fixtures Complete Job |
| 64 | P/F of main Board incl wiring switches and other allied items of approved quality as per the directions of engineer in charge, complete job. |
| 65 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 66 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) |
| 67 | Carriage Bricks fro budgam Sgr Avg Lead 200 Km |
| 68 | Sand/Agg 10 kms |
| 69 | Trout Rearing Unit :- Earth work in bulk excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in All kinds of Soil |
| 70 | Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. |
| 71 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40 mm nominal size), complete job. |
| 72 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 73 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelTMT Bars |
| 74 | Centering and shuttering including strutting, propping etc. and removal of form work for: foundation footings basis of columns. |
| 75 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate |
| 76 | 12mm Cement plaster mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 77 | Providing and fixing of plastic /pvc pipes as per directions of Engineer in charge cj 75 mm/100 mm whatever required at site |
| 78 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all carraiges etc complete job. |
| 79 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 80 | carriage of sand/bajree MT 10 kms |
| 81 | Fencing: Earth work in excavation for all kinds of soil, by manual / mechanical means in trenches for foundation, drains, pipes, cables, etc.: not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan, including disposal of excavated earth up to a lead as directed by site engineer in charge, disposed soil to be levelled and neatly dressed including setting out. |
| 82 | Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. |
| 83 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 84 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 85 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge, made of G.I. wire of dia 4 mm. |
| 86 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 87 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work. |
| 88 | Carriage of materials from source to site of work by MT Sand/bajri for an average lead of 15 Km |
| 89 | Gate : Earth work in excavation for all kinds of soil, by manual / mechanical means in trenches for foundation, drains, pipes, cables, etc.: not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan, including disposal of excavated earth up to a lead as directed by site engineer in charge,disposed soil to be levelled and neatly |
| 90 | Providing and laying of soling stone size on level (hand packed) watering ramming complete below Foundation& rooms including carriage with cost and carriage complete. |
| 91 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement: 4coarse sand: 8 graded stone aggregate 40 mm nominal size), complete job. |
| 92 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement for foundation in 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size), including all carriages complete job. |
| 93 | Providing and fixing Reinforcement for RC work incl. straightening cutting binding placing in position and binding all complete hot rolled deformed bars @90 KG Per CUM of quantity vide item No. 04. |
| 94 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns et,complete job. |
| 95 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 96 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work. |
| 97 | Carriage of materials from source to site of work by MT Sand/bajri for an average leadof 10Km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender