Tender For Repair And Restoration Work Of Jhakhmund Talab, Teh -Talera, Dist.-Bundi
Tender Value
1.47 Crore
Estimated cost
Bid Submission
27 Jul 2026
9 days left
EMD
2.94 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bundi → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Restoration Work Of Jhakhmund Talab, Teh -Talera, Dist.-Bundi
BOQ
| Sl. No. | Item Description |
| 1 | cutting & clearnce of jungle bushes shrubs Ankra/ipomoea, juliflora typna etc on canal and bunds in dry /most/slushy conditions including disposal as per instruction of the engineer in charge cost of wood has been deduction from rates & thus will be property of conctor after cutting |
| 2 | Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect © Hard soil mixed with Kankar / boulders, Morrum Beyond initial lead of 50 m & upto 250m Rate 99.0+9.50=108.50 |
| 3 | Excavation including loading unloading disposal and dressing of excavated rock within initial lead of 50m and lift upto 1.5m in dry or moist including dressing of excavated area, de-watering wherever required complete in all respect. Beyond initial lead of 50 m & upto 250m Rate (a)Phylite & other hard rock requiring nominal blasting |
| 4 | Re-handling of excavated material including loading unloading and dressing within initial lead of 50 m and lift of 1.5 m with cost of de-watering wherever required and all applicable taxes and levies etc. complete in all respect (a)Earth/Soil |
| 5 | Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by vibro compactor, vibro sheep foot roller, sheep foot roller/pneumatic tyred roller to obtain dry density of at least 90% of Standard Proctor's density with initial lift of 1.5m (Excluding charges for compaction and watering) including loading and un-loading wherever required complete in all respect. |
| 6 | Add extra for each subsequent lead of 500m or part there of beyond ½ Km and up to 5 km(3 km) (116.50-19.00 = 97.50 , up to 3 km 8.75*5 = 43.75 ) say rate (97.50+43.75 = 141.25 ) Compaction of earth or highly weathered strata (a) By manually or plain roller. (density 90% of Proctor) |
| 7 | Watering of earth including cost of carriage of water when source of water is (a) up to 1 Km |
| 8 | Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto (d) 20 mm |
| 9 | Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm. |
| 10 | Random rubble stone masonry (usingR.R. stones where75% stones to be not less than15cm in size in any direction and weighing not less than 23kg.) for foundation in cluding curing with all leads of all construction materials including curing etc. Complete (c) In cement sand mortar 1:5 |
| 11 | Random rubble stone masonry (usingR.R. stones where75% stones to be not less than15cm in size in any direction and weighing not less than 23kg.) for foundation in cluding curing with all leads of all construction materials including curing etc. Complete (c) In cement sand mortar 1:5Add extra over item no. 1 to 7 for Rate 4024+190=4214.00 |
| 12 | Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 20 mm |
| 13 | Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 50 mm |
| 14 | Side shuttering including propping etc. complete (to achieve finish F 2 for :Retaining wall, counterfort, abutment, wing walls up stream or down stream slope facings of dams and open faces of construction joints etc |
| 15 | Supplying, Laying & consolidation of quarry rubbish / Murrum / Murda to required grade & camber in layers not exceeding 15 cm. thickness (loose) by road roller as per specifications including dressing etc. complete. |
| 16 | Supplying stone, spall and laying Rip rap in required profile properly hand packed using stone of specified size including all lead & lifts 23 cm thickness (± 5 % thickness tolerance) |
| 17 | Supplying and laying sand of grade as per design requirement in required profile including all lead & lifts.This item is to be used only for laying filter / inverted filter |
| 18 | Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. including labour charge NP-3 Hume Pipe of Dia 900 mm.5941+403=6344 |
| 19 | Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. (ii) Tor or ribbed bars (IS :1786) |
| 20 | Providing and fixing Wiremesh of 100mmx100mm size 3.15mm wire dia each ways or hard drawn steel wire fabric conforming to IS:1566-1957 including all labour and materials with contractor's own equipments Including all applicable taxes and levies etc; complete in all respect. |
| 21 | Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets, wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70±5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150±5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender