Tender For special Repair To Bldg No T-241, T-239, T-156 Of Dogra Scouts & Special Repair To Bldg No T-236 Of Company Army Service Corps (Composite) At Sumdo Under Ge 863 Ews.
Tender Value
47.65 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
18 days left
EMD
95300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-241, T-239, T-156 Of Dogra Scouts & Special Repair To Bldg No T-236 Of Company Army Service Corps (Composite) At Sumdo Under Ge 863 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 2 | M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 3 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed . |
| 4 | M&L for machine cut kota stone slab flooring 20-25mm thick mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 5 | M & L for Virified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 6 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 7 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 8 | M&L for Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) 75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 73 mm wide inserted in position complete all as specified and as directed. |
| 9 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and directed . |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 11 | M & L for glazed ceramic coloured tiles in vertical surface such as skirting, dados and rises to steps etc 350x 250x 7mm / 450X 350X 7mm thick over 10mm thick cement morter in CM 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile complete all as specified and directed. |
| 12 | M&L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing/ interlocking tiles/chequered cement concrete tiles . |
| 13 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 14 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed . |
| 15 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed . |
| 16 | S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws omplete all as specified and directed. |
| 17 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed. |
| 18 | S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed . |
| 19 | S&F for 63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 20 | S&F for 63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 21 | M&L Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe 410-W (Gde E- 250) quality A complete all as specified . |
| 22 | S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 23 | M&L for preparation of new painted on steel surfaces of any description, not otherwise described, over 10cm width or girth and applying Two coat of synthetic enamel paint over red oxide zinc chrome priming complete all as specified and directed. |
| 24 | M&L for preparation of old painted on steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 25 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 26 | M&L for 6mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters complete all as specified & directed. |
| 27 | M&L for 9mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters complete all as specified & directed. |
| 28 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified. |
| 29 | M&L clean sawn 2nd class hard wood in scantling timber framed work fixed with screws/ nails complete all as specified and directed by Engr-in-charge. |
| 30 | Dismantling Unframed timber scantlings under 40 Sq. cm in section and in any position complete all as specified. |
| 31 | M&L 2nd class hard wood for Plain fillets n.exc 3 sq.cm, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed |
| 32 | All as per item above exc 6 sq.cm but n.exc 13 sq.cm but bull nosed, splayed, chamfered or rounded on one edge or face for corner , |
| 33 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 34 | Taking down chowkhats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 35 | S & F II class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints. complete all as specified and directed by Engr In Charge. |
| 36 | S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 37 | S&F anodised aluminium frame for doors, windows, ventilators fabricate & fix anodised aluminium sliding windows/ ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 38 | S&F Anodised aluminium door shutters/ Anodised aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 39 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. complete all as specified |
| 40 | Preparation of new or previously untreated wood and wood based surfacrs of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink Primer complete all as specified & directed.. |
| 41 | Preparation of old painted surfacrs of wood and wood based surfacrs of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink Primer complete all as specified & directed.. |
| 42 | S and F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified |
| 43 | M&L for 6.3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified & directed. |
| 44 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 45 | M&L for 5.5mm thick sheet glass in squares exceeding .50 Sqm in each pane with oil putty in complete all as specified & directed. |
| 46 | S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed. |
| 47 | S&F door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete,all as specified and directed. |
| 48 | S&F 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed. |
| 49 | S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple. |
| 50 | S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified |
| 51 | S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge. |
| 52 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-In-Charge. |
| 53 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140 mm, complete,all as specified and directed. |
| 54 | S & F in repairs 20 mm dia stainless steel curtain rails with brackets and bullab fixed, complete all as specified and directed. |
| 55 | Demolition of precast concrete block walling built in cement morter complete all as directed. |
| 56 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 57 | M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete. |
| 58 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 59 | M & L for rendering 15mm thick in cement plaster 1:4 on fair faces of brick/ block work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed. |
| 60 | M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 61 | Supply only integral water proofing compound (WPC) (ISI marked) complete all as specified and as directed |
| 62 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 63 | M & L for preparation of old plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 64 | M & L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified & directed. |
| 65 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted over and including application of wall care putty as per manufacturer's instructions by finishing the surfaces even and smooth complete all as specified and directed. |
| 66 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 67 | S&F of UPVC 'P' trap 110mm bore,setting and jointing with solvent cement. |
| 68 | S & F in repairs for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 69 | S&F in repair CP jet Spray with 15mm bore flexible connecting pipe complete with all assembly as directed. |
| 70 | S & F in repairs White toilet paper holder, vitreous china box type fixed to wall with chromium plated brass screws,complete all as specified and directed. |
| 71 | S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 72 | S & F in repairs Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe, complete, all as specified and directed. |
| 73 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 74 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 75 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets , 60cm long between flanges complete all as specified and directed. |
| 76 | M & L cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 77 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws Soap dish, vitreous China white, ap proximate size 160x 160x90 all as specified and directed. |
| 78 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 79 | Demolition of reinforced cement concrete cover slab for MH/Spetic tank and removing the debris to a distance not exc 500 M as directed. |
| 80 | M & L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for Man holes/Septic tank set in CM 1:4 complete all as specified and directed. |
| 81 | M&L for mild steel deformed bars or TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 82 | M&L for mild steel deformed bars or TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 83 | S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, complete all as specified and as directed. |
| 84 | S&F in repairs pillar taps cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected. |
| 85 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 86 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 87 | S&F in repair brass CP Wash basins mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe , complete all as specified and as directed. |
| 88 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 89 | S&F in repairs Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed |
| 90 | S&F in repairs stainless steel plate rack 304 grade made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE |
| 91 | S&F PVC waste pipe 32mm bore with cup and washers for WHB complete on new or old locations. |
| 92 | S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed. |
| 93 | S&F in repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement. |
| 94 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store as specified and directed |
| 95 | S&F PUF insulated cylndrical tank of capacity 1000 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hinged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification:-(a) Inner tank will be double layered HDPE food grade material.(b) Outer 4mm thick FRP jointless casing of tank.(c) Thickness of PUF insulation shall be 75mm.(d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. |
| 96 | S & F 1000 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 97 | Dismantling water tanks of capacity exc 1000 & n exc 2000 litres and removing to all store as specified and directed |
| 98 | S&F PUF insulated cylndrical tank of capacity 500 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hinged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification:-(a) Inner tank will be double layered HDPE food grade material.(b) Outer 4mm thick FRP jointless casing of tank.(c) Thickness of PUF insulation shall be 75mm.(d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. |
| 99 | S & F in repair 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 100 | S & F in repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 101 | Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 102 | Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 103 | Taking up or down 25 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 104 | S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 105 | S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 106 | S&F 25mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 107 | Dismantling of cast iron ,PVC or reinforced concrete pipes 110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia |
| 108 | S & F 75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 109 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 110 | S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 111 | S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 112 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 113 | S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 114 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 115 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 116 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc. |
| 117 | M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated standed copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing modular switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 118 | All as per Srl item No 118 here-in-before but controlled with one 3/5 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 119 | All as per Srl item No 118 here-in-before but controlled with one 3 pin socket outlet 5 Amp, Same board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 120 | All as per srl item no 118 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 121 | All as per srl item no 118 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 4 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 122 | Supply and fixing of modular socket 6A-2/3 Pin combined 2 module outlet 5 Amp, 230 Volt, Flush button single pole one way complete all as specified and directed by Engr-in-Charge. |
| 123 | Supply and fixing of modular Switch 1 Way 6 Amp, 1 module 230 volts single pole one way complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply and fixing of modular Switch 1 Way 16 Amp, 1 module 230 volts single pole one way complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fixing of modular socket 6A/16A -2/3 Pin combined 2 module outlet 16 Amp, 230 Volt, Flush button single pole one way complete all as specified and directed by Engr-in-Charge. |
| 126 | Supply and Fixing modular white plate cover with frame 2 module complete all as specified and directed by Engineer-in-charge. |
| 127 | Supply and Fixing modular white plate cover with frame 4 module complete all as specified and directed by Engineer-in-charge. |
| 128 | Supply and Fixing modular white plate cover with frame 6 module complete all as specified and directed by Engineer-in-charge. |
| 129 | Supply and fixing of socket outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 130 | Supply and fixing of switch Piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge. |
| 131 | Supply and fixing of switch Piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge. |
| 132 | Supply and fixing of socket outlet 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 133 | Supply and fixing in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 134 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. |
| 135 | Supply and fixing in replacement LED integrated batten tube light fittings 10W 2 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 136 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 137 | M & L Sheet metal enclosure with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 10 KA complete all as specified and directed by Engineer-in-Charge. |
| 138 | Supply and fixing LED Lamp 12 Watt in lamp (bulb) & holder complete all as specified and directed. |
| 139 | Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 140 | Supply and fix exhaust fan, Steel body body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers all as per specified and directed by Engieer-in - Charge . |
| 141 | Supply and fix electric water heater, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 142 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 143 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 144 | Supply and fixing in replacement of miniature circuit breaker (MCB) SPN 40 to 63 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning |
| 145 | Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 146 | M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works and GI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost. |
| 147 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete |
| 148 | M&L for 3-layer PP-R (Polypropylene random copolymer) 25mm conceled pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc. Including T bends and Elbows. |
| 149 | M&L for PP-R Gate valves 25mm (brass insert) as per requirement of the site. |
| 150 | S&F Ball brass valves 25 mm, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. |
| 151 | Supply, fixing, testing and Commissioning of electric Chimney for cook house of size 36X18 inchs stainles steel with oil filter 20 guage SS hood minimum 10 feet with ducting GI Sheet 24 Guage minimum 240 sq feet of duct size 12X24 inch with necessary work vertical bend, angle frame threading nuts nut bolts along with damper with 01 HP XL fan blower motor exhaust air complete with suitable wire for motor fan connection as specified and directed by Engr-In-Charge. |
| 152 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete |
| 153 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender