Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #56512856

Tender For Special Repairs To Retaining Wall At Certain Location Under Age B/R Ii At Dssc Wellington

Issued by Statutory Bodies & Commissions/Committees · Nilgiris, Tamil Nadu
Tender Value
45.46 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
18 days left
EMD
91000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repairs To Retaining Wall At Certain Location Under Age B/R Ii At Dssc Wellington

BOQ

Name of Work:- SPECIAL REPAIRS TO RETAINING WALL AT CERTAIN LOCATION UNDER AGE B/R II AT DSSC WELLINGTON
Sl. No. Item Description
1Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed.
2Excavating in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation etc and getting out in hard /dense soil all as specified and as directed.
3Rough excavation not exceeding 1.50m deep and getting out in Hard/dense soil all as specified and as directed.
4Excavation over areas,n. exc.1.5 mtr deep and getting out hard /dense soil all as specified and as directed.
5Material and labour for providing plain cement concrete 1:4:8 type D2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete all as specified and as directed.
6M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns,band, etc.; basement slabs, under-reamed piles and mass concrete etc all as specified and as directed.
7M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc. complete all as specified and as directed.
8M&L for use and waste of timber as in formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for Rough finished surfaces of concrete flat etc. complete all as specified and as directed.
9M&L use and waste of timber as in formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for fair finished surfaces of concrete flat etc. complete all as specified and as directed.
10S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsetc. complete all as specified and as directed.
11S&F TMT bars Mild steel bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and as directed.
12S&F TMT bars Mild steel bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binder cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and as directed.
13M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid blocks exc 10cm width and setting in mortar(1:6) etc. complete all as specified and as directed.
14M&L 10mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:6 complete all as specified and as directed .
15M&L Preparing New Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint (as approved Tint) over a Coat of Chalk whiting, on plastered surfaces, complete all as specified and as directed.
16M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar in CM(1:6) as in retaining wall,toe wall etc etc. complete all as specified and as directed.
17All as per item No 16 above but except stone(Using old stone obtained from demolition)
18M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggragate as in steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex or bond stones,bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and as directed.
19S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls etc. complete all as specified and as directed.
20M&L raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses on new surfaces of RR masonry complete all as specified and as directed.
21M&L raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses including raking out joints in existing random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and as directed.
22Material and labour for providing plain cement concrete 1:3:6 type C1, using( 20mm graded stone aggregate )as in drain / surface channel including necessary form work complete all as specified and as directed.
23Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.
24M & L for hand packing broken stone aggregate (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level etc. complete all as specified and as directed.
25Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil.
26Removing excavated material (soils) exc. 1.5 Km but n exc. 5 Km and depositing where directed.
27Material and labour for preparation of old random rubble masonary surfaces including removing bushes, shrubs and vegitation if any from block/ stone masonry retaining wall at any height upto 8 metre and making surface clean by removing waste and filling the damaged joints with cememt mortar 1:6 and applying two coats of cement base paint over one coat of chalk white primer etc complete all as specified and as directed.
28Material and labour for mild steel work as inFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc. complete all as specified and as directed.
29M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed
30Taking down old unsv HT / LT UG cable all size and deposite to MES Store yard complete all as specified and directed
31Labour only for re-laying and testing of XLPE insulated, armoured heavy duty electric LT UG cable with aluminium conductor, 1100 volts grade, of any size complete all as specified and as directed.
32Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying of UG Cables, GI Pipe etc. and getting out in hard dense soil complete all as specified and directed .
33Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick with excavated soil complete all as specified and directed.
34Removing of excavated material (Soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.
35M&L for providing sand cushioning for protection of UG cable in trenches with coarse riddled soil/ earth of including filling, spreading and punning down to desired thickness complete and all as specified and directed.
36Supply and laying well burnt old size sub class 'B' bricks of size 230mm x 115mm x 75mm bricks in trenches for cable protection of U/G cables above sand cushioning complete all as specified and directed.
37Supply, laying, jointing & testing XLPE insulated, armoured heavy duty electric cable of size 95 Sqmm 3.5 core with aluminium conductor, 1100 volts grade,etc complete all as specified and directed.
38Supply and fix Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink typejoint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm
39S&F in repairs aluminium cable lugs for the sizes of 95 Sqmm 3.5 core after removing the old /burnt out cable lugs of cable from MCCBs/Changeover/Transformer LT bushing and connecting back cables in MCCBs/Changeover/Transformer LT bushing for size complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56512856
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45.46 Lakhs
LAST DATE 06-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repairs To Retaining Wall At Certain Location Under Age B/R Ii At Dssc Wellington
Basic Detail
Tender No 8661/E8
Bidding Type Tender
Location
City Nilgiris
State Tamil Nadu
Key Dates
Publish Date 16 Jul 2026
Submission Date 06 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 45.46 Lakhs
Tender Fee 500
EMD 91000
Exemption Available
Document List
8661Tender.pdf
98b6427f-8a3f-48c1-9368-5c42d983c933.html
BOQ_872652.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
pdf

8661Tender.pdf

html

98b6427f-8a3f-48c1-9368-5c42d983c933.html

xls

BOQ_872652.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders