Tender For Runway, Taxi Track Painting At Af Stn Bkt
Tender Value
42 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
13 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Runway, Taxi Track Painting At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cultivating/ploughing on an average 30cm depth of shoulders pavement of airfield with mechanicalls or manuameans and levelling the surface as per required gradient after removing/cleaning vegetation, grass with roots, brick bats, stone aggregate and other foreign materials etc.The useless material removing and deposited in low laying area out side of the defence land at any lead complete all as specfied and directed. |
| 2 | M&L for cultivating ploughing on an average 30cm depth of other than shoulders pavement of airfield with mechanically or manualmeans and levelling the suface as per required gradient after removing/cleaning vegetation, grass with roots, brick bats, stone aggregate and other foreign materials etc.The useless material removing and deposited in low laying area out side of the defence land at any lead complete all as specfied and directed. |
| 3 | Rolling and consolidating the formation surfaces by using pneumatic roller or static/power roller of capacity 8 to 12 tonne complete all as specfied and directed. |
| 4 | M&L for complete removal of existing thermoplastic / water base paint layer (any number of layers) over concrete, black bituminous pavements surfaces by mechanial means including removal & cleaning etc complete all as specified and directed. |
| 5 | M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with two coat of water thinable/matt finished road marking retro reflective paint over and including a coat of primer white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality). Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900/7900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047. |
| 6 | M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality). Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900 /7900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047. |
| 7 | M&L for scraping & preparation of new/old treated horizontal concrete or bituminous roads, pavements surfaces not exceeding 10 cm width or girth with wire brushes etc and painting lines, dashes, strips, circles and other markings with one coat of water thinable/matt finished road marking retro reflective paint white/orange/yellow/black or any other colour as approved by GE using mechanical pavement marking machine (Air/Airless spray applications as per IS 164) complete all as specified and as directed. Make: Apcotrack manufactured by Asian paints/ Berger/Nerolac (1st quality) or equivalent make as specified as approved by GE. Note:- Thickness of paint shall be minimum 40 micron (Dry film thickness) for each coat after application. Specification of the machine is as under:- Graco line lazer 5900/7900 with 2 guns and the maximum GPM(LPM) : 1.60 (6.0), PSI (Bar) : 3300 (227), Engine cc (HP) : 160 (5.5) and maximum tip size : 0.043 or Graco line lazer 200 HS with 2 guns and the maximum GPM(LPM) : 2.15 (8.14), PSI (Bar) : 3300 (227), Engine CC (HP) : 200 (6.5) and maximum tip size : 0.047. |
| 8 | Desilting of storm water drain by surface excavation in soft/loose soil settled deposited soil /earth/silt/mud etc not exc 15cm deep from bed of drain, dressing in 'V' shape to drain including cleaning of shrubs, vegitation and grass etc whatsoever with therein, bed of drain including getting out and removing excavated material and deposited the same to a distance not. exc 50 m complete all as specified and directed. |
| 9 | M & L for preparation of old concrete/plastered/kerb stone surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and directed. |
| 10 | M & L for preparation of old concrete/plastered/kerb stone surfaces of any description not otherwise described and not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface complete all as specified and directed. |
| 11 | S&F factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 42mm x 50mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19mm x 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and directed. |
| 12 | S &F window glazing, shall be free from distortion waterproof and with vapour proof seal . The thickness of outer toughened glass shall be 5mm thick with 1.52 mm PVB lamination with 12mm air gap. The glass shall be heat strengthened (HS) and 5mm thick clean toughened glass (inside) prperly sealed window glass shall be sealed with silicon sealent all around . The entrapped moist air between the glass pans shall be dehydrated by certifying drying agents . The double glass shall with stand for sustained wind speed of 12 miles per hour. The make of glass shall be SANT GOBIAN/MODIGUARD/ ASAHI INDIA. Note :- The quoted unit rates includes adequate silicon quantity for sealing and glass pan of required thickness also). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender