Tender For Lifiting & Lowering Of Submersible Pump Motor Set Of 15(Fifteen) Nos Dtw/Mdtw Schemes Within The Jurisdiction Of Jhargram-I(Ai) Sub-Division Under Executive Engineer(Ai), Jhargra(Ai) Division, Jhargram Under Non-Plan.
Tender Value
1.69 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
0 days left
EMD
3400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhargram → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lifiting & Lowering Of Submersible Pump Motor Set Of 15(Fifteen) Nos Dtw/Mdtw Schemes Within The Jurisdiction Of Jhargram-I(Ai) Sub-Division Under Executive Engineer(Ai), Jhargra(Ai) Division, Jhargram Under Non-Plan.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Jul-2026 | Corrigendum | Date | 29-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Withdrawal of electro motor submersible pumping set of following capacities from within the tubewell housing pipe of the following length by using all necessary requisites tools and plants and carefully as per direction of Engineer-in-Charge and stacking the same properly at site within the tubewell premises complete. (a) 100/150/200 cubic metre per hour capacity electro motor pumping set.(ii) Length of pump assembly of any length exceeding 18 metre length. |
| 2 | Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends. 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set). From Sub-Divisional store to work site & From work site to Sub-Divisional store after completion of the work. (A). Carriage by road . (a) Distance upto 50 km. (i) |
| 3 | Transportation of Submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc. from Sub-Divisional Store to worksite including loading at the lifting point and unloading at the delivery point including necessary head load upto 100 metre at both ends. 100/150/200 cubic metre per hour (m3/hr) capacity electro motor pumping set with column pipes and accessories etc. (full set). From Sub-Divisional store to work site & From work site to Sub-Divisional store after completion of the work. (b) Additional distance for each 25 km. beyond 50 km. upto any distance. From Sub-Divisional store to work site & From work site to Sub-Divisional store after completion of the work. |
| 4 | Instalation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tubewell and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.) (a) 100/150/200 cubic metre per hour capacity electro motor pumping set. (ii) Length of pump assembly of any length exceeding 18 metre length. |
| 5 | Charges for prepairing continuity test, insulation test by Megger no load test as per direction of Engineer-in-Charge. |
| 6 | Charge for joining water proof cable with required water proof insulation and proper jointing compound including supplying other related materials complete. |
| 7 | GST as applicable @ 18% |
| 8 | Labour welfare cess @ 1.00% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender