Housing Urban and Rular Development Government Departments Closing in 7 days TDR #56505306

Tender For Upgradation/Improvement Of Various Roads In The C Us Of Dr. Rkgmc Hamirpur At Jol Sappar Km 0/00 To 6/090. (Sh:- Rofd For 7/9 Mtrs Wide, R/Walls/ Breast Walls , C.D, Cement Concrete Pavement, Drain , Parapet & Road Furniture, Dumping Sites

Issued by Government Departments · Hamirpur, Himachal Pradesh
Tender Value
9.18 Crore
Estimated cost
Bid Submission
25 Jul 2026
7 days left
EMD
18.36 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Upgradation/Improvement Of Various Roads In The C Us Of Dr. Rkgmc Hamirpur At Jol Sappar Km 0/00 To 6/090. (Sh:- Rofd For 7/9 Mtrs Wide, R/Walls/ Breast Walls , C.D, Cement Concrete Pavement, Drain , Parapet & Road Furniture, Dumping Sites Etc. In Km 0/0 To 3/00) Estimated Cost:-Rs. 91808789.00 Earnest Money:- Rs. 1836200.00 Time Limit:- Nine Months Cost Of Tender Form:- 10000/-

BOQ

Name of Work:- Upgradation/Improvement of various roads in the c us of Dr. RKGMC Hamirpur at Jol Sappar km 0/00 to 6/090. (SH:- ROFD for 7/9 mtrs wide, R/Walls/ breast walls , C.D, Cement Concrete pavement, drain , Parapet & Road Furniture, Dumping sites etc. in km 0/0 to 3/00) Estimated Cost:-Rs. 91808789.00 Earnest Money:- Rs. 1836200.00 Time Limit:- Nine Months Cost of tender form:- 10000/-
Sl. No. Item Description
1Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of ordinary soil, soft work and hard rocks chiscling/wedging out of rock (where blasting is prohibited) and their intermediate classification of soil setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and as directed by the Engineer in charge at site according to the MORD technical specification clause 300 1602 and 763 and sorting out useful material and stacking the same in all leads and lifis in accuired width of the road and transporation of un useful materail for filling in road ways camber embankments for grade imrovements and disposal of all surplus material to approved dumping site (to be arranged by contractor) through all modes, of transportation including head load or animal transport or mechnical means along with its levelling fine dressing and carriage of machineries, materials, tools equipment rad safety, measures and incidentals necessary to complete the work by mechanical means/labour if required and nothing extra shall be paid on this account All useful material such as stone shingles, aggregate and slate etcetra shall be sorted out and stacked in proper stacks. The carriage of excavated earth and nothing shall be paid on this account. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all case as per direction of the Engineer-in-charge including entire cariage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
2Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil . ordinary rock, hard rock, chiseling/ wedging out of rock (where blasting is prohibited ) as per drawings and M.O.R.D technical specification clause 305-1 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of all surplus materials to approved dumping site(to be arranged by the Contractor) upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
3Construction of embankment and shoulders with approved materials obtained from roadway cutting and excavation of drains and foundation of other structures, graded and compacted to meet requirement of Table 300.1 and 300.2 as per MORD technical specification clause 301.5 as per the direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
4Providing and laying cement concrete 1:5:10 mechanically mixed (one cement : Five sand : ten graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with Mild steel plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls as per drawing and MORD technical specifications clause 802,803,1202and 1203 and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
5Providing and laying cement concrete 1:4:8 mechanically mixed (one cement: four sand: eight graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with Mild steel plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls as per drawing and MORD technical specifications clause 802,803,1202 and 1203 and as per direction of Engineer-in-Charge including entire carriage of material with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
6Back filling behind abutment, wing wall and return wall with Granular material complete as per drawings and MORD Technical Specification Clause 1204.3.8 and as per the direction of the Engineer-in-Charge including carriage of material through all modes of transportation within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
7Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm(one hundred milimetre) dia PVC pipe extending through the full width of the structures with slops of 1(V):20(H) (one vertical : twenty horizontal) towards drawing face complete as per drawing and MORD technical specification clauses 614, 709, 1204.3.7 and as per the direction of the Engineer-in-Charge including carriage of materials through all modes of transportation with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
8Providing and laying mechanically mixed and vibrated plain / reinforced M-10 (M-ten) grade nominal mix cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate) 20mm (twenty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of shush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in open foundation for all types of structures complete as per drawing and MORD technical specifications clause 802,803, 1202 &1203 and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
9Providing and laying mechanically mixed and vibrated reinforced Cement Concrete design mix to obtain minimum compressive strength of M-20 (M- twenty) with minimum cement contents not less than 350 kg/cum(three hundred fifty kilogramme per cubic metre) including cost of form work, and curing complete in sub structure , bed block and dirt wall upto all height/ depth on ground or under water and curing complete including form work with the mild steel plate , including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths as per drawing and MORD technical specification clause 802, 804, 805, 806, 807, 1202 and 1204 as per the direction of Engineer-in –charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
10Providing and laying in position ready mixed plain cement concrete, M-25 (M-Twenty five) with cement content as per approved design mix not less than 400kg/cum(four hundred kilogramme per cubic metre) and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability sas per drawing and MORD technical specifications clause 802, 806, 807, 1202 and 1204 as per direction of the Engineer- in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
11Providing and laying 75mm (Seventy five millimetre) cement concrete wearing coat M-30 grade (M-Thirty)with minimum cement contents not less than 420 kg/cum(four hundred twenty kilogramme per cubic metre) including reinforcement complete as per drawing and Technical Specifications and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
12Construction of RCC railing of M-25 Grade (M-Twenty five)cast in situ with 20mm (Twenty millimetre) nominal size aggregate true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500 (One in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimetres), leaving adequate space between vertical post for expansion, compete as per approved drawings and MORD technical specifications clause 800, 900 and 1208.3 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
13Supplying ,fitting and placing HYSD bar reinforcement made of Tata Toscon, Sail in super structure in all heights including cost of binding wire and cost for cutting binding and placing in position of bars complete as per drawings and MORD technical specification clause 1002, 1010 and 1202 including carriage of material within all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
14Providing and fixing Galvanised iron drainage spout complete as per drawing and MORD technical specification clause 1209 and as per the direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
15Providing and laying flooring laid over cement concrete bedding complete as per drawing and technical specification clause 1303.3 Rubble stone laid in cement mortar 1:3 (One Cement : three sand), as per drawing and technical specification as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
16Preparation and consolidation of sub grade with power road roller of 8 to 12 (Eight to twelve) tonne capacity after excavating earth to an average of 22.5 cm (Twenty two point five centimetre) depth, dressing to camber and consolidating with road roller including making good the undulations etcetra and re-rolling the sub grade and disposal of surplus earth with upto all leads including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
17Construction of granular sub base by providing well graded material mixing in a mechanical mix plant at OMC carriage of mixed material to work site upto all leads spreading in uniform layers with motor grader on prepared surface and compacted with smooth wheel roller 80-100 kn (eighty to one hundred) static roller to achieve the desired density, complete as per MORD technical Specification Clause 401. for grading –I material including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
18Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm(twenty five millimetre)), aggregate cement ratio not to exceed 15:1(fifteen is to one), aggregate gradation after blend and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
19Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 (fourty three) grade ordinar port land cement M-30 (M-thirty) (Grade) with minimum cement contents not less than 420 kg/cum(four hundred twenty kilogramme per cubic metre) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm (twenty five millimetre) and manufactured in fully automatic batching plant and transporated to site of work in transit mixer for all leadshaving continuous agitated mixer manufactured as per mix design of specifie grade for plain cement concrete work including pumping of R.M.C. froon transit mixer to site of laying and curing laid in approved fixed side including form work (steel channel, laying and fixing of 125 (one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs , using curing compound (where specified) and water finishing to lines and grade and concrete joint /panal cutting machine for intial and final cuts as per drawing and MORD Technical Specification section 1501 and as per directions of Engineer- in- Charge including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
20Providing and laying of inter locking concrete paver block vibro compacted upto M-35 (M-thirty five ) grade having thickness 60mm(Sixty millimeter) including border or kerb block over sub base of sand as per drawing and MORD technical specification Clause-1504 approved any make confirming to the Nitco, Modern, Gico, NTC/ BIS specification for interlocking paver blocks including entire carriage of material with in all leads and lifts and other incidentals .The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
21Construction of cement concrete kerb with top and bottom width 115 and 165 mm(one hundred fifteen and one hundred sixty five millimetre) respectively, 250 mm(two hundred fifty) high in M 20(M-twenty) grade on M-15(M-fifteen) grade foundation 150 mm(one hundred fifty millimetre) thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
22Providing and laying of hot applied Thermoplastic compound 2.5mm (two point five millimeter) thick including reflectorising glass beads @250gms(two point five zero gram) per sqm area, with road marking materials with 20%(twenty percent ) glass beads having reflective index of 1.5(one point five millimeter) and 75%(seventy five percent) spherical and indigenous or foreign plant having sufficient strength to withstand heavy load without deformation and having softening point 25 to 30 degree(twenty five to thirty degree) more than the climate temperature of the area in a width of 0.10 (zero point ten metre) strips in specified colour as per directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. .
23Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty to one hundred centimetre) high above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty into one hundred millimetre) rectangular or 75 mm (seventy five millimetre) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 as per the direction of Engineer in Charge including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
24Providing and fixing cat eyes make (3M) (three metre) of size 100×20 mm (one hundred into twenty millimetre), made of heavy-duty body shall be molded dual shank ASA (Acrylic Styrene Acolyretrite) or HP (High Impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion-resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 N tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35° ± 5° (thirty five degree plus minus five degree) to base. The reflective panels on both sides with at least 12 cm²(twenty centimetre square) of each area side as per the direction of Engineer in Charge including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
25Providing and fixing Cast Iron (CI) Cover and Frame of size 600 mm × 600 mm(six hundred millimetre into six hundred millimetre) over reinforced cement concrete utility duct/manhole opening of size 450 mm × 450 mm(four hundred fifty millimetre into four hundred fifty millimetre ) complete in all respects, including cleaning of seating surface, placing and aligning frame, fixing in cement mortar 1:3(one cement: three sand), grouting, finishing, curing, labour, tools and plants, incidental charges, and all leads and lifts. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
26Providing and laying of boulder apron laid in wire crates with 5 mm (five millimetre) dia Galvanised Iron wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (hundred into hundred millimetre) mesh (woven diagonally) including 10 (ten) per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg(twenty five kilograme) each as per drawing and MORD technical specifications Clause 1301 and as per directions of Engineer- in- Charge including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
27Providing and fixing typical informatory sign board with Logo as per MORD specifications and drawing three M.S plates of 1.6mm(one point six millimetre) thick top and middle plate duly welded with M.S flat iron 25mm x 5mm(Twenty five millimetre into five millimeter) size on back on edges. The lower plate will be welded with M.S angle iron frame of 25mmx25mmx5mm(Twenty five millimetre into Twenty five millimetre into five millimetre) The angle iron frame of the lower post plate and flat iron frame of middle plate will be welded to 2 (two) Nos 75x75mm (seventy five into seventy five millimeter) of 12 SWG sheet tubes posts duly embedded in cement concrete M-15(M-Fifteen) grade blocks of 450x450x600mm( Four hundred fifty into Four hundred fifty into Six hundred millimetre ) 600mm(six hundred millimeter) below ground level. Two top most diamond plate will be welded to middle plate by 47mmx47mm (forty seven millimeter into seventy seven millimeter) of 12 SWG steel plate tube. All M.S will be stove enameled on both sides. Lettering and printing arrows border etcetera. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour . All sections of framed posts and steel tube will be painted with primer and two coat of epoxy paint as per drawing and MORD technical specification clause 1701 and annexure 1700.1 including entire carriage of material with in all leads,lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
28Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm(one point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm(sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm(forty seven into foty seven ) of 12(twelve) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm(four hundred fifty into four hundred fifty into six hundred millimeter), 600 mm(six hundred millimetre) below ground level as per approved drawing and MORD technical specifications Clause 1701.2.2 and as per directions of Engineer- in- Charge including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
29Providing and fixing of semi –reflective cautionary, mandatory and informatory sign board as per IRC-67 as per MORD specifications 2014 and drawing of 1.5mm(one point five millimetre) thick mild steel sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 for rural road of required grade and colour supported and welded on 47x47mm(forty seven into forty seven millimetre) of 12 SWG sheet tubes firmly fixed to be ground by meant of properly designed foundation with in cement concrete M-15(M-Fifteen) grade design mix minimum cement content 240kg(Two hundred forty kilogramme) per cubic metre blocks of 450x450x600mm( Four hundred fifty into Four hundred fifty into Six hundred millimetre ) 600mm(six hundred millimeter) below ground level as per approved drawing and MORD technical specifications clause 1701.2.2 800mm x 600 mm (eight hundred millimetre into six hundred millimetre) rectangular including entire carriage of material with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
30Providing and fixing ordinary kilometre stone precast re-inforced cement concrete M-15 (M-Fifteen) grade design mix minium cement content 240kg(Two hundred forty kilogramme) per cubic metre kilometre stone of standard design as per IRC 8, fixing in position including painting and printing etcetera as per drawing and MORD Technical specification 2014 clause 1703 including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government.
31Providing and fixing 200metre(two hundred millimeter) stone (precast) re-inforced cement concrete grade M-15 (M-Fifteen) design mix minimum cement content 240kg(Two hundred forty kilogramme) per cubic metre local stone of standard design as per IRC 8 fixing in position including painting and printing etcetera. as per drawing and MORD technical specification 2014 clause 1703 including entire carriage of material with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government.
32Providing and fixing of reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 including entire carriage of material with in all leads , lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56505306
AUTHORITY Government Departments
TENDER VALUE 9.18 Crore
LAST DATE 25-07-2026
Authority
Authority Name Public Works Department
Work Description Tender for Upgradation/Improvement Of Various Roads In The C Us Of Dr. Rkgmc Hamirpur At Jol Sappar Km 0/00 To 6/090. (Sh:- Rofd For 7/9 Mtrs Wide, R/Walls/ Breast Walls , C.D, Cement Concrete Pavement, Drain , Parapet & Road Furniture, Dumping Sites Etc. In Km 0/0 To 3/00) Estimated Cost:-Rs. 91808789.00 Earnest Money:- Rs. 1836200.00 Time Limit:- Nine Months Cost Of Tender Form:- 10000/-
Basic Detail
Tender No Upgradation/Improvement of various roads in the campus of Dr RKGMC Hamirpur at Jolsappar from KM 0/0
Bidding Type Tender
Location
City Hamirpur
State Himachal Pradesh
Key Dates
Publish Date 17 Jul 2026
Submission Date 25 Jul 2026
Open Date 25 Jul 2026
Finance
Tender Value 9.18 Crore
Tender Fee 10000
EMD 18.36 Lakhs
Exemption Not Available
Document List
48b45354-562a-4fa8-a4ab-e0a5bca7845e.html
BOQ_206284.xls
SBD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Jul 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

48b45354-562a-4fa8-a4ab-e0a5bca7845e.html

xls

BOQ_206284.xls

pdf

SBD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders