Tender For Laying Of Under Ground 33 Kv, 3×300Mm² Xlpe Cable Of Proposed 33 Kv Line For Feeding 33/11 Kv Sub-Station Chilkana-2 (Distt. Saharanpur) From 132 Kv Sub-Station Pilkhani (Saharanpur)
Tender Value
20.51 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
2 days left
EMD
21000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Of Under Ground 33 Kv, 3×300Mm² Xlpe Cable Of Proposed 33 Kv Line For Feeding 33/11 Kv Sub-Station Chilkana-2 (Distt. Saharanpur) From 132 Kv Sub-Station Pilkhani (Saharanpur)
BOQ
| Sl. No. | Item Description |
| 1 | Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: Superintending Engineer, Electricity Construction & Work Circle-I, P.V.V.N.L., Meerut Bought Out Name of Work: Laying of Under Ground 33 KV, 3×300mm² XLPE cable of proposed 33 KV line for feeding 33/11 KV Sub-Station CHILKANA-2 (Distt. Saharanpur) from 132 KV Sub-Station PILKHANI (Saharanpur) Direct Tender Reference No : 31/ECWC-I/MRT/2024-25 Quote for Supply Portion only Bidder Name : Quote for Erection Portion only PRICE BID1. This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns after validating the sheet, else the bidder is liable to be rejected for this tender.2. Bidders are allowed to enter the Bidder Name and Unit Ex-Works Price and GST in %age only.3. All the material and erection practices shall be as per tender specification.4. Above Schedule Structure and quantities is provisional and may vary as per site requirement with due approval.5. Indicative scope of works and quantity of Items/Materials required for above work shall be as per the Price Bid. Any other material if required to complete the job and not mentioned above, shall have to be provided by the bidder without additional cost.6. Financial evaluation and selection of 'L1 Bidder' shall be done on the basis of total amount. The rates received in the tender will be final after the approval of the Competent Authority/Committee and the competent Authority/committee will have the right to negotiate in tender rate/amount.7. Tenderer must be fill-up the enclosed terms & conditions sheet and attached with 1st Part of Tender as well as scanned copy of same will be uploaded on NIC Website alongwith other documents.8. Bidders must be filled up the GST in %age, Otherwise it is assumed G.S.T. rates are included in the given ex-works price (Rs./Unit). NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Works Item Code Tender Qty. Unit Estimated Rate Bought-out/Direct Specify Bought-out/Direct Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Unit Ex-Works Price(Rs./unit) Excise Duty(Rs/Unit) CST/VAT(Rs/Unit) Other Taxes & Duties(Rs/Unit) Freight & Insurance Charges(in Rs./Unit) Unit FOR Dest. Supply Price incl. all Taxes and Duties(in Rs./Unit)(F+G+H+I+J) Total Value for Supply or Erection (In Rs.)(C x F) GST (in Rs.) in %age Total Value for GST (in Rs.) (F*M/100) Total Unit Price incl. GST (in Rs.) Total Amount excl. GST (in Rs.) (4×13) Total Amount incl. GST (in Rs.) (4×26) TOTAL AMOUNT In Words |
| 2 | Supply of following materialM.S Channel 125x65x3200 mm. (Top Channel) |
| 3 | M S Channel 100x50 mm 2240 mm Long |
| 4 | Holding Clamp for Pole |
| 5 | Holding Clamp for cable |
| 6 | Lug for ACSR Dog Conductor (Cable) |
| 7 | Holding Clamp for GI Pipe |
| 8 | Stay Clamp for. Pole |
| 9 | Danger Board with clamp for PCC Pole |
| 10 | Number Plate with clamp for PCC Pole |
| 11 | Aluminum Binding wire |
| 12 | G.I. Barbed wire |
| 13 | M.S. Bolts Nuts & Washers |
| 14 | D-Shackle Insulator |
| 15 | “E” Bracket with nuts and bolts |
| 16 | Stone pad (300×300×75)mm |
| 17 | P.G. clamp for Dog to Dog conductor |
| 18 | G.I. Pipe 150mm dia 3.00 Mtr. long for mounting 3×300mm2 33 KV XLPE Cable on double/four pole structure including cost of clamp etc. |
| 19 | Supply of HDPE Pipe PE-80, PN-6, DN-160mm dia for laying of 33KV, 3x300Sq.mm XLPE cable. |
| 20 | Cable route marker |
| 21 | Safe carriage of following material with loading & unloading at both ends respectively. (under jurisdiction of PVVNL)PCC Pole 11M |
| 22 | 33 KV, 3×300mm² XLPE Cable |
| 23 | Outdoor Type cable Jointing kit for 33 KV XLPE cable 3×300 mm² |
| 24 | Straight Through for 33 KV XLPE cable 30×300 mm² |
| 25 | Stay Sets (20×1800mm) |
| 26 | Stay wire G.I 7/8 SWG |
| 27 | M.S. Earthing Rod (20×2500 mm long) |
| 28 | ACSR Dog Conductor |
| 29 | 33 KV Pin Isulator (Polymer) |
| 30 | Disc Insulators B&S 7000 Kg. (Polymer) |
| 31 | Disc Fittings B&S for Dog 70 KN (Polymer) |
| 32 | Erection of Following materialA- Erection of support after excavation of foundation pit in mix soil/normal soil/soft & hard rock and its back filling and leveling etc. The size of the pit will be (900×600)mm and having depth of 1/6th of the full length of the support & Erection of support. The work includes carriage and handling of supports from site store to pit site.(i) PCC Pole 11M |
| 33 | B- Fixing of M.S. channel & Dropper Channel with all clamps & other accessories on the supports as per drawing. Work includes cutting of holes and providing M.S. Bolts of 16×40mm size in the middle of cross bracing with 1 no. spring washer. The work also includes carriage & handling of accessories from sectional store to pit site as well as any fabrication work if required.(i) Double Pole (a) PCC Pole 11M |
| 34 | Grouting of supports in CC 1:4:8 (Cement, sand & 40 mm brick ballast) Grouting will be done in the block of size (450×450)mm ×1/6th of full length of the support, up to ground level, 300 mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grit) with muffing as per drawing, work includes back filling and proper ramming.(i) PCC Pole 11M |
| 35 | Grouting of stay rod (20×1800mm) including all work of excavation, cement concrete in size (0.60 × 0.60 × 0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg. including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. |
| 36 | Earthing of supports with MS earth Rod (20×2500mm long) including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connecting below the earth electrodes with the help of G.I. wire no. 8 SWG and earthing lugs. |
| 37 | Fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel at double pole. |
| 38 | Fixing of danger board at each location as per specification of the drawing with clamps etc. |
| 39 | Fixing of Number plate with clamp |
| 40 | Wrapping of barbed wire on PCC Poles/SP-55 & SP-72 ST Poles as anti-climbing device for a length of 0.9 Mtr., wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75 Mtr. from the ground complete with supply and fixing of lower end & upper end clamps made of M.S. Flat 40×5mm complete with nuts & bolts & all other required material. |
| 41 | Digging of trench & laying of 3x300Sq.mm², XLPE Cable (Double CKT) in Trench with sand and Brics with loop |
| 42 | Laying of 3x300Sq.mm², XLPE Cable in Air |
| 43 | Laying of HDPE Pipe (PE-80, PN-6, DN-160mm dia) and laying of 33KV, 3x300Sq.mm, XLPE Cable with HDD (trenchless). |
| 44 | Making of 33 KV 3×300mm² cable J/kit Outdoor type & Straight Through |
| 45 | Fixing of cable route marker along the rout of laid 33KV, 3x300Sq.mm, XLPE Cable. |
| 46 | Sundry Item Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender