Tender For maintenance of Completed Scheme Under Nazul A/C-Ii Horticulture Zone.Sub-Head Fencing Of Plantation Area With Barbed Wire And Angle Post Under Aranyapolicy2026 In Parks Under The Jurisdiction Of Sd-I/Hcd-6.1. Dist. Park Avantika, Rohini, S
Tender Value
21.28 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
0 days left
EMD
42572
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Completed Scheme Under Nazul A/C-Ii Horticulture Zone.Sub-Head Fencing Of Plantation Area With Barbed Wire And Angle Post Under Aranyapolicy2026 In Parks Under The Jurisdiction Of Sd-I/Hcd-6.1. Dist. Park Avantika, Rohini, Sector-1.2. Parks & Water Body Rithala, Sector-5, Rohini.3. Play Field Sec.8 Rohini Between E-17 & F-18.4. Nhp Near Remal Public School, Sector 3, Rohini.5. Green Belt, Sector-8, Rohini, Pkt B5. 6.Green Belt, Sector-8, Rohini, Pkt A1 7.Nhp & Play Area, H-32, Sector-3, Rohini 8.Nhp Sports Field, Sector-8, D-11, Rohini.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed withing a lead of 50 m and lift upto 1.5m.All kinds of soil. |
| 2 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 3 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between thetwo posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Costof posts, struts, earth work and concrete work to be paid for separately).Payment to be made per metre cost of total length of barbed wire used.16.18.1 With G.I. barbed wire |
| 8 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 9 | Manufacturing, supplying and fixing retro reflective small signage boards made up of 4 mm thick ACP sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). a) Small signage board. |
| 10 | Brick edging in full brick width and half brick depth including excavation,refilling and disposal of surplus earth lead upto 50 metres. (a) With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 11 | Total ₹2,123,957.65 |
| 12 | GST modification Factor @0.973 ₹2,066,610.79 |
| 13 | Add cost index @ 3% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender