Tender For Special Repair To Certain Offrs Md Accn At Anuj Vihar Under Ge (South), Delhi Cantt-1
Tender Value
3.35 Crore
Estimated cost
Bid Submission
24 Aug 2026
9 days left
EMD
4.10 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Certain Offrs Md Accn At Anuj Vihar Under Ge (South), Delhi Cantt-1
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | Amendment No 1 | Date | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and directed. |
| 2 | M & L for Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar complete all as specified and directed. |
| 3 | M & L for Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as directed and specified. |
| 4 | M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded stone crushed aggregate) avg 40mm thick as in roof pedding, finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and directed. |
| 5 | M&L for screed bedding 15 mm thick plaster in CM 1:4 on roof finished even and fair using extra cement on roof with water proofing compound up to four stories bldgs WPC shall be measured and paid seperately complete all as specified and directed. |
| 6 | Supply only water proofing compound (ISI Marked) complete all as specified and directed. |
| 7 | M & L for APP polymeric water proofing membrane minimum 3 mm thick and wieghing not less than 3.0 Kg per Sqm , black finish reinforced with non woven polyester matt with a thermo fasable finish laid over bitumen primer @ 0.50 Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100mm at the sides and 150 mm at the ends, as per manufacturers instructions complete all as specified and directed. |
| 8 | S & F for Heat Resistant Terrace ceramic cool Tiles (300 mm x 300 mm x 10 mm minimum) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner complete all as specified and directed. |
| 9 | M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone crushed aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and directed. |
| 10 | Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons, skirting etc laid bedded and pointed in any morter complete all as specified and directed. |
| 11 | M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps, jambs, window cills, pillars, cooking platforms, skirtings with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20mm thick in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 13 | M & L for Machine cut 18-20 mm thick Kota stone slab flooring (pre polished) as in treads of staircase over cement screed base 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 14 | M & L for Kota stone slab 18-20 mm thick (pre polished) in riser of steps, skirting, dado and pillar, laid over cement screed of 10mm in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 15 | M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed. |
| 16 | M&L for glazed Vitrified Ceramic tiles 600 x 600 mm double charged any shade, 9-10 mm thick (square/ rectangular) polished, as in floors/skirting set and jointed in neat cement slurry and pointed in white or colour complete all as specified and directed. |
| 17 | M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed. |
| 18 | M&L skirting backing coat 10 mm thick (cement plaster 1:4) on fair faces of brick work or concrete surfaces complete all specified and directed. |
| 19 | M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed. |
| 20 | S & F Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of lime concrete bedding complete.Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 21 | S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified and directed. |
| 22 | S & F in repair Vitreous china wash basin with pedestal white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. |
| 23 | S&F in repairs Chromium plated Pillar tap cast copper alloy with capstan heads fency type screwed down high pressure screwed to 15 mm bore iron pipe complete all as specified and directed. |
| 24 | S&F in repairs 15 mm bib tap, brass chromium plated fancy type (quarter turn), long body screwed down including necessary extention piece complete all as specified and directed. |
| 25 | S&F in repair 15 mm dia brass chromium plated angle valve fancy type (quarter turn), screwed at ends including necessary extention piece and fixed complete all as specified and directed. |
| 26 | S & F in repairs one piece EWCs with seat cover and twin flush snow white colour size 710x390x790mm Strap including all fitting complete all as specified and directed. |
| 27 | S & F in repairs table top wash basin of size 610x380x110mm snow white colour including all fittings complete all as specified and directed. |
| 28 | S&F waste coupling with ceramic pop-up full thread 32mm for WHB complete all as specified and directed. |
| 29 | S&Fin repairs bottle trap of size 228 mm for WHB complete all as specified and directed. |
| 30 | S&F CP in repairs pillar cock mixer 2-in-1 long body single handle for counter top wash basin complete with all fittings and complete all as specified and directed. |
| 31 | S&F CP wall mixer 3-in-1 with wall flange complete with all fittings and complete all as specified and directed. |
| 32 | S&F 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings and complete all as specified and directed. |
| 33 | S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and directed. |
| 34 | S&F in repairs Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified and directed. |
| 35 | S & F in repairs Soap disk complete all as specified and directed. |
| 36 | S & F Liquid Soap dispenser complete all as specified and directed. |
| 37 | S & F in repairs toilet paper holder complete all as specified and directed. |
| 38 | S&F in repairs SS Towel rack 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 39 | S&F in repairs SS Towel rail 450mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 40 | S & F Bevelled edge mirror of 5 to 6 mm thick selected quality glass fixed to wooden plugs with Chromium plated brass screws and cup washers, complete all as specified and directed. |
| 41 | S&F in repairs elegent mirror PVC cabinet without towel rail of size 422 x 622 mm complete all as specified and directed. |
| 42 | S&F in repairs chromium plated brass stop cock fancy type (concealed type) screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified and directed. |
| 43 | S&F in repairs brass chromium plated shower rose of size 150 mm with 450mm long arms including fixing to steel pipe complete all as specified and directed. |
| 44 | S&F in repairs Good quality Connecton pipe (PVC) complete all as specified and directed. |
| 45 | S & F in repairs Sinks with drainage board made of 1mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete all as specified and directed. |
| 46 | S&F in repairs Brass chromium plated mode 2 in 1 sink mixture 15mm dia including necessary fittings model Quarter half turn (SOLO) complete all as specified & directed. |
| 47 | S & F in repairs Sinks without drainage board made of 1 mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe, bowl size 460mm x 410mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete all as specified and directed. |
| 48 | S&F in repairs stainless steel plate rack overall size (31 x 30 x 10 inch) fixed with steel screws with wooden gutties and thickness should not be less than 1mm complete all as specified and as directed. |
| 49 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 50 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 51 | Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 52 | S&F 20mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 53 | S&F 25mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 54 | S&F 40 mm outer dia CPVC pipes SDR 11 with and including Plain CPVC SDR 11 fittings for WHB on walls/ceiling or laying in floors complete all as specified and directed. |
| 55 | S&F 20mm outer dia CPVC Union complete all as specified and directed. |
| 56 | S&F 25mm outer dia CPVC Union complete all as specified and directed. |
| 57 | S&F 40mm outer dia CPVC Union complete all as specified and directed. |
| 58 | S&F 20mm outer dia CPVC Tank Adaptor complete all as specified and directed. |
| 59 | S&F 25mm outer dia CPVC Tank Adaptor complete all as specified and directed. |
| 60 | S&F 40mm outer dia CPVC Tank Adaptor complete all as specified and directed. |
| 61 | S&F 20mm outer dia CPVC ball valve/gate valve complete all as specified and directed |
| 62 | S&F 25mm outer dia CPVC ball valve/gate valve complete all as specified and directed |
| 63 | S&F 20mm outer dia CPVC Brass Elbow complete all as specified and directed. |
| 64 | S&F 20mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed |
| 65 | S&F 25mm outer dia CPVC Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed |
| 66 | S&F 20mm outer dia CPVC Brass Tee complete all as specified and directed |
| 67 | S&F Brass reducer 40mm x 25mm outer dia CPVC complete all as specified and directed |
| 68 | M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified and directed. |
| 69 | M&L for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified and directed. |
| 70 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil complete all as specified and directed. |
| 71 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 72 | Removal of excavated surplus soil to a distance not exc 50 metre at a level not exc 1.5m above or below the starting point. complete all as specified and directed. |
| 73 | S & F DWCPE 170mm dia pipe, SN8 all as specified and directed. |
| 74 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone crushed aggregate) as in bed to drain pipes of 100mm bore including packing under and haunching against sides of pipes after they are laid and tested. complete all as specified and directed. |
| 75 | Demolition and breaking up rain water pipes (CI,AC etc) set in any cement mortar of any diameter incl bends complete all as specified and directed. |
| 76 | S/F PVC (SWR) 110mm pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears including clamp as rqd ,110mm bore complete all as specified and directed. |
| 77 | S/F PVC (SWR) 75mm pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete all as specified and directed. |
| 78 | S&F for PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed. |
| 79 | S&F for PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed. |
| 80 | S&F for 110 PVC (SWR) Tee with door plate complete all as specified and as directed. |
| 81 | S&F for 75 mm PVC (SWR) Tee with door plate complete all as specified and as directed. |
| 82 | S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified and as directed. |
| 83 | Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 84 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp, of 110 mm dia complete all as specified and directed. |
| 85 | S&F for PVC (SWR) bends any radius 110mm dia bore complete all as specified and directed. |
| 86 | Demolition of brick work built in cement or cement lime mortar complete all as specified and directed. |
| 87 | M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified. |
| 88 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 89 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 90 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 91 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 92 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 93 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. completeall as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item. |
| 94 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). |
| 95 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 96 | Supply and fixing factory made uPVC white colour Three track three panels sliding Door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and direct. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & widthof profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 97 | S&F 5mm thick toughned glassfixed with uPVC doos and windows including all necessary fittings complete all as specified and directed. |
| 98 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tied tacks or galvanised wire stapple etc. to uPVC doors and windows complete all as specified and directed. |
| 99 | Taking down steel windows complete of any description and shape and size and making good altop, bottom and sides of window openiong with cement mortar (1:4) complete all as specified and directed. |
| 100 | S&F Aluminium windows with outer frame 40mmx114mm with 1.3mm thickness ,corner 45degre cut & aluminum welded center mulion size 40mmx65mm also welded, sutter size 40mmx60mm 1.3 thickness 45degree cut mechinacly joint with 6mm alenkey bolt clamp , 12mm ss 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safty grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side epdm rubber gasket metal body hand lever type single point lock SS friction stay type inges 2 nos per sutter , 40x18mm 45 degree cut & welded mosquito net sutter with aluminum 24 gaug mosquito net ss 75mm long inges & pvc megnat , full system powder coating with pure polister coat of any shape,shade and size as approved by GE and intalling with SS screw roll plug and filled with silicone complete all as specified and directed. Notes :- (i) For installation of window AC/desert cooler the provn of window glass shutter, wire mesh, grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirement during the execution as per direction of Engr-in Charge. (ii) Ref Drwg No. CEDZ/TD-316 dt 07/11/2024 |
| 101 | S&F for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 102 | S&F 100mm size butt hinges stainless steel of AISI 304 complete all as specified and directed. |
| 103 | S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed. |
| 104 | S&F stainless steel of AISI 304 grade barrel tower bolt 200 mm long, extruded section, etc complete all as specified and directed. |
| 105 | S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed. |
| 106 | S&F brass magic eye for panelled/flush shutter 35mm thick complete all as specified and directed. |
| 107 | S & F Floor door stopper (double leg) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete all as specified and directed. |
| 108 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed . |
| 109 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as per direction of Engineer -In-Charge. Note :- Material test certificate and authentication should be compulsory provided by the manufacturing company to GE : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 110 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as per direction of Engineer -In-Charge.Note :- Material test certificate and authentication should be compulsory provided by the manufacturing company to GE : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 111 | S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 112 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. |
| 113 | S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. |
| 114 | S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws complete all as specified and directed. |
| 115 | S&F SS tower bolt size 125mm complete all as specified and directed. |
| 116 | S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed. |
| 117 | S&F, 25mm dia SS curtain rods fency type, including SS bracket and SS side bulb decorative type complete for doors and windows as required complete all as specified and directed. |
| 118 | Distmantling of ceiling boards (fibre, pulp, insulation etc.) or insulation bords/ slab/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 119 | S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and directed. |
| 120 | M&L 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work with screw in ceiling complete all as specified and directed. |
| 121 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 122 | M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 123 | Steel work in tublar trusses, posts raffers, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS - 1161- 1979 gde st -240 complete all as specified and directed. |
| 124 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 125 | S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw all as specified and directed. |
| 126 | M&L preparing of new steel surfaces of any description not otherwise described, over 10 cm width or girth & applying Two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 127 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 128 | M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed |
| 129 | M&L for glosy finished coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed. |
| 130 | Removing excavated soils exc. 500m and and n. ecx 500 mtr depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 131 | Demolition of reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Please Enable Macros to View BoQ information |
| 132 | Demolition of reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender