Tender For Special Repairs To Toilet, Wash Area Flooring, Cupboard, Netlon Screen, Furniture, Inner & Outer Wall Painting Arrangements In Director Of Sericulture C Office Building At Salem In Salem District
Tender Value
16.06 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
10 days left
EMD
16100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Toilet, Wash Area Flooring, Cupboard, Netlon Screen, Furniture, Inner & Outer Wall Painting Arrangements In Director Of Sericulture C Office Building At Salem In Salem District
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Brick masonry in Cement mortar walls under 3m high in etc., complete complying with standard specification |
| 2 | Dismantling plain Cement concrete in etc., complete complying with standard specification |
| 3 | Dismantling AC sheet roofing without roof timbers in etc., complete complying with standard specification |
| 4 | Supplying and fixing colour galvanum sheet roof of 0.47mm thick and steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 5 | Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work. |
| 6 | Supplying and fixing in position best quality Granite sink of size 600 x 600 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] |
| 7 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 8 | Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door.The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 9 | Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. |
| 10 | Supplying and fixing of Curtains for Doors and Windows using Premium quality etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying and fixing of Aluminum Powder Coated Netlon Screen with open able type and using outer aluminium frame in size of 50x25mm with required size and shape, fixing with necessary steel handle, hinges, plugs, screen etc., complete. complying with standard specification |
| 12 | Supplying and fixing of Open able Double Door Wardrobe using Engineered wood including the front of 5.5 mm thick Mirror and the size of Length (46 cm), Width (80 cm), Height (180 cm) has been designed in 4 shutters with overhead storage and internal partition arrangements, hardware and material sing etc., complete complying with standard specification and as directed by the departmental officers. |
| 13 | Supply of sofa set consisting of Five seater covered with leather finish made of Commercial ply wood with the following specification. This frame is made of well seasoned rubber wood upholstery fabric. The cost is inclusive of materials, furniture fittings, labour, loading, unloading and conveyance charges etc. complete and as directed by the departmental officers |
| 14 | Supply of Teak wood teapoy with glass top made out of teak wood frame with bottom shelve, 6 mm toughened glass top and Good polish finish and the cost is inclusive of materials, loading, unloading and conveyance charges etc. complete and as directed by the departmental officers |
| 15 | Supplying and fixing Modern Low-Height Modular TV Unit for living rooms using Plywood + Laminate – Strong, durable, and long-lasting HDHMR + Laminate – High moisture resistance and termite protection Pre-Laminated MDF – Smooth surface with uniform finish Premium Laminate Finish and Scratch-resistant and easy to maintain and also have Two side cabinets with shutter doors for concealed storage Central open shelves for set-top box, gaming console, or sound system Bottom open space for additional accessories or décor Suitable for LED / Smart TVs of small to medium sizes for Floor-mounted unit with stable base support and the cost is inclusive of materials, loading, unloading and conveyance charges etc. complete and as directed by the departmental officers |
| 16 | Supplying and fixing of Rectangular Dining Table (6 Seater) in Top of material used Premium Italian Marble Finish, Table Base Material using Solid Teak Wood Frame with Rich Natural Polish, frames are Solid Teak Wood with 6 Upholstered Dining Chairs all of finishing Glossy polished wood frame and the cost is inclusive of materials, loading, unloading and conveyance charges etc. complete and as directed by the departmental officers |
| 17 | Supplying and fixing of Double cot with mattress using good quality wood of King size 72 to 78 inches (1.83m to 1.98m) 48 inches (1.22 m) including fitting charges, conveyance charges etc complete complying with standard specification. |
| 18 | Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the followingdia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the ismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level |
| 19 | 25 mm dia UPVC pipe |
| 20 | Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 21 | 25 mm dia UPVC Elbow |
| 22 | 25 mm dia UPVC Tee |
| 23 | 25 mm dia UPVC Coupler |
| 24 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 25 | 75 mm dia |
| 26 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 27 | 75 mm dia PVC Elbow |
| 28 | 75 mm dia PVC Tee |
| 29 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 30 | Painting Old Plastered Wall Surface with two finishing coats of ready mixed (Plastic Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 31 | Painting Old Plastered Wall Surface with two finishing coats of ready mixed (Exterior Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 32 | Painting two coat over old iron works such as steel doors, windows, ventilators, window bar balustrades etc., with best approved first quality synthetic enamel paint of approved colour in all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete. |
| 33 | Painting Old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 34 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender