Tender For Comprehensive Maintenance Of Certain B/R And E/M Works At Jco/ Ors Md Accn Zone-Ii At Jutogh Cantt Under Ge (I) Jutogh
Tender Value
30 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance Of Certain B/R And E/M Works At Jco/ Ors Md Accn Zone-Ii At Jutogh Cantt Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finished even and fair without using extra cement, complete all as specified and directed. |
| 3 | M&L for rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M&L for rendering 5 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surfaces of wall and applying of two coats of cement base paint over a coat of chalk whitening on plastered surface, preparatory to distempering, complete all as specified and directed. |
| 6 | M&L for prepararation of new plastered surfaces of walls and applying two coat of oil bound distemper over 2 mm thick putty complete all as specified and directed. |
| 7 | M&L for preparation of new plastered surface of ceilling applying three coat white wash, complete all as specified and directed. |
| 8 | M&L for preparing surfaces plastered or unplastered and washing, rubbing down and stopping of distempered and painted surface and applying two coat of oil bound distemper over 2 mm thick putty complete all as specified and directed. |
| 9 | M&L for applying one coat of white washing on ceiling surface, including preparation of old treated/untreated surfaces of walls, cornices etc. by brooming down, steel wire brushing, scraping down smoke soot, moulds, moss, efflorescence salts, trading oil and greasy spots etc., complete all as specified and directed. |
| 10 | M&L for applying one coat of synthetic enamel paint on wooden surface including preparation of old painted wooden surfaces of any description over 10cm width or girth, complete all as specified and directed. |
| 11 | M&L for applying one coat of synthetic enamel paint on steel surface including preparation of old painted steel surfaces of any description over 10cm width or girth, complete all as specified and directed. |
| 12 | M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 13 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | M&L for 75mm thick, PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement, complete all as specified and directed. |
| 15 | M&L for providing 50mm thick cement concrete 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work, complete all as specified and directed. |
| 16 | M&L for 25mm thick PCC 1:2:4, type B-0, as in sub base floor (using 12.5mm graded crushed stone aggregate), finished even & fair without using extra cement, complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 18 | M&L for 16-18 mm thick granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 19 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 20 | M&L for non-skid ceramic coloured tiles joint free premium/ 1st quality (square/ rectengular) 7 to 8 mm thick, area of each tile exc 0.06 sqm but n. exc. 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6, complete all as specified and directed. |
| 21 | M&L for glazed ceramic colour tiles in vertical surface 300x450x7mm/ 350x250x7mm/ 450x350x7 thick in dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM 1:4, complete all as specified and directed. |
| 22 | M&L for glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings/ dados of size 300x600x7 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4, complete all as specified and directed. |
| 23 | M&L for vitrified ceramic light shade tiles premium/1st quality 9-10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6, complete all as specified and directed. |
| 24 | M&L for vitrified ceramic light shade tiles premium/1st quality 9-10mm thick of same description as of floor tiles as in serial item No 23 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4, complete all as specified and directed. |
| 25 | M&L for machine cut kota stone slab flooring 18 to 20 mm thick of size not less than 550mm x 550mm in floor/tread of step, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 26 | M&L for machine cut kota stone slab flooring 18 to 20 mm thick (kota stone shall be cut from size not less than 550mm x 550mm) in skirting, dado, riser of step etc, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10mm thick rendering in CM 1:4, complete all as specified and directed. |
| 27 | M&L for chequered cement concrete tiles pre polished lacuqer and glossy finish 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 28 | M&L for cleaning and removing all scale and dirt etc from PVC/ RCC tanks and mouths of circulating pipe of capacity exceeding 250 litre and upto and including 1000 litre & incl taking down and refixing of tank, complete all as specified and directed. Note :- unit rate shall be included to make small fittings such as elbow, socket, reducer, tee, union etc . |
| 29 | S&F in repair 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer body, 100% UA stabilised, rust proof, hoisted and fixed in position all as specified in SSR Part-I including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minimum weight-210 gram), complete all as specified and directed. |
| 30 | S&F in repair water storage tank, 500 ltr capacity, HDPE triple layer, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including dismantling of water tanks and removing to store all as specified in SSR Part-I, complete all as specified and directed. |
| 31 | Cutting chases in making good to facing where required and pointing in cement mortar 1:3 to end of edges or edges of landing, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tuning or concealed conduit wiring, etc and making good cutting exceeding 20cm girth in brick walls, complete all as specified and directed. |
| 32 | S&F in repair galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 33 | S&F in repair galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed. |
| 34 | S&F in repair 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 35 | S&F in repair 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 36 | S&F in repair fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 37 | S&F in repair bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 38 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 39 | S&F in repair vitreous china wash hand basin white, flat back of size 550x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc., complete all as specified and directed. |
| 40 | S&F in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe complete all as specified and direced. |
| 41 | S&F in repair vitreous china squatting pan, Orissa pattern, of size 580x440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, complete all as specified and directed. |
| 42 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat cover white closed pattern with flat bottom and cover including making connections and fixed in position, complete all as specified and directed. |
| 43 | S&F in repair mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8 mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection, complete all as specified and directed. |
| 44 | S&F in repair 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC, complete all as specified and directed. |
| 45 | S&F in repair grating doom 100mm dia of stainless steel with or without waste hole, complete all as specified and directed. |
| 46 | S&F in repair 20 mm bore Gun–metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 47 | S&F in repair CP brass wall mixture 3-in-1 system for mixing hot and cold water suitable for 15mm bore pipe complete with 115 mm long bend pipe, connecting legs & wall flange and wall bracket for hand shower, complete all as specified and directed. |
| 48 | S&F in repair 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 49 | S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410x330x160mm with 32/40mm bore waste coupling and 32mm bore pvc corrugated pipe 900mm long complete all as specified and directed. |
| 50 | S&F in repair brass chromium plated steel tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 51 | S&F in repair 32 mm dia PVC waste pipe for wash hand basin/ kitchen sink etc of standard length complete all as specified and directed. |
| 52 | M&L for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging, door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing conforming to Fe-410-W, (Grade E-250), quality-'A', complete all as specified and directed. |
| 53 | S&F factory made flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed. |
| 54 | S&F for 2nd class hardwood 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face. The size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 55 | S&F for 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc, without sash bars edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc., sizes of member of shutter as specified in SSR part–I sec 8 clause 8.24 (a), complete all as specified and directed. |
| 56 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and directed. |
| 57 | Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and directed. |
| 58 | Taking down shutters of any description area exc 1 sqm and n. exc 2 sqm each and removing from site, complete all as specified and directed. |
| 59 | Taking down shutters of any description area exc 1 sqm and n. exc. 2 sqm each and refixing in the same opening, complete all as specified and directed. |
| 60 | S&F powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hangung) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete all as specified and directed.Note: (a) Glazing shall be measured and paid separately.(b) Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured.(c) The rates quoted shall be inclusive of neoprene beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight.(d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed. |
| 61 | S&F anodised aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the window frame with C.P brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, complete all as specified and directed. |
| 62 | S&F aluminium (Diecast) body hydraulically door closer regulated, designation No. 3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and directed. |
| 63 | S&F for 65 mm size long mortice lock vertical type, 2 levers with key in duplicate, mild steel body fixed in shutters with screw complete all as specified and directed. |
| 64 | M&L for sheet glass 4.8mm thick tinted quality and glazing with aluminium snap beading, rubber gasket in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 65 | M&L for 12mm thick prelaminated particle board interier grade (grade-1) confirming to IS: 14587 prelaminated both side with decorative choice lamination and fixed to aluminium door shutter with glazing clips, rubber complete all as specified and directed. |
| 66 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 67 | S&F double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :–(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces.(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf.(c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings :i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per windowii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf.(v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf |
| 68 | vi) Pintal hinges 12 x 75 mm – 2 Nos each leafvii) 10mm square Guard bar @ 10 cm c/c welded to frame.(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 69 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 45 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant incl holdfast of size 25x3 mm Flat iron required to fix chowkhat complete all as specified and directed. |
| 70 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant incl holdfast of size 25x3 mm Flat iron required to fix chowkha complete all as specified and directed. |
| 71 | M&L for PCC 1:3:6 type C-1, using 20mm graded crushed stone aggregate as in hold fasts complete all as specified and directed. |
| 72 | S&F stainless steel butt hinges 100mm long medium weight complete all as specified and directed. |
| 73 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 74 | S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 75 | S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 76 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, complete all as specified and directed. |
| 77 | S&F 300mm long aluminum alloy, anodized sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter, complete all as specified and directed. |
| 78 | S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate etc., complete all as specified and directed. |
| 79 | S&F in repair 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 80 | S&F in repair 100mm MS butt hinge medium weight cold rolled complete including fixed to angle or steel chowkhats etc., complete all as specified and directed. |
| 81 | S&F in repair 150mm long aluminium, anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 82 | S&F in repair 300 mm long aluminium alloy ,anodised ,sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed, complete all as specified and directed. |
| 83 | M&L for welding to grills, guard bars, steel windows, fixing of hinges to steel chowkhats and steel door etc., thickness of metal to be welded exc 6mm and not exceeding 9 mm and exceeding 2.5 cm and not exceeding 5.0 cm in length, complete all as specified and directed. |
| 84 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 85 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in CM 1:6, complete all as specified and directed. |
| 86 | M&L for brick work with sub class 'B' old size bricks using old servicable bricks including cleaning of old bricks straight or curved on plan exceeding 6 metre mean radius built in CM 1:6, complete all as specified and directed. |
| 87 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 88 | M&L for reinforced cement concrete 1:2:4, (nominal mix), Type B-1, using 20 mm graded crushed stone aggregate as in chajja etc and necessary formwork/ scaffolding upto 8mtr height, complete all as specified and directed. |
| 89 | M&L for reinforced cement concrete 1:1.5:3, (Nominal Mix), using 20mm graded crushed stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and incl necessary formwork, complete all as specified and directed. |
| 90 | M&L for TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia, complete all as specified and directed. |
| 91 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads, complete all as specified and directed. |
| 92 | M&L for sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 93 | S&F 3mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n. exc. 0.5 sqm each pane, complete all as specified and directed. |
| 94 | S&F galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple, complete all as specified and directed. |
| 95 | S&F in repairgalvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed to steel/wooden /aluminium window/ frame with tinned tacks or galvanised mild steel wire staple, complete all as specified and directed. |
| 96 | S&F in repair stainless steel tubing of 25 mm dia chromium plated min 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc complete fixed as in repair complete all as specified and directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 97 | Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 98 | S&F 100 mm dia (sand cast) Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed in walls, complete all as specified and directed. |
| 99 | S&F 100 mm bore cast iron Bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 100 | S&F 75 mm bore sand cast pipe Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix to wall, complete all as specified and directed. |
| 101 | S&F 75 mm bore cast iron Bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed. |
| 102 | S&F in repair 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement including fixed in cement concrete, complete all as specified and directed. |
| 103 | S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 104 | M&L for PCC 1:5:10, type E-2, using 40mm graded crushed stone aggrgate as in filling in sunken portion floor, rounded or chamfered on edges including demolition and removing from site, complete all as specified and directed. |
| 105 | Demolition of mud in roofs, any thickness, including plastering and leeping (whethere full thickness removed or only a part thereof) including emoving old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work, complete all as specified and directed. |
| 106 | M&L for providing cement concrete 1:2:4, Type B-1, using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, padding,coping rounded or chamfered on edges including from work where ever required, complete all as specified and directed. |
| 107 | M&L for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only.(iv) The work shall be carriout at a height upto 12 metre. |
| 108 | M&L for preparation of any description wood, steel, iron, concrete, brick, stone or any other surface of wall /roof applying of two coats of heat resistant paint, complete all as specified and directed. |
| 109 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed. |
| 110 | S&F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with with coach screws and washers, in roofs, walls etc., with grade of Zinc coating 120 GSM complete all as specified and directed. |
| 111 | S&F 0.63 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 GSM, bent to shape as required, fixed with coach screws and washers in roofs and wall etc, complete all as specified and directed. |
| 112 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws, complete all as specified and directed. |
| 113 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall,eaves board fixed with self tapping screws, complete all as specified and directed. |
| 114 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 115 | S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, bracket, channel or flat sections) including distance pieces cleats Fe 410-W, (Gde-E- 250), quality-A, etc., complete all as specified and directed. |
| 116 | S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water completer all as specified and directed. |
| 117 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed. |
| 118 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, smooth finished, and reforming benching as required for 100mm bore pipe line complete all as specified and directed. |
| 119 | M&L for sunken floor water proofing treatment complete all as under :–(a) Scrapping the surface with wire brush and cleaning with water and allow to dry.(b) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound.(c) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape).(d) Applying cement slurry @ 1.2 kg/sqm duly mixed with water proofing compound.(e) Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.2 kg/sqm.(f) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm.(g) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.20 kg/sqm.(h) Curing the sunken portion with water min 48 hours by ponding.(j) Fixing 50mm bore GI pipe medium grade as in spout of 0.60 mtr length in each sunken. |
| 120 | S&F for stainless steel plate rack standard size 786mmx914mm x 264mm complete and fixing with rawl plug and steel screws of weight not less than 8 kg each, complete all as specified and directed. |
| 121 | S&F continuous (piano) hinges, width of flaps 30mm (when open) mild steel bright finish or electro galvanished, complete all as specified and directed. |
| 122 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 123 | S&F 100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 124 | S&F magnet catcher fixed in cabinet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed. |
| 125 | M&L for 18/19mm thickPrelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame for kitchen cabinets, and shutter work incl dismantling, complete all as specified and directed. |
| 126 | Dismantling timber scantlings, framed/unframed work of size 40 sqcm and over in section, in any position in any position with nails etc., complete all as specified and directed. |
| 127 | M&L for 2nd class HW clean Sawn timber scantling/ posts complete all as specified and directed. |
| 128 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and directed. |
| 129 | M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 130 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl demolition and fair finishes & necessary formwork, complete all as specified and directed. |
| 131 | M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600x600mm grid 6mm thick incl GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, incl hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 132 | S&F for 2nd class hardwood 35 mm thick plain framed panelled shutter (two panel) with top ,bottom and middle rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face. The size of rail bottom 150mm ,middle 150mm and top 100mm and stile of 80-100 mm,kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 133 | S&F in repair glass corner shelf 8mm thick including CP railing radius 200mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 134 | S&F in repair glass corner shelf 8mm thick including CP railing radius 200mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender