Tender For construction Of Side Drain Steel Truss And Allied Work At Chc Chiktan (Under Sdp).
Tender Value
94.24 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
4 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
940
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for construction Of Side Drain Steel Truss And Allied Work At Chc Chiktan (Under Sdp).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means over areas in trenches(Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : |
| 2 | All kind of soil |
| 3 | Dumping Stone filling including cost of stone including carraige |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, finishing and reinforcement: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriages complete |
| 5 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete |
| 6 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Black Paint to be used for Trombe Wall) |
| 9 | Providing and fixing traditionally carved wood work (Shingstak) 22 inches thick over main gate including all accessories as per the direction of the Engineer in-charge,with; 2nd class kail wood including varnishing and polish complete job |
| 10 | Reinforced cement concrete work in walls (any thickness ) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding the cost of centring and shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Crushed. |
| 11 | Centering and shuttering inclduing strutting propping etc. and removal of form work Wall any thikness including atteched plister butteresses plinth and string copurse etc' |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding |
| 13 | Supplying and spreading of red/black khak bajri of good earth at site including royalty and carriage upto 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 14 | Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thickcompacted bed of coarse sand, filling theconcrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved Quality,size, design & shape,laid joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 15 | Providing and fixing of main steel Gate ornamentale design including primer, painting etc . and carriage complete job. |
| 16 | Providing and laying MS pipe of 300 mm dia including cement concrete in M10 grade pits , complete job. |
| 17 | Providing hoisting and fixing trusses/purlins/rafters/posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc complete. |
| 18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender