Tender For Special Repair To Officers Md Accn Qtr No 2/3/C,2/3/B,2/4/A,2/4/B,2/2/C At Subhash Marg And 10/1/D At Hm Marg Under Ge East Lucknow
Tender Value
63.28 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
26 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Officers Md Accn Qtr No 2/3/C,2/3/B,2/4/A,2/4/B,2/2/C At Subhash Marg And 10/1/D At Hm Marg Under Ge East Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish of the premises, complete all as speicified and directed. |
| 2 | M&L Glazed colour ceramic tiles in vertical surface 600mm x 300 mm x 7mm- 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as speicified and directed. |
| 3 | M & L for white ceramic non-skid tiles area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and 7-8 mm thick laid in floors, set and jointed in neat cement to match the shade over , complete all as speicified and directed. |
| 4 | S&F Vitrified Ceramic tiles Light shade 7-8mm thick( square /rectangle) Polished area of each tile not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles , complete all as speicified and directed. |
| 5 | All as per item no. 4 but as in dado/skirting etc over 10mm thick rendering in CM 1:4, complete all as speicified and directed. |
| 6 | M&L for Calibrated Pre Mirror Polised Machine cut kota stone ready to fix kota stone of 18-20 mm thick the Kota stones as in floor are made having a corrugated-like appearance by grooving with machines at back side from the factory and over cement screed base , laid and jointed with grey cement slurry mixed with pigment to match the shade and dismantling of old kota stone , complete all as speicified and directed. |
| 7 | M&L for Calibrated Pre Mirror Polised Machine cut kota stone ready to fix kota stone of 18-20 mm thick the Kota stones as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of stone slab and tiles of any description or thickness , complete all as speicified and directed. |
| 8 | M&L granite tile 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc , complete all as speicified and directed. |
| 9 | All as per item no. 8 but on dado/skirting |
| 10 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in platforms/stair case/ Countertop including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified & directed |
| 11 | Complete treating the old surface of granite and kota stone with grinding rubbing and beeswax polishing complete all as specified and directed. |
| 12 | M&L for 20mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes, complete all as speicified and directed. |
| 13 | M&L for 15mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes , complete all as speicified and directed. |
| 14 | M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces to recive top layer , complete all as speicified and directed. |
| 15 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for , complete all as speicified and directed. |
| 16 | M&L PCC type B-1 1:2:4 (using 20mm graded aggregate) 25 mm thick as in floor finished surfaces fair and even to receive tile , complete all as speicified and directed. |
| 17 | M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level , complete all as speicified and directed. |
| 18 | M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3), complete all as speicified and directed. |
| 19 | Forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade \\"A.\\" , complete all as speicified and directed. |
| 20 | Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) , complete all as speicified and directed. |
| 21 | M&L for providing reinforcement cement concrete 1:2:4 (using 20mm graded stone agg) as in slabs/ beams/column in floors balconies,canopies, desc slabs and the shelves and the like , complete all as speicified and directed. |
| 22 | M&L for RCC chajjas 1:2:4 type B0 (using 12.5mm graded aggregate) as in approved design , complete all as speicified and directed. |
| 23 | Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete , complete all as speicified and directed. |
| 24 | Formwork to cornices and mouldings of any shape in cross section and any girth in fair finished surfaces of concrete , complete all as speicified and directed. |
| 25 | Formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but n.exc 10cm wide rough finish surface of concrete , complete all as speicified and directed. |
| 26 | Form work to edge of concrete flats, breaks in floors, opening in concrete walls,floors and roofs and side of RCC/PCC bands in walls ad similar works n exc 20cm thick , complete all as speicified and directed. |
| 27 | S&F milt steel TMT bars 10mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia , complete all as speicified and directed. |
| 28 | S&F milt steel TMT bars 6 to 8mm dia , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia , complete all as speicified and directed. |
| 29 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed , complete all as speicified and directed. |
| 30 | M&L for coloured designer Chequered cement concrete tiles 300X300X25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments , complete all as speicified and directed. |
| 31 | Providing and laying 60mm thick factory made champhered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibrotary compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demoition of old tiles , complete all as speicified and directed. |
| 32 | PCC 1:4:8 type D-2(using 40mm graded stone aggregate)as in foundation , filling and mass , complete all as speicified and directed. |
| 33 | Supply , Fabrication and fixing of modular wardrobe/ cupboard made out of 16 /18 mm thick HDHMR boards of one side laminated fabric of white colour Note : Before quoting the rates Make of the items should be referred from Appx'A' Make of Products given in tender documents.(Design and pattern as approved by GE). Note : Before quoting the rates Make of the items should be referred from Appx'A' Make of Products given in tender documents. |
| 34 | Supply , Fabrication and fixing of 8 mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of modular kitchen cabinet and wardrobe/ cupboard, (Design and pattern as approved by GE) complete all as specified and as directed. Note : Before quoting the rates Make of the items should be referred from Appx'A' Make of Products given in tender documents. |
| 35 | Providing and fixing 0.8 mm to 1.0 mm thick PVC laminates of approved color, shade, or texture (Design and pattern as approved by GE) on all sides of HDHMR boards of thickness 8 mm, 16 mm, and 18 mm. The laminates shall be cut and fixed to the required size and shape, ensuring proper bonding and alignment so that no bulging or unevenness occurs after drying. Fixing shall be carried out using Fevicol Pro-Bond adhesive or equivalent, and edges shall be rounded smoothly using a router machine to achieve a uniform and fine finish , complete all as speicified and directed. |
| 36 | Providing and fixing 1 to 1.5 mm thick PVC banding tape on all thick side of HDHMR boards of thickness 8 mm, 16 mm, and 18 mm, ensuring proper rounding of edges. The PVC tape shall be in matching shade with the existing laminated surface. Fixing shall be done using Fevicol Pro-Bond adhesive or equivalent, followed by edge rounding with a router machine to achieve a smooth finish , complete all as speicified and directed. |
| 37 | S&F for fancy type stainless steel matt finished bright polished handles oval type of size 150 mm size, complete all the specified and as directed. |
| 38 | S&F of wardrobe locks suitble for door thickness upto 20mm with curved recangular bolt, lock body dia 40mm, barrek dia 16mm, barrek length 20mm made of zinc die cast and key material nickle steel, plastic head 02 Nos complete all as specified and as directed |
| 39 | S&F for magnetic catches with steel body 'H' type fixed to shutter, of complete all as specified under directed, complete all as speicified and directed. |
| 40 | S&F for SS-304 soft closure clip on 3D Adj hinge L-Bihari with 4 hole mounting plate opening angle -100 finish nickel plate 50,000 cycle test of premium quality, fixed in door/ cupboard shutters complete all as specified and directed. |
| 41 | S&F for 500mm SS-304 Full extension ball bearing sliding channel have minimum Weight Carrying Capacity: 35Kg of premium quality, fixed in kitchen cabinet/Wardrobe drawer complete all as specified and directed. |
| 42 | S&F SS-304 Kitchen Plain Wire Basket of size L378mm x D500mm x H150mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures, with ball bearing drawer runnder, prefixed ball bearing runner clamps and chrome finish of premium quality, fixed in kitchen cabinet complete all as specified and directed. |
| 43 | S&F SS-304 Kitchen Plain Wire Basket of size L378mm x D500mm x H100mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures with ball bearing drawer runnder, prefixed ball bearing runner clamps and chrome finish of premium quality, fixed in kitchen cabinet complete all as specified and directed. |
| 44 | S&F Kitchen SS-304 Cutlery wire Basket of size L378mm x D500mm x H100mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures with ball bearing drawer runnder, prefixed ball bearing runner clamps and chrome finish of premium quality, fixed in kitchen cabinet complete all as specified and directed. |
| 45 | S&F Kitchen SS-304 CUP & Soucer wire Basket of size L378mm x D500mm x H100mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures with ball bearing drawer runnder, prefixed ball bearing runner clamps and chrome finish of premium quality, fixed in kitchen cabinet complete all as specified and directed. |
| 46 | S&F Kitchen SS-304 Bottle pullout Wire Basket of size L150mm x D500mm x H450mm, compatible for installation in full extension ball bearing slides, complete with all necessary nails and fixing fixtures prefixed ball bearing runner clamps and chrome finish of premium quality, fixed in kitchen cabinet complete all as specified and directed. |
| 47 | Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not 4 Sqm each , complete all as speicified and directed. |
| 48 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each , complete all as speicified and directed. |
| 49 | Taking down shutters of any description but exc 1 sqm and not exc 2 sqm each and refixing in same opening complete all as specified and directed. |
| 50 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge, complete all as specified and directed. Note: For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made The work for wpc frame shall include the following and rates quoted by bidder shall include same. |
| 51 | Providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges all as per direction of Engineer-In- Charge. The work for wpc shutter shall include the following and rates quoted by bidder shall include same. |
| 52 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length omplete as per direction of Engineer-in-Charge, complete all as specified and directed. Note: For WPC frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made The work for wpc frame shall include the following and rates quoted by bidder shall include same. |
| 53 | Providing and fixing factory made single extruded WPC prelam (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter with 2 mm thick edge moulding tape or 90 degree edge bend finish and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges all as per direction of Engineer-In- Charge. The work for wpc shutter shall include the following and rates quoted by bidder shall include same. |
| 54 | Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC PRELEM DOOR SHUTTER with lamination consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XPM aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws and 2 mm thick edge moulding tape or 90 degree edge bend finish etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.complete all as specified and directed by Engr -In - Charge. approved by Engr -in -charge. The work for wpc shutter shall include the following and rates quoted by bidder shall include same. |
| 55 | S&F floor door stopper 150mm overall length brass body and tongue, anodised, with hard drawn steel spring, fixed in floor , complete all as speicified and directed. |
| 56 | Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 Cu.cm each in 2nd class Hard Wood , complete all as speicified and directed. |
| 57 | S&F mild steel butt hinges heavy weight , cold mild steel of size 125mm, medium weight, cold rolled , complete all as speicified and directed. |
| 58 | S&F 300mm SS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate , complete all as speicified and directed. |
| 59 | S&F brass barrel tower bolt 200mm, stove enamelled black with bright bolts , complete all as speicified and directed. |
| 60 | S&F Brass pressed handles 150mm, oval type, stove enamelled black , complete all as speicified and directed. |
| 61 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, Windows ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 62 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. of Fe-410-W(GdeE-250) quality B to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , complete all as speicified and directed. |
| 63 | S & F 4.8mm thick sheet glass, ordinary quality and in square exc 0.5 sq.m in each pane in any position and all as specified and directed. |
| 64 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as speicified and directed.. |
| 65 | M & L for Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified. |
| 66 | Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones , complete all as speicified and directed. |
| 67 | S&F 3 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane , complete all as speicified and directed. |
| 68 | S&F, Frosted sheet glass 3 mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. |
| 69 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as speicified and directed. |
| 70 | Demolition of Brickwork or stone/boulders masonry built in cement mortar ,complete all as specified and as directed. |
| 71 | M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 72 | All as per item no. 71 but except bricks ( bricks recovered from demolition to be used) |
| 73 | M&L Type B0 (1:2:4) 20 mm aggregate precast cement concrete louvres and jallies, 25mm thick (mea sured solid), set in CM 1:4 including all mould- ings but excluding frame all as specified and directed. |
| 74 | M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings, hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as spcefied and directed |
| 75 | M&L for rendering/plaster by using readymix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar,complete all as specified and as directed. |
| 76 | M&L for rendering/plaster by using readymix mixture of thickness 5 mm to 7 mm on newly prepared surface and plastering the ceiling surface with white cement based polymer modified self curing mortar ,complete all as specified and as directed. |
| 77 | Repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish ,complete all as specified and as directed. |
| 78 | Repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish ,complete all as specified and as directed. |
| 79 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth ,complete all as specified and as directed. |
| 80 | M&L for 1-1.5 mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed. |
| 81 | M & L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means only. |
| 82 | M&L for painting of treated surfaces to recive two coat of distemper oil emulsion on surfaces of walls and ceiling complete all as specified and directed. |
| 83 | M&L for painting with one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc ,complete all as specified and as directed. |
| 84 | All as per item No 83 above but on wooden surfaces. |
| 85 | M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling ,complete all as specified and as directed. |
| 86 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm ,complete all as specified and as directed.Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means) |
| 87 | Dismantling Structural steel work including doors, gates and plate but excluding framed truss etc ,complete all as specified and as directed. |
| 88 | S & F MS steel work in tubular trusses including special shaped washers etc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint ,complete all as specified and as directed. |
| 89 | S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W ,complete all as specified and as directed. |
| 90 | S&F mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A ,complete all as specified and as directed. |
| 91 | M&L for pre painted galvanlume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw ,complete all as specified and as directed. |
| 92 | S&F mild steel screwas bolt (Machine made) with hexagonal or square heads one end screwed , each screwed end have one washer and one nut, dia of shunk 11-15mm and length of bolt exec 5 cm and n exec 10cm.,complete all as specified and as directed. |
| 93 | S&F mild steel flat iron as wind tie for roof including necessary drilling for securing bolts etc ,complete all as specified and as directed. |
| 94 | M&L for painting steel surfaces exc 10cm width or girth with one coat of synthetic enamel paint of approved tint including preparation of surfaces ,complete all as specified and as directed. |
| 95 | S&F in repair to the any existing EWC/IWC has to be converted into a wall hung WC of size 380X515X360 mm with soft close seat cover complete all as specified & directed. Note For Item No 95 To 110 Before quoting the rates Make of the items should be referred from Appx'A' Make of Products given in tender documents. |
| 96 | S&F slim concealed cistern with floor mounting frame, installation kit and 'P' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified & directed. |
| 97 | S&F control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified & directed. |
| 98 | S&F in repair CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook complete all as specified & directed. |
| 99 | S&F in repair 15mm bore high flow Concealed fitting-2 Way Diverter (chrome) with Spouts of brass Bib Cock with auto closing system and built in control cock with wall flange complete all as specified & directed. |
| 100 | S&F in repair 15mm bore high Rain Flow Overhead Shower of 100mm with150mm Arm complete all as specified & directed. |
| 101 | S&F in repair Counter top wash hand basin of size 495 x 395 x 150 mm complete all as specified & directed. |
| 102 | S&F in repair 15mm bore CP brass Pillar cock with wall flange complete all as specified & directed. |
| 103 | S&F in repair CP brass 32 mm dia waste coupling of 130mm height for WHB complete all as specified & directed. |
| 104 | S&F in repair CP brass 32mm bore bottle trap (with internal partition) with 300mm & 175mm long wall connection pipes & Wall flanges complete all as specified & directed. |
| 105 | S&F in repair 15mm bore CP brass Angle Valve stop cock with wall flange complete all as specified & directed. |
| 106 | S&F in repair soap dish complete all as specified & directed. |
| 107 | S&F in repair single towel rail 600mm long complete all as specified & directed. |
| 108 | S&F in repairs glass shelf assembly complete all as specified & directed. |
| 109 | S&F 15mm bore Pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe ,complete all as specified and as directed. |
| 110 | S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or half/quarter turn handle complete all as specified. |
| 111 | S&F Grating doom 125mm dia with \waste hole of (minimum weight 40 gms) ,complete all as specified and as directed. |
| 112 | S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size (flat back or angle back type) in repairs including cutting for and pinning ends of brackets or erecting stand ,complete all as specified and as directed. |
| 113 | S & F in repairs 32 mm bore waste pipe for WHB, Sink, Urinals etc complete all as specified and as directed. |
| 114 | S&F bevelled edge mirror of selected mirror of selected quality glass, mounted on 5mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass and cup washers ,complete all as specified and as directed. |
| 115 | S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed. |
| 116 | S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed. |
| 117 | Dismantling of CI pipes jointed CM & taking out of branches if required ,complete all as specified and as directed. |
| 118 | S&F in cast iron soil sand cast pipes waste and vent pipes in any lenth with or without ears, jointed with lead joints, fixed to wall or laid in trenches / in floors (bore of pipe 100 mm),complete all as specified and as directed. |
| 119 | S&F in cast iron soil sand cast pipes waste and vent pipes in any length with or without ears, jointed with lead joints, fixed to wall or laid in trenches / in floors (bore of pipe 75 mm) ,complete all as specified and as directed. |
| 120 | S&F 75 mm CI bends any radius, diminishing pieces or tapers of any description ,complete all as specified and as directed. |
| 121 | S&F 100 mm CI bends any radius, diminishing pieces or tapers of any description ,complete all as specified and as directed. |
| 122 | S&F PVC (SWR) Gully trap 125/110mm, setting and jointing with solvent cement, fixed in repair ,complete all as specified and as directed. |
| 123 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls ,complete all as specified and as directed. |
| 124 | S & F 75mm mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls,complete all as specified and as directed. |
| 125 | S&F in repairs 110 mm bore Tee/branch piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches ,complete all as specified and as directed. |
| 126 | S&F in repairs 110 mm bore bends piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches ,complete all as specified and as directed. |
| 127 | S&F in repairs 75 mm bore Tee/branch piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as directed by Engr-in-Charge. |
| 128 | S&F in repairs 75 mm bore bends piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as directed by Engr-in-Charge. |
| 129 | S&F 75mm cast iron Nahani trap, with gratting including jointing to waste pipe fixed in cement concrete type B1(1:2:4), fixed in repair ,complete all as specified and as directed. |
| 130 | Taking up or down 15mm dia steel tubing and connections,including cleaning for refixingor removal to store complete all as specified and as directed. |
| 131 | Taking up or down 20mm dia steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and as directed. |
| 132 | S&F 15 mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 133 | S&F 20mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 134 | Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified. |
| 135 | Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified. |
| 136 | S&F 16mm CPVC of Outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings tee, elbow & bends on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 137 | S&F 20 mm CPVC of Outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings tee, elbow & bends on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 138 | S&F CPVC 16mm Brass Elbow to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 139 | S&F CPVC 20mm Brass Elbow to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 140 | S&F CPVC 16mm Brass Tee to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 141 | S&F CPVC 20 mm Brass Tee to connect 16 mm CPVC of outer dia pipes including solvent,on walls/ceiling or laying in grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and directed. |
| 142 | M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cm 1 : 3 width exc 10 cm but not exc 20 cm girth in brick walls etc complete all as specified and as directed. |
| 143 | Dismantling existing water tank of capacity 500ltr capacity and removing to store,complete all as specified and as directed. |
| 144 | S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs complete all as directed. |
| 145 | S&F in repairs 20mm bore dia nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) ,complete all as specified and as directed. |
| 146 | S&F 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair ,complete all as specified and as directed. |
| 147 | S&F, Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) & fixed in repairs , complete all as specified and directed by Engineer-in-Charge. |
| 148 | S&F in repairs CPVC 16mm bore dia union suitable for HDPE water tank. (minimum weight 20mm-45gms) ,complete all as specified and as directed. |
| 149 | Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical Cement & Paint Confirm to IS 2645 - 9103 as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Perma Butyl tape product of Paint and grouting around the inserted pipes by porable grout as directed by Engr-in-Charge.(d) Make angle fillets by using PCC 1:2:4 type B0 and Paint on all corners.(e) Brushing two coats with high performance cementitious elastomeric two components water proofing coating of Paint of thickness 1mm in two coats, Above treatment shall be giving upto height 15cm from bottom slab and allow it dry completely. Above material shall be confirm to below properties- 1. Bulk Density - 1.73g/cc, 2. Elongation - 100% as per ASTM D412 (Min) 3.Hydrostatic Pressure - 4bars as per ASTM D 7088, 4. Adhesion to concrete- Greater than 1.5N/mm2, 5. Crack Bridging ability as per AS/NZS 4548.5 Min 1mm. 6. DFT - 1.5mm in two coats. Seperation Layer- Providing & Laying 120 gsm non woven geo textile membrane over waterproofing coating to protect the coating prior the screed.(f) Providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate mixed with intergral waterproofing compound Cement + Paint as per manufacturer instructions in sunken slab for making slope to wrap hole.(g) Fill the sanitary gaps with Nerolac PermaSIKA/Asian sealing compounds complete. |
| 150 | Providing PCC 1:7:12 type E-2 using 40mm graded stone aggregate in sunken slab ,complete all as specified and as directed. |
| 151 | Dismantling brick tiles or terracing tiles, single layer of roofs and old APP removal including mud pushaka etc roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as directed. |
| 152 | M&L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs/padding /benching or mud stops, and platform for mounting service tanks, rounded,chamfered on edges including necessary use and waste of from work etc all as specified and directed. |
| 153 | M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
| 154 | M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender