Tender for Tender for Repair Work On The Damaged Culvert Located On The Dpc Supapali Connecting Road
Tender Value
47 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
5 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
2590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballia → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Work On The Damaged Culvert Located On The Dpc Supapali Connecting Road
BOQ
| Sl. No. | Item Description |
| 1 | Constn. Of embankment with approved materials obtained from borrow pits with all lifts and leas, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.1 & 300.2As per Technical specification clause 301.5 |
| 2 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. |
| 3 | Demolising RCC work by Mechnical means and stackpilling at designated location and disposal of dismentalled matgerials upto a lead of 1 Km. Stacking serviceable and unserviceable matgerials seperately and including cutting rainforcement bar complete in all respect. S.I. No. 694 |
| 4 | RCC grade M30 using batching plant transit mixer & concrete pump. |
| 5 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 6 | Plain cement concrete M25 nominal mix with crushed stone aggregate 40 mm nominal size mechanically mixed |
| 7 | Struck cement pointing in 1:2 cement and fine sand mortar complete in all respect. As per MORT&H 13.2-1300 &2200 |
| 8 | Finishing walls with water proof cement paint. New work two or more coat applied S.I. No. 660+661 |
| 9 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 |
| 10 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger si |
| 11 | Providing and laying boulders apron on river bed for protection against scour with stone boulder weighing not less than 40kg. Each complete as per drawing and technical specification. |
| 12 | Providing and fixing of delenator as per approved drawing. |
| 13 | Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC 67 made of high intensity grade sheeting vide clause 801.3 fixed over alluminium sheeting 1.5mm. Thick supported on a mild steel angle iron post 75mm. X 75mmx6mm. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45x45x60cm. below ground level as per approved drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender