Tender For Special Repair To Dg Sets For Water Supply Installations (Against Ber) And Allied Works At Sector B & Special Repair To Chemical Dosing System For Syl Filtration Plant Under Ge (U) Ambala Cantt.
Tender Value
33.99 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
9 days left
EMD
67980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Dg Sets For Water Supply Installations (Against Ber) And Allied Works At Sector B & Special Repair To Chemical Dosing System For Syl Filtration Plant Under Ge (U) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning silent diesel Engine driven generating set, fully wired alternator AC to give an output of 125 KVA/ 100 KW continuously rating at a PF of 0.8 lagging, 415 Volts AC 3 phase 4 wire 50 Hz +/-1% supply, 1500 RPM, directly coupled with diesel engine specification complying BS 5514, ISO 3046, IS 1460, ISO 9001, ISO 8528 & IS 13018. DG Set shall be water cooled mounted on Channel section iron common base frame with AC Alternator complete with fuel tank provided within canopy on base frame (Service tank) of adequate capacity with fuel line and accessories, including PCC /RCC foundation work as per manufacturer instructions, vibration and damper pads (AVM), control panel with necessary meter and sound proof canopy as per CPCB-IV norms and other accessories etc comprising of the following:- |
| 2 | (I) Engine :- (a) Diesel driven 4 cylinder, in-line 4 stroke, radiator cooled with blower fan engine and fully controlled by Electronic Engine control module.(b) Air handling system with dry type, Replaceable paper element air cleaner with restriction indicator & Air to air aftercooler(c) Turbocharger, electrical lift pump for faster response(d) Fuel injection pump system with electronic governing(e) Dual fuel filter system: Pre & main filter including water separator and Water in Fuel sensor.(f) Integral set-mounted radiator system, designed for 50°C ambient temperature (g) Full flow spin on lube oil filter with plate type lube oil cooler.(h) 1 No of 12 V, 105 AH DC lead acid batteries having 4 year warranty with terminals and spare cables. (j) Electrical starter motor with soft start engagement feature (k) Bty charging alternator , 12 V DC Self starter, Fuel pipe C Class STIC of suitable size.(l) Emergency stop button |
| 3 | (II) Alternator :-(a) Brushless Excitation type, Screen protected, Revolving field, Self excited alternator conforming to IS4722, IS 13364 Suitable rated at 0.8 PF, 415 V- 440 V, 3 Phase, 4 wire 50 Hz, at 1500 RPM, self excited and self regulated with AVR, screen protected, drip proof, suitable Insulation class, self ventilated for engine as mentioned here in before.(b) 3 Phase reconnectable copper winding with terminals brought out for connection (c) Sealed bearings for alternator (d) Having IP 23 Enclosure, H Class of insulation, voltage regulation ±1% (e) unbalance load capability :- 25 % of rated current. |
| 4 | (III) DG Control Panel :-(a) Control panel is made up of 14/16 gauge CRCA sheet and is powder coated for weather-proof consists of the following parts :-(b) Micro processor based DG Controller module system to set monitoring, metering and control system with LCD display such as the following parameters:- Control System : Digital AVR, Digital electronic governing & Remote start-stop Engine metering: Oil pressure, Coolant temperature, Battery voltage, Engine speed Alternator metering : Line to Line Voltage and Line to Neutral Voltage, Current (single and 3 phase), Volt-Amperes (phase and total) and Frequency. (c) Aluminum bus bars with suitable capacity with incoming/ outgoing terminals (d) Indicating lamps for ‘Load ON’ and ‘Set Running’ . (e) Instrument fuses duly wired and ferruled .(f) MCCB of suitable rating with overload and short circuit protections. (g) CT of suitable ratio-03 Nos (h) One set of instruments MCBs |
| 5 | Engine protection: Low lube oil pressure, High/Low coolant temperature, Over speed, Bty Over/Under/Weak Volts, Fail to crank/ start, Sensor failure. AC Alternator protection : Over/Under voltage, Over/ Under frequency, Over current, Short circuit and Loss of AC sensing. Data logging: Engine hours, Control hours, Engine starts and upto 10 recent fault codes, 12 /24 Volt DC operation Sleep mode. |
| 6 | (IV) Silencer :-Silencer suitably optimized to meet stringent noise emission standards laid down by MoEF / CPCB(IV) as per latest global pollution standard. Mounting Arrangement and Fuel tank :- Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Base frame with integral fuel tank having storage capacity not less than 8 hrs factory made HR/MS Sheet of suitable thickness is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning. |
| 7 | (V) Accoustic Enclosure :-(i) Designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1 Mtr at 75% load under free field conditions. (ii) The acoustic enclosure is made of CRCA sheets as per OEM shade and a structural/ sheet metal base frame painted in black. (iii) High quality noise absorbant and fire-retardant grade acoustic insulation material (PU Foam) complying to IS 8183 (iv) Two point / base lifting for easy handling at site(v) Air inlet louvers designed to operate at rated load (vi) UV resistant powder coating of all parts to withstand extreme environment(vii) Fluid drains for lube oil and fuel (viii) Fuel filling arrangement inside the enclosure (ix) Inside illumination - 01 No - LED fitting of 10 watt Please Enable Macros to View BoQ information |
| 8 | (V) Accoustic Enclosure :-(i) Designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1 Mtr at 75% load under free field conditions. (ii) The acoustic enclosure is made of CRCA sheets as per OEM shade and a structural/ sheet metal base frame painted in black. (iii) High quality noise absorbant and fire-retardant grade acoustic insulation material (PU Foam) complying to IS 8183 (iv) Two point / base lifting for easy handling at site(v) Air inlet louvers designed to operate at rated load (vi) UV resistant powder coating of all parts to withstand extreme environment(vii) Fluid drains for lube oil and fuel (viii) Fuel filling arrangement inside the enclosure (ix) Inside illumination - 01 No - LED fitting of 10 watt Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender