Tender For Welcome Maintenance To Offr Md Accn At Umroi Mil Stn Under Ge Umroi
Tender Value
12.30 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
14 days left
EMD
24600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ri Bhoi → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Offr Md Accn At Umroi Mil Stn Under Ge Umroi
BOQ
| Sl. No. | Item Description |
| 1 | M&L for washing, rubbing down and stopping of distempered and painted surfaces any type of wall including preparation of old surfaces and then applying two coats of oil bound distemper of any tint with 1mm wall care putty where ever required complete all as specified and directed.Note: Wall care putty shall be measured and paid separately. |
| 2 | M&L for preparation of old plastered surfaces of wall and applying a coat of oil bound distemper complete all as specified and directed. |
| 3 | M&L for applying 1mm thick internal wall care putty on wall/ ceiling complete all as specified and directed. |
| 4 | M&L for preparation of old plastered surfaces of ceiling and applying a coat of oil bound distemper complete all as specified and directed. |
| 5 | M&L for preparing old external surfaces of existing treatment by washing, rubbing down and stopping of weather proof paint and painted surfaces of external wall and applying a coat of antifungal paint complete all as specified and directed. |
| 6 | M&L for preparation of old painted wood and wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 7 | Material and labour for coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 350 x 7 mm/450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in cement mortar 1:4 including demolition of existing tiles and cement mortar bedding (but not backing) and removing from site and rubbish of the premisses complete all as specified and directed. |
| 8 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick CM 1:6 screed bed for laying of floor finishes including dismantling of existing tiles and bedding complete all as specified and directed. |
| 9 | M & L for vitrified ceramic tiles 7 to 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floor, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor laid over and including 15mm thick screed bed/bedding layer in cement mortar 1:6 including demolition of existing floor tiles and bedding layers and removing from site and rubbish of the premisses complete all as specified and directed. |
| 10 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store and S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 11 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 20 cm girth in brick walls etc complete all as specified and directed. |
| 12 | M&L for providing and fixing false ceiling of designer tiles of colour as approved by Engr-in-charge (High Pressure steam cured) of 4 mm thickness (as per IS : 14862) of size 595 X 595 mm and any design (cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 grams, both side inclusive and black painted groove on all T webs) consisting of Main T runner with suitably spaced joints to get required length and 15 X 32 mm made from 0.30 mm thick sheet 1200 mm long spaced between main \\"T\\" at 600 mm C/C to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x20x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instruction/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200 mm C/C along main \\"T\\", bottom exposed width of 15 mm of all \\"T\\" sections of 4 mm dia GI wire shall be pre-Painted with polyester paint and black painted groove at centre of Size 4mm depth and 4.5 mm width, including dismantling of existing false ceiling and connected accessories at any heights as per direction by Enge-In-Charge. |
| 13 | S&F in repair wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 14 | S&F in repairs vitrous china wash down water closet pan EWC, white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed. |
| 15 | S&F in repairs 10 litres Capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern & fixing high or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed. |
| 16 | S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 17 | Supply and fix in repair brass chromium plated wall mixer for mixing hot and cold water screwed down to CPVC pipe SDR-11 Pipe of outer dia 20 mm complete all as specified and directed. |
| 18 | S&F in repairs Brass chromium plated shower rose 125mm size, including fixing to steel pipe or union complete all as specified and directed. |
| 19 | S&F in repairs Brass Chromium Plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 20 | S&F in repairs 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 21 | Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white with P or S trap, front or back inlet and integral foot rest ( Excluding flushing cistern and flush pipe) including provision of cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed. |
| 22 | S&F in repairs CP basin mixer for mixing hot & cold water screw down to CPVC pipe SDR-11 pipe of outer dia 20 mm complete all as specified and directed.S & F in repair for 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete. |
| 23 | Supply and fix toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 24 | S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement complete all as specified and directed. |
| 25 | Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 26 | M&L for cement concrete 75 mm thick as in floors type B- 2,1 :2:4 (40mm graded stone aggregate) complete all as specified and directed. |
| 27 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down soil pipe/ rainwater pipes (any size or pattern) and all fittings (heads, shoes, bends, swan-necks,etc.) including cleaning or refixing (measured overall as fixed along the centre line over fitting and accesories) complete all as specified and directed. |
| 28 | S & F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 29 | S & F 110mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed. |
| 30 | S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 31 | Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 32 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding. 4.00 sqm each complete all as specified and directed. |
| 33 | Taking down shutters of any description exceeding 1 sqm but n exc 2 sqm each and removing from site complete all as specified and directed. |
| 34 | S&F Pressed steel frames for doors of frame size 105x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC shall be measured and paid separately. |
| 35 | S&F Pressed steel frames for doors of frame size 125x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC shall be measured and paid separately. |
| 36 | Material & Labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling of pressed steel frame, complete all as specified and as directed. |
| 37 | Material & labour for PCC type B0 1:2:4 (12.5mm graded stone aggregate) for fixing hold fasts, angle, etc including necessary form work complete all as specified and directed. |
| 38 | S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 39 | S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 40 | S&F second class hard wood 35mm glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) and fitted to chowkhats complete all as specified and directed. |
| 41 | Supply and fixed stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage etc, complete all as specified and directed. |
| 42 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. |
| 43 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 44 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick Moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, and fixing in frame at site as per specification and drawings complete all as specified and directed. |
| 45 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 46 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 47 | S&F in repair 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 48 | S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed. |
| 49 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 50 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender