Tender For Upgradation Of Flooring In Vacant House D-17.
Tender Value
2.29 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
14 days left
EMD
4600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Flooring In Vacant House D-17.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade, laid on 20 mm thic cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Tile 600 x 600 mm. |
| 2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | Providing and fixing overhead kitchen cabinet overall size 1.80x0.75x0.40 mm deep on top and 0.25m deep on bottom (or part thereof). The cabinet is to be fixed with two intermediate partitions. Upper part of the cabinet will be fixed with six no. shutters (0.50m high ). The shutters are to be fixed with 100 mm S.S. handles & spring hinges of approved quality. All exposed edges of the board shall be epoxy painted in matching colour of board. The cabinet is to be made out of prelaminated board, exterior grade ISI marked conforming to IS 14587, with choice lamination on both sides. The cabinet is to be fixed on wall with 100mm M.S. fasteners complete as per design & drg. Front area of cabinet with total height i/c area without shutter shall be measured for payment. |
| 5 | Providing and fixing kitchen cabinet under cooking platform with overall size 1.60x0.65x0.55 with two intermediate vertical partitions to divide cabinets into three equal parts. Each part will be provided with side hung shutters & an inermediate horizontal partition (folding/removable type 0.30m deep). Each shutter will be fixed with two nos. spring hinges & 100 mm S.S. handle of approved make & desing. The cabinet is to be made out of ISI marked conforming to IS 14587 18 mm MDF prelaminated board, exterior grade with choice lamination on sides except on back which shall be 8 mm thick & choice lamination on one side. All exposed edges of the board shall be deco/epoxy painted. The shutter area shall be measured for payment. |
| 6 | Supplying & fixing Single Phase, 230 volts, 1400 RPM, Metal body exhaust fan / ventilating fan , size 225 mm sweep complete as required. (Make: Bajaj/ Havells/ Crompton). |
| 7 | Supplying & fixing Single Phase, 230 volts, size 200 MM, Plastic body exhaust fan / ventilating fan complete as required. (Make: Bajaj/ Havells/ Crompton). |
| 8 | Brush Less Direct Current (BLDC) Fan with Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body.Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance asper IS : 374-2019), THD (Total Harmonic Distortion)less than 10%, remote (preferably mobile app based)for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender