Tender For special Repair Of Certain Portion Of Bldg No P-21 And Provn Of Septic Tank Along With Saokage Well Near Bldg No P-78 (Or Cook House) Under Ge Dinjan
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2026
19 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Certain Portion Of Bldg No P-21 And Provn Of Septic Tank Along With Saokage Well Near Bldg No P-78 (Or Cook House) Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | B/R WORKS :Dismantling of corrugated or semi corrugated sheets in roof covering complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges etc , fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length andgirth as fixed) complete all as specified and directed. |
| 5 | Taking down cement plaster including racking out joints hacking for key, scrubbing down with water complete all as specified and directed.. |
| 6 | M & L preparation of new or untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 7 | M&L for rendering 10 mm thick on brick wall on fair face in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | Supply only WPC of approved make complete all as specified and directed. |
| 9 | M&L for preparation of new plastered or unplastered surface of wall and applying three coats of white wash etc complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surface of wall ,chajja facia etc with wall care putty 3mm thick to make the surface even and smooth and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed. |
| 11 | Demolition of brick work in cement mortar or cement lime mortar incl pillars etc complete all as specified and directed. |
| 12 | M&L for brickwork with subclass 'B' bricks well burnt old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortor 1:4 complete all as specified and directed. |
| 13 | Demolition of cement concrete (un reinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | M&L for providing 100mm thick PCC 1:2:4 type B-2 (40mm graded aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 16 | M&L for broken stone boulder as hardcore og gauge n exc 63mm,deposited,spread and levelled in layers n exc 15 cm thiock,watered and rammed to a true surface complete all as specified and directed. |
| 17 | M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 18 | M&L For Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 19 | M/L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed ®as in foundation , mass concrete. complete all as specified and directed. |
| 20 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 21 | S&F Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 22 | Taking down Shutters with chaukhat of any description n exc 1 sq. m each complete all as specified and directed. |
| 23 | M&L for 2nd class hard wood plain , solid straight chowkats and frames , wrought framed well seasoned rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 24 | S&F of 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 25 | Supply only 4mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 26 | M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer including anti termite treatment complete all as specified and directed. |
| 27 | S&F 75mm size butt hinges, Extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type C-22 fixed in rpair and brass/bronze pin is provided in lieu of mild steel hinge pin complete all as specified and directed. |
| 28 | M&L preparation of new steel surface surface any description not otherwise described and over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 29 | M&L preparation of old steel surface surface any description not otherwise described and over 10cm width or girth applying two coats of synthetic enamel paint complete all as specified and directed. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 31 | S&F 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 32 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 33 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 34 | M&L for Oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter including guide channels of area up to 21 Sqm complete all as specified and directed. |
| 35 | M&L for Servicing of steel rolling shutters of area upto 21 sqm (single opening) of lever operated with rectification of minor defects, overhauling, greasing, lubricanting of guide rails and refixing clamps, rivetting including necessary repairs to the locking arrangements and replacement of wornout spare parts such as gear/worm/interlocking laths/ball bearing in order to bring the rolling shutters to easy operation and smooth funtioning all as directed by the Engr-in-Charge.. Note:- The Spare parts will be measured and paid for separately and rate quoted is deemed to include for fixing of spare parts complete all as specified and directed. |
| 36 | Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation , getting out soft / loose soil all as specifed complete all as specified and directed. |
| 37 | Excavating in trenches not exceeding 1.5m wide and exceeding 1.5m but n. exc 3.00m in depth for foundation etc. and getting out soft/ loose soil complete all as specified and directed. |
| 38 | Excavation over areas not exceeding 1.5m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 39 | M & L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete complete all as specified and directed.. |
| 40 | Material and labour for brickwork with old size sub class `B' bricks well burnt straight orcurved on plan not exceeding 6m mean radius as in walls in cement mortar 1:6 complete all as specified and directed. |
| 41 | Material and labour for brickwork with sub class `B' bricks in one brick thick honey comb walling, built in cement mortar 1:3 complete all as specified and directed. |
| 42 | M&L for plain cement concrete type B1 1:2:4 (20mm graded aggregate) as in water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 43 | M & L for Precast cement concrete 1:2:4, Type B1 as in landings, cover slabs (for manholes etc.) water troughs mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed. |
| 44 | M&L for RCC 1:2:4 type B1 ( Nominal Mix ) using 20 mm grade aggregate as in slab supported on walls , beams and columns in floors , roofs and in shelves and the like etc. complete all as specified and directed. |
| 45 | M & L for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exceeding 200mm thk horizontal or sloping, flat and rough finished surface of concrete complete all as specified and directed. |
| 46 | M&L for RCC 1:2:4 type B1 ( Nominal Mix ) using 20 mm grade aggregate as in columns ,pillar,piers, posts and struts etc. complete all as specified and directed. |
| 47 | M&L for RCC 1:2:4 type B1 (Nominal Mix) using 20mm graded aggregate in Beam, cantilever, bressummers, lintel over 1.5m span complete all as specified and directed. |
| 48 | M & L for formwork to sides of square, rectangular or polygonal pillars, posts, columns,struts and piers for rough finished surface of concrete complete all as specified and directed. |
| 49 | M & L for formwork to sides of RCC / PCC bands in walls horizontal or sloping and similar work for rough finished surface of concrete complete all as specified and directed. |
| 50 | M&L for RCC 1:2:4 (using 20 mm grade aggregate) as in partition walls and the like complete all as specified and directed. |
| 51 | M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete complete all as specified and directed. |
| 52 | M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and directed. |
| 53 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. complete all as specified and directed. |
| 54 | M&L for TMT bars 5mm dia and over, upto and including 10mm dia as in stirrups cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. complete all as specified and directed. |
| 55 | M&L for TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. complete all as specified and directed. |
| 56 | S & F for bands, straps, supports or stays for rain water pipes, rungs, two way and three way straps, hooks, clamps, hold fasts and similar articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 57 | M&L for preparing surfaces of steel and iron work new or old of small articles such as stops, covers, gully gratings, hold fasts, end of posts etc area n exc 0.1 sqm each and treated with tar or coal tar black paint complete all as specified and directed. |
| 58 | M&L for rendering 20mm thick in CM 1:4 with water proofing compound on fair facec of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | S&F AC vent pipe 80mm dia complete all as specified and directed. |
| 60 | S&F AC bends plain for pipe 80mm dia complete all as specified and directed. |
| 61 | S&F AC slotted vent cowl 80mm dia complete all as specified and directed. |
| 62 | S&F CI pipe 100mm dia for inlet and outlet complete all as specified and directed. |
| 63 | S&F CI pipe 150mm dia for chamber complete all as specified and directed. |
| 64 | M & L Cast iron work grade Fe 150, unmachined in brackets, gully traps, gratings, ralings, frames, manhole covers, fire and soot doors, dampers stop valve boxes, gate stops complete all as specified and directed. |
| 65 | S&F 150mm dia CI bend and tee piece for pipe complete all as specified and directed. |
| 66 | S&F PVC vent pipe 75mm dia complete all as specified and directed. |
| 67 | S&F PVC vent cowl 75mm dia complete all as specified and directed. |
| 68 | Returning, filling in, includingspreading,leveling, watering and wellramming in layers notexceeding 25 cm insoft/ loose soil complete all as specified and directed. |
| 69 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 70 | S&F SGSW pipe laid in trenches and as specifed for150mm bore of pipes complete all as specified and directed. |
| 71 | M&L for concrete bed to drain pipe in PCC 1:4:8, type D 2 (using 40mm graded aggregate) to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 72 | M&L for cutting into existing manholes for connecting new drain, making good to pipe rendering, cutting out existing benching for and forming branch channel(1/2 round and 3/4 secton) in cement concrete (1:2:4) type B-1 smooth finished and reforming bencing as required for 150 mm dia complete all as specified and directed. |
| 73 | E/M WORKS : Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed. |
| 74 | Taking down carefully old unsv MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
| 75 | Taking down carefully old unsv MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender