Supply Of IGBT BASED 3 PHASE PROPULSION EQUIPMENT FOR EMU NON AIR-CONDITIONED (ON BOARD - 12 CAR RAKE)

Sharing tender

Supply Of igbt based 3 phase propulsion equipment for emu non air-conditioned (on board - 12 car rake) , pneumatic system comprising of main air compressor set (splash lubricated/oil free) along with mou nting frame assembled with 3 phase induction motor, filters, and pressure switches, control & air dryer, filters etc., a s per clause 4.14.17 of rdso specification. the bidder should indicate the type of compressor offered in this bid. an hour meter shall be provided with ip compliance for monitoring total running hours of compressor. (one set per basi c unit) [ warranty period: 30 months after the date of delivery ] ] , parking brake equipment complete with control, associated valves & wiring etc. as per clause 4.12.8 of rdso specification. (one rake set) [ warranty period: 30 months after the date of delivery ] ] , control equipment viz., contactors, relays, switchgear etc. for propulsion system, control, auxiliary et c. in prewired and assembled condition with modular type panels including crimping lugs, cable markers with heat s hrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories. refer clause 4.10 of rdso specification. (one rake set) [ warranty period: 30 months after the date of delivery ] ] , inter vehicular coupler assembly complete with connectors excluding train line cables as per clause n o. 4.17.4 of rdso specification including crimping lugs, cable markers with transparent heat shrinkable sleeves and mounting & earthing hardware and other associated accessories. (one rake set) note: quantity includes 1 set as sp ares [ warranty period: 30 months after the date of delivery ] ] , set of potential transformer, current transformer and matching overload relay as per clause no. 4.1.8 of rdso specification (one set per basic unit). [ warranty period: 30 months after the date of delivery ] ] , special tools for assembly/disassembly of traction motor including equipment for extraction of pinion & bearing. [ warranty period: 30 months after the date of delivery ] ] , auxiliary compressor along with governor including mounting frame, anti-vibration mountings, mount ing hardware and accessories etc.as per clause 4.14.14 of rdso specification. (one set per basic unit) [ warranty period: 30 months after the date of delivery ] ] , main compressor (splash lubricated/oil free) with three phase induction motor including pressure swit ches, controls & air dryer. etc., as per clause 4.14.17 of rdso specification offered type of compressor shall be sup plied. (one set per basic unit) [ warranty period: 30 months after the date of delivery ] ] , testing kit for traction motor (vvvf control test). [ warranty period: 30 months after the date of del ivery ] ] , hand lamp socket and plug 10a, 250v ac, mobile charging socket with switch plate as per clause no. 4.0(a)(xxxii) of rdso specification. (1 set per rake) [ warranty period: 30 months after the date of delivery ] ] , automatic smoke/fire detection and alarm system as per clause 4.16 of rdso specification. (one rak e set) [ warranty period: 30 months after the date of delivery ] ] , vacuum circuit breaker (ac) with earthing switch and ht door interlocks as per clause 4.13 of rdso specification. (this line item does not include ht cable) (one set per basic unit) note: quantity includes 3 sets as sp ares [ warranty period: 30 months after the date of delivery ] ] , pantograph complete suitable for ac application with mounting insulators and necessary control valv es and isolating cocks including interconnecting bus bars and associated hardware for roof equipment as per clause 4.18 of rdso specification. (one set per basic unit) note: quantity includes 6 sets as spares [ warranty period: 3 0 months after the date of delivery ] ] , roof mounted cab air-conditioning unit (2.0tr min) rivet-less with control panel along with mounting frame and anchoring arrangement to coach body and all the accessories/hardware generally conforming to rdso sp ecification no. rdso/2007/el/ spec/0055 (rev-2 or latest). (one set per dtc). note: quantity includes 1 set as spar es [ warranty period: 30 months after the date of delivery ] ] , all control, power, train line, data and communication cables, fire survival cables including wiring of l ights, fans and papis along with terminal equipment for proper working of entire system and all accessories as per clause 4.17. cables shall be supplied as harness duly cut to size, marked along with protective accessories for prote ction against abrasion and grouped according to area of use. (this line item does not include (a) epdm under cl. 4.1 7.2 (xii), (b) tray under cl. 4.17.2(xiii) (however, design of trays, mounting brackets, earthing arrangement are in su ppliers scope), (c) tcms under cl. 4.17.3 and (d) iv couplers under clause 4.17.4 of rdso specification) (one set pe r basic unit) [ warranty period: 30 months after the date of delivery ] ] , passenger information system comprising double front led destination board in dtcs (head code) an d communication system including 2 nos. of double side display units and 2 nos. of single side display units per coach for passenger area, loud speakers, gps antenna etc., as per clause no. 4.6.2 of rdso specification including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and e arthing hardware and accessories. (one rake set) [ warranty period: 30 months after the date of delivery ] ] , passenger car surveillance system as per rdso specification.no. rdso/spn/tc/106/2025, version 3.1 or latest in all coaches and emergency talk back units ( for ladies compartment) as per clause 4.6.2 (x) of rdso/pe / spec/emu/0163 (rev-3) 2022 (one rake set) [ warranty period: 30 months after the date of delivery ] ] , led lights including emergency lights, disaster management light, ac fans /bldc fans for passenger area and bldc fans for drivers cab/shunting cab and ht & lt compartments, including modular type switches for fa ns, mounting hardware and accessories. as per clause 4.14.15 of rdso specification. alarm mechanism having self- illuminated push button with transparent poly carbonate enclosure & external led indicator (pail - passenger alarm lndication light type-i as per rdso specification no. rdso/pe/spec/tl/0091 -2026(rev.2) or latest) with release p ush button with ss enclosure on either side of the coach, buzzers/hooters, flashing mechanisms for ladies and handi cap compartments/ coaches shall also to be supplied.(one rake set) [ warranty period: 30 months after the date of delivery ] ] , gapless lightning arrestors as per clause 4.2 of rdso specification (one set per basic unit). note: qu antity includes 3 sets as spares [ warranty period: 30 months after the date of delivery ] ] , design, development, manufacture, supply, integration, testing and commissioning of microprocessor controlled igbt based 3 phase propulsion equipment for emu (on board - 12 car rake) as per rdso specn.no. rdso/ pe/ spec/emu/0163 (rev-3) 2022 or latest along with all addendum/corrigendum and all annexures excluding anne xure xvii, annexure xviii, annexure xix, annexure xx of the specification including tools and camc of of 5 years pos t warranty for designated items. the firm to provide necessary instrumentation and special tools as per clause no. 1 .3.7 of rdso spec required for commissioning and field- testing of the equipment. (one set of basic unit consists of one dtc/htc +one mc +one tc). bidders should factor in the quoted prices of the items of any other equipment on returnable basis, which the bidder feels necessary or shall be required during manufacturing, installation, testing/tra ils of the emu rakes but not included in item details of tender document from s.no.1 to 37. note: 1. the bidders are advised to quote only rs.1/- against this item for accountal purpose. 2. additional information to tender description i s at s.no.13 of special conditions of tender document. [ warranty period: 30 months after the date of delivery ] ] , microprocessor based tcms/multiplexing system/ equipment for inter coach data transmission and co ntrols and other accessories including fault diagnosis and display system in the driving cab, multiplexing cables and connectors in assembled form and prewired modular type panels wherever required including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware an d accessories as per clause 4.5, 4.6.1 & 4.17.3 of rdso specification. kavach interface requirement as per clause 1 .1.4(x) and clause 2.8 of rdso specification. (one rake set) [ warranty period: 30 months after the date of deliver y ] ] , igbt based pwm power converter inverter complete as per clause 4.3 & 4.11 of rdso specification w ith dc link with 100 hz resonance filter and /or any other equipment necessary to reduce the effect of other harmon ics on s&t equipment, pre-charging resistor, braking resistor and associated power/control contactors, filters requir ed for harmonic suppression, microprocessor based controls, associated cables including cooling system with acces sories such as equipment anchoring arrangement to coach body & ht compartment interlock system including term ination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mountin g and earthing hardware and accessories including brake control electronics complete system fulfilling the brake bl ending requirements including wheel slip/slide protection and anti- skid controls as per clause 4.12 (4.12.1 to 4.12.7 ) of rdso specification and auxiliary machines as required (one set per mc). [ warranty period: 30 months after t he date of delivery ] ] , asynchronous axle hung nose suspended traction motors with roller bearing suspension compatible w ith igbt controlled power supply with pinion, gear, gear case, nose suspension block and all associated hardware, ai r bellows/air filters and speed/temperature sensor including termination crimping lugs, cable markers with heat shri nkable sleeves for power and control cables, mating connectors, along with all the required hardware, metal bonded rubber items required for fixing traction motor with the bogie frame equipment mounting and earthing hardware an d accessories as per clause 4.4 of rdso specification. (1 set consists of one tm & accessories). note: quantity inclu des 12 sets as spares [ warranty period: 30 months after the date of delivery ] ] , auxiliary converter igbt/sic based, complete with associated cables , cooling system and accessories for power supply to auxiliary machines including auxiliary motor-compressor set (110v dc operated), battery chargi ng, lighting and ventilation of 3 car unit and lighting/ ventilation of adjacent 3 car units in case of extended auxiliary load , termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, with accessories such as equipment anchoring arrangement to coach body, equipment mounting and earthing hardware and accessories including auxiliary machines as required as per clause 4.14.1 to 4.14.13 (one set per basic unit). [ warranty period: 30 months after the date of delivery ] ] , set of air filters for ht compartment in shunting cabs as per clause no. 4.14.18 of rdso specification including sealing system and mounting hardware etc. (one set per mc) [ warranty period: 30 months after the da te of delivery ] ] , speed indicating cum recording system as per clause no. 4.9.4 of rdso specification. (one set per d tc) [ warranty period: 30 months after the date of delivery ] ] , load weighing sensors with adequate redundancies as per clause 4.12.10 of rdso specification. (one rake set) [ warranty period: 30 months after the date of delivery ] ] , cable transit system with epdm rubber modules as per clause no. 4.17.2 (xii) of rdso specification and conforming to rdso/2008/el/spec/0067 (rev 2) of january 2015 or latest for cable entry from underframe /abo ve roof/end wall to passenger compartment, drivers cab, ht /lt compartment. (one rake set) [ warranty period: 30 months after the date of delivery ] ] , complete pre-fabricated drivers desk and cab equipment. the cab shall include all the cab equipment e.g. combined master-cum-brake controller, instrument panel with back-lit instruments, gauges for pneumatic indic ations, control panels, drivers diagnostic display unit & drivers log in device, driver and guard seat etc., ergonomica lly designed driver desk/console, pre-wired and terminated on a terminal board and multi-pin plugs/sockets for inter- equipment connections. the cab-equipment shall also include pneumatic horns, electric motor driven wind screen wipers, sun screens, led twin beam head light with pfc (potential free contact) to enable headlight working status made available in the cab as per clause 4.14.16(a) of rdso specification, auxiliary head light cum tail light, led flas her light, safety related equipment like bell code system. all the above equipment shall include crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware an d accessories. refer clause 4.8.1 to 4.8.2 of rdso specification. the scope of supply also includes led based signal exchange light (as per clause no. 4.14.16(g) of rdso specification) and with pfc (potential free contact) to enable l ed based signal exchange light working status. (one set per dtc). [ warranty period: 30 months after the date of delivery ] ] , complete pre-fabricated and prewired shunting desk assembled with master cum brake controller, in strument panel with back-lit instruments, necessary control switch gear, terminal board and multi-pin plugs/sockets for inter-equipment connections in non-driving motor coaches, termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories as pe r clause 4.8.1 & 4.8.2 of rdso specification. (one set per mc) [ warranty period: 30 months after the date of deli very ] ] , instrumentation required for commissioning and field testing of the equipment (may be taken back by the supplier after completion of the commissioning and field-testing activities) (adequate sets of instrumentation m ust be available at any point of time for commissioning and field-testing activities at icf as well as at user railways) (one rake set) note: the quantity of 3 sets is indicated keeping in view probable splitting of quantity among three successful bidders [ warranty period: 30 months after the date of delivery ] ] , supervision of installation as per clause 18.3 and commissioning as per item no. 18.4 of scc of bid d ocument. (one rake set) [ warranty period: 30 months after the date of delivery ] ] , h.t cable along with protection shield in above roof, ht compartment and under frame area as per cl ause no. 4.13(the scope of supply does not include vcb ) of rdso specification (one set per basic unit) [ warrant y period: 30 months after the date of delivery ] ] , laptops with preloaded licensed essential software including necessary interfacing equipment for dia gnostics (min configuration of 16gb lpddr5 ram, 1tb ssd, 15.6 2k ips display, core i5 latest gen) [ warranty pe riod: 30 months after the date of delivery ] ] , traction transformer complete with cooling system & accessories like thermostat etc. related protecti on equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shri nkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories including oil pump, oil cooling blowers etc., as per clause 4.1.1 to 4.1.7 of rdso specification (one set per basic unit) note: q uantity includes 3 sets as spares [ warranty period: 30 months after the date of delivery ] ] , other tools: list of items consisting of (a) control terminal crimping tools - (2 items), (b) communica tion and control terminal crimping tools - (5 items), (c) power tubular crimping tools - (2 items), (d) supporting to ols - (3 items), (e) lifting platforms tools - (5 items) and (f) mechanical installation supporting tools - (4 items) as p er details at annexure-c. [ warranty period: 30 months after the date of delivery ] ] , camc for items covered under pl.nos. 31903680, 31903605, 31903708, 31904063, 31904075, 3190 3836, 31761148, 31761082, 31761150 and 31759671 for 05 years after completion of warranty period of two years (rate to be quoted year wise) as per the details mentioned in annexure-8 of bid document of tender excluding spare quantity of respective item (one rake set) [ warranty period: 2 years, amc period: 5 years, rate of discounti ng: 10 % ] ]