Tender For Repair & Maintenance Of Security / Street Light Including Connected Works Under Age E/M Of Ge Dssc Wellington
Tender Value
34.40 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
9 days left
EMD
68800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Security / Street Light Including Connected Works Under Age E/M Of Ge Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with made of pressure die cast aluminum housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 complete including taking down old unsv one and all as specified and directed .Make ,Havells cat Part No ENDURASUNDOWNSL60W LED 765PASYBOTG / Bajaj: VISTA P 78L WH PO PC SD , Crompton : CRP-409-60-57-SL-GL-NSG |
| 2 | Supply and fixing in repair LED street light fitting 70 Watt 230 V AC outdoor type with made of pressure die cast aluminum housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK07 complete including taking down old unsv one and all as specified and directed .Make Bajaj : VISTA P 91L WH PO PC SD / Crompton : CRP-409-70-57-SL-GL-NSG ,Havells cat Part No ENDURASUNDOWNSL70W LED 765PASYBOTG |
| 3 | Supply and fixing in repair LED street light fitting 45 Watt 230 V AC outdoor type with made of pressure die cast aluminum housing with high efficiency LEDs as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP 66 protection and impact resistance of IK08 complete including taking down old unsv one and all as specified and directed .Make Bajaj : VISTA P 58L WH PO PC SD / Crompton : CRP-409-45-57-SL-GL-NSGHavells cat Part No ENDURASUNDOWNSL45WLED765PASYBOPC |
| 4 | Supply and fixing in repair LED Flood light fittings of capacity 150 Watts, CRI>70, Power factor 0.95 colour tempracture 5700K, luminous efficiency not less than 100 lumens/watt, colour temperature 5700K, 15000 lumens output, IP-65 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cost aluminium housing and finishing eopxy powder coated with all accessories as per manufaurer instructions and connecting up complete including taking down old unsv one and all as specified and directed. Make:- Bajaj : PRAZE F 210L WH NB-A5 TG SD MT / Crompton : LFLN-150-CDL/60-M Havells Cat part No JJETALEGANZAFLS150WLED757P60DTOTG |
| 5 | Supply and fixing in repair LED Flood light fittings for Midmast, of capacity 120 Watts, CRI>70, Power factor 0.95 colour tempracture 5700K, luminous efficiency not less than 100 lumens/watt, colour temperature 5700K, 12000 lumens output, IP-65 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cost aluminium housing and finishing eopxy powder coated with all accessories as per manufaurer instructions and connecting up complete including taking down old unsv one and all as specified and directed. Make Bajaj : PRAZE F 168L WH NB-A5 TG SD / Crompton : CFS-504-120-57-60D-HL2-GL-NSG Havells Cat part No JETALEGANZAFLS120WLED757P60DTOTG |
| 6 | Supply and fixing in repair LED Flood light fittings of capacity 100 Watts, CRI>70, Power factor 0.95 colour tempracture 5700K, luminous efficiency not less than 100 lumens/watt, colour temperature 5700K, 10000 lumens output, IP-65 including electronic driver (SMPS based constant current supply with lower THD, output open/short circuit protection,phase to phase protection, over voltage protection,surge voltage protection etc) unit suitable for working voltage 140-270V AC, 50 Hz pressure die cost aluminium housing and finishing eopxy powder coated with all accessories as per manufaurer instructions and connecting up complete including taking down old unsv one and all as specified and directed.Make:- Bajaj : PRAZE F 120L WH NB-A5 TG SD / Crompton : CFS-504-100-57-60D-HL2-GL-NSGHavells Cat part No JETALEGANZAFLS100WLED757P60DTOTG |
| 7 | Supply and fixing in repair of LED Flood light luminaire with high power of capacity 50Watts (including driver) suitable for working 220-240v AC, 50HZ with inbuilt power unit, Pressure die-cast Aluminum housing with all accessories,connecting up and including taking down u/s fitting complete all as specified and directed .Make Bajaj: GLEAM-XT F 60L WH NB-A3 PC SD / Crompton : CFS-504-50-57-60D-SL-GL-NSG Havells Cat Part No JETALEGANZAFLS50WLED757P60DTOTG / |
| 8 | Supply and fixing in repair of LED Flood light luminaire with high power of capacity 30Watts (including driver) suitable for working 220-240v AC, 50HZ with inbuilt power unit, Pressure die-cast Aluminum housing with all accessories,connecting up and including taking down u/s fitting complete all as specified and directed.Make Havells Cat Part No JETALEGANZAFLS30WLED757P60DTOTG Bajaj: GLEAM-XT F 30L WH NB-A3 PC SD / Crompton : CFS-504-50-57-30D-SL-GL-NSG |
| 9 | Supply and fixing in repiar of Gate / Lawn light fitting of 25 Watts LED Coral type (white colour) with spun aluminium landscape luminaire,Opal PC Cover offers soothing uniform illumination with IP 65 protection with Suitable fixing Nuts for fixing the fitting complete and including taking down the u/s fitting complete all as specified and as directed. Make :- Bajaj: BL ARIAN P N X 40W WW PD / Wipro: LP07-251-XXX-57-CL Havells :Cat Part No CORALPT25WLED730SYMTOPC |
| 10 | Supply and fixing in repair Garden ligtht 9 Watts LED Bollard type with aluminium landscape luminaire with IP 65 protection of size 1 Mtr with fixing accessories complete and including taking down the u/s fitting complete all as specified and as directed Make Bajaj: BGBOL 1000 9W LED WH / Wipro : LB16-111-XXX-57-08 or equivalent |
| 11 | Supply and fixing in repair Garden ligtht 10 Watts LED Bollard type with aluminium landscape luminaire with IP 65 protection of size 1 Mtr with fixing accessories complete and including taking down the u/s fitting complete all as specified and as directed . Make Bajaj Cat Part No TLLUM 10 W 30K 80C3MS S or equivalent Crompton/ Havells |
| 12 | Supply and fixing in repair of LED light fitting suitable for ceiling(surface/suspended) IP>=65, IK>=07, lumens output 150 lm/w,complete with all accessories, prewired, of rating 120 W with min 15000 lumens, 5700 K, with PDC housing and polycarbonate diffuser, suitable for focusing at the height of 7 mtrs (Approx) from FFL including necessary electric connection & fixing arrangement with & incl suitable size/Nos of bolts, nuts, washers etc all as complete and inbuilt electronic driver & high brightness LED all as specified and as as directed. Make : Bajaj : OPTIBAY 120W WH NB PC SD / Crompton : CIP-328-120-57-60D-HL3-LM-NGG Havells Cat part No GAZELLAHBV2P120WLED857PBOTGGRY |
| 13 | Supply and fixing in repair 6 LED Post Top Gate light fitting of 35 Watts with Good indirect symmetrical light distribution, die cast aluminium landscape luminaire with high power COB LED as light source,with IP 65 protection with Suitable fixing Nuts for fixing the fitting complete all as specified and as directed. Make : Havells, Model:SPRING 6, cat Part No: ENDURASPRING6PT35WLED730PSYMTOTG / Bajaj: BRIL 40W LED WW / Philips |
| 14 | Supply and fixing in repair driver suitable for 90W LED street light all as specified and directed. |
| 15 | Supply and fixing in repair driver suitable for 70W LED street light all as specified and directed. |
| 16 | Supply and fixing in repair driver suitable for 60W LED street light all as specified and directed. |
| 17 | Supply and fixing in repair driver suitable for 45W LED street light all as specified and directed . |
| 18 | Supply and fixing in repair driver suitable for 300/150W LED floodlight all as specified and directed . |
| 19 | Supply and fixing in repair driver suitable for 120W LED floodlight all as specified and directed. |
| 20 | Supply and fixing in repair driver suitable for 100W LED floodlight all as specified and directed . |
| 21 | Supply and fixing in repair driver suitable for Coral Gate light fitting 25W LED (driver only) complete all as specified and directed. |
| 22 | Supply and fixing in repair driver with LED Chip set suitable for Bamboo garden light fitting 8W LED (driver+ chip set) complete all as specified and directed. |
| 23 | Supply and fix in replacement Astronomical Timer switch unit operated on AC 110 - 240 V 24 hrs clock, day/week programmable time for controling of street lights and taking down old u/s timer swiches complete all as specified and directed .Make L&T / Bajaj / Crompton |
| 24 | S&F in replacement 3 Pole Power contactor of 40 Amps, AC 240 volts, operation mode ON-OFF-ON , pressure switch type , copper materrial and push button controller suitable for TP controling street light connections and taking down old u/s contactor complete all as specified and directed . Make L&T (MNX 40 )or equivalent Bajaj / C&S/ Crompton |
| 25 | S&F in replacement 3 Pole Power contactor of 32 Amps, AC 240 volts, operation mode ON-OFF-ON , pressure switch type , copper materrial and push button controller suitable for TP controling street light connections and taking down old u/s contactor complete all as specified and directed . Make L&T (MNX 32 ) or equivalent Bajaj / C&S/ Crompton |
| 26 | M&L for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to GI earth Strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and directed. |
| 27 | Supply and fixing in replacement of LED 9 W Pin type suitable for light fittings incl dismantling U/S lamp complete all as specified and directed . |
| 28 | Supply and fixing in replacement of LED 9 W thread type suitable for light fittings incl dismantling U/S lamp complete all as specified and directed. |
| 29 | Supply and fixing in repair loop in- loop out fuse junction box of internal dimension 240x130x95mm made out of FRP sheet with weather proof conopy and locking screw fitted with and incl 6 Amps MCB - 1 No, 50 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular/Rail poles including necessary aluminium clamps, suitable glands, lugs and GI nut and bolts including taking down old u/s junction box complete all as specified and directed .Make :- Sintex Code 2817 or equivalent Bajaj / Havells |
| 30 | S&F in replacement of PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm including necessary end connector fixed in PVC Conduit along with pole structure etc with all fixing & connecting accessories including taking down the old Unsv wire from pole complete all as specified and as directed. Note: PVC conduit shall be measured and paid separately. |
| 31 | S&F in replacement PVC insulated flexible multicore round copper conductor cable of size 3 core 2.5 Sqmm including necessary end connector incl taking down unsv cable complete all as specified and directed. |
| 32 | S & F in repairs Rigid Non-metallic PVC conduits of external dia not less than 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends with aluminium clamp,bolt, nuts etcs complete all as specified and directed . |
| 33 | Supply and fix in replacement bracket suitable for street light, made out of 25 mm dia 1.5 mtr length GI pipe light grade bent to shape fixed with suitable size of clamps (2 Nos), bolts, nuts and washers incl painting with one primer coat and two coat of aluminium paint complete incl taking down old unsv one and all as specified and as directed. |
| 34 | M & L in repair solar street light fitting cleaning of panel and checking of connection any type and capacity and disconnecting and bringing down from pole, re fixing after cleaning of panel complete all as specified and directed |
| 35 | M&L in repair of street light/flood light LED/garden light fitting of any type and capacity disconnecting and bringing down from pole, fixing after repairs including replacement of unserviceable spare parts all as specified and directed Note:- The unserviceable spare parts replaced will be measured and paid seperately |
| 36 | Taking out old unserviceable, burnt, punctured aluminium conductor cable LT, PVC/XLPE, 1100 volts grade, of cross sectional area upto 16 Sqmm all as specified and directed. |
| 37 | Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 core x 16 sq. mm complete all as specified and directed |
| 38 | Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 core x 10 sq. mm complete all as specified and directed |
| 39 | Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 2 core x 16 sq. mm complete all as specified and directed |
| 40 | Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 2 core x 10 sq. mm complete all as specified and directed |
| 41 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m depth for errection of poles, laying of cables etc and getting out in hard/dense soil complete all as specified and directed . |
| 42 | Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth (soil) all as specified and directed . |
| 43 | Removing excavated material (soil) to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed. |
| 44 | M&L for providing sand cushioning for protection of UG cable in trenches with coarse Riddled Earth including filling, spreading and punning down to desired thickness complete and all as specified and directed. |
| 45 | Supply and laying well burnt old size sub class 'B' bricks of size 230mm x 115mm x 75mm bricks in trenches for cable protection of U/G cables above sand cushioning all as specified and directed. |
| 46 | M&L for PCC (1:2:4) type B1, using (20mm graded stone aggregate) for coping of poles including necessary form work etc complete all as specified and directed. |
| 47 | M&L for cutting the existing hard standing/PCC/WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 (using 40mm grade stone aggregate) upto 20 cm depth, finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note : GI pipes shall be measured and paid separately. Please Enable Macros to View BoQ information |
| 48 | M&L for cutting the existing hard standing/PCC/WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 (using 40mm grade stone aggregate) upto 20 cm depth, finishing to a uniform smooth surface to match the existing surface complete all as specified and directed. Note : GI pipes shall be measured and paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender