Tender For Certain Repairs To Sunken Portions,Flooring, Plastering, Joinery,Sanitary Fittings, Periodical And Internal Water Supply Incl Misc Repair Works To Bldg In Block No From 19 To 27 At Tejas Enclave At Afssr Gurgaon Under Age B/R (A/F) Gurgaon
Tender Value
40 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Sunken Portions,Flooring, Plastering, Joinery,Sanitary Fittings, Periodical And Internal Water Supply Incl Misc Repair Works To Bldg In Block No From 19 To 27 At Tejas Enclave At Afssr Gurgaon Under Age B/R (A/F) Gurgaon Of Ge A/F Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down PVC (SWR) pipes of any description with fitting and making good to disterbed surfaces.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 2 | S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls/floor with dash through nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 3 | S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls/floor including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 4 | S&F 110mm bore PVC (SWR) bends any radius With access door complete all as specified and directed by Engineer-in-charge. |
| 5 | S&F PVC(SWR) single equal branch pieces 110 mm bore \\"T\\" type with oval access doors complete all as specified and as directed by Engineer-in-Charge. |
| 6 | S&F PVC(SWR) single equal branch pieces 110 mm bore \\"Y\\" equal or unequal with access door complete all as specified and as directed |
| 7 | S&F 75mm bore PVC (SWR) bends any radius With access door complete all as specified and as directed |
| 8 | S&F PVC(SWR) single equal branch pieces 75 mm bore \\"T\\" type with oval access doors complete all as specified and as directed by Engineer-in-Charge. |
| 9 | S&F 75mm bore( SWR) vent cowl complete all as specified and as directed |
| 10 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 11 | Taking up or down Steel Tubing 50mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 12 | Supplying and laying of CPVC pipes 20mm dia of outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all fittings and its connection to GI/PPR pipe as required complete all as specified and directed |
| 13 | S&F 50 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls/floor including cutting through wall, floors, etc and their making good, complete all as specified and direced. |
| 14 | S&F 50 mm bore dia 'UNION' of galvanized steel tubes medium grade laid concealed in walls/floor including cutting through wall, floors,pipe etc and their making good, complete all as specified and direced. |
| 15 | S&F 50 mm bore dia 'TEE' of galvanized steel tubes medium grade laid concealed in walls/floor including cutting through wall, floors,pipe etc and their making good, complete all as specified and direced. |
| 16 | Easing and adjusting steel door frame and shutters including taking down shutter and refixing after necessary repair works complete all as specified and directed. |
| 17 | M&L for Welding in repairs n.exc 5 cm in length, any thickneess of metal to be welded for repair to doors, windows, railing etc complete all as specified and directed. |
| 18 | Dismantling mild steel work of any description not otherwise complete all as specified and as directed by Engr-in-charge. |
| 19 | S&F plain black, mild steel sheeting 0.63 mm thick, in repair to door, windows, railing, ridges, hips, valley gutters, drip and straight flashings( length and girth as fixed) complete all as specified and directed. Note: Cost includes cutting of sheet in required size to repair of steel door , windows etc and fixing with welding. |
| 20 | S&F of Mild steel, plain, black sheet of thickness 1.25mm in steel gates(shaft or store or garage) and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed |
| 21 | S&F in repair Framed work with steel Gde Fe-410-O or Fe-310-O as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed. |
| 22 | S&F of Butt hinges of size 125mm , heavy weight, cold rolled mild steel, and fixed and complete all as specified and directed |
| 23 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire stapel etc complete all as secified and as directed. |
| 24 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire stapel etc on existing iron mesh doors complete all as secified and as directed. |
| 25 | M&L two coats of synthetic enamel painting over a Priming coat of Red oxide Zinc chrome on New steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces. |
| 26 | M&L One coats of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces. |
| 27 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed |
| 28 | Taking down Chowkats or frames from the opening of size n exc 1.5 Sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 29 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqm but not exc 4 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 30 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed |
| 31 | S&F of aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 32 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 33 | S&F plain Sheet glass4.8mm thick plain or tinted,fixed to aluminium doors/windows/ventilators complete all as specified and directed.(Note: Beading/rubber packing is included in the rates for aluminium section above) |
| 34 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be include in the quoted lum sum). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 35 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be included in the lumpsum quoted by the contractor. |
| 36 | S&F pressed steel frames 1.25mm thick for door size of frame105 X 60mm with single rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 37 | S&F pressed steel frames 1.25mm thick for door size of frame195 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 38 | S&F 2nd class hard wood Glazed/skeleton shutters, 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed |
| 39 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 40 | M&L solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing complete all as specified as directed. |
| 41 | M&L factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing omplete all as specified as directed. |
| 42 | S&F magnetic door catches of stainless steel body used in cabinet doors with striking plate including letting in complete all as specified and directed by Engineer-In- Charge. |
| 43 | S&F in repair 30mm wide flaps continuous (Piano) hinges stainless steel bright finish complete all as specified and directed by Engineer-In- Charge. |
| 44 | S&F Aluminium alloy Anodised, sliding door bolts 300mm long with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed Complete all as specified and directed. |
| 45 | S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and directed. |
| 46 | S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed |
| 47 | S&F Aluminium handles, 100mm size cast type anodised complete all as specified and directed |
| 48 | S&F stainless steel 100 mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed to door shutters and frames complete all as specified and directed by Engineer-in-Charge. |
| 50 | Demolition of Cement Concrete in sunken/ground floors and pavings exc 15 cm thickness above or below ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. |
| 51 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:3 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and directed |
| 52 | Supply only integral water proofing compound. |
| 53 | M&L for applying evenly a coat of epoxy compound of Dr Fixit or equalvent as approved by Engrineer-In-Charge as in sunken portion of WC including cleaning surfaces complete all as specified and as directed |
| 54 | M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in sunken slab, filling and mass concrete complete all as specified and directed |
| 55 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and directed |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 57 | M&L 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. |
| 58 | M&L 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. |
| 59 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the Tiles, laid over complete all as specified and as directed. |
| 60 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the Tiles, laid over complete all as specified and as directed. |
| 61 | M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over complete all as specified and as directed. |
| 62 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completee complete all as specified and directed |
| 63 | M&L for 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-In- Charge. |
| 64 | M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) usingmarble dust with admixture of pigment to match with shade of granite.complete all as specified and as directed by Engineer-In- Charge. |
| 65 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. |
| 66 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed.Note:- Area includes in this items upto 6 stories of building. |
| 67 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directeNote:- Area includes in this items upto 6 stories of building. |
| 68 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 69 | M&L for preparing new plastered surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. |
| 70 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. |
| 71 | M & L for 1.5mm thick wall care putty on wall complete all as specified and as directed. |
| 72 | M&L preparing old Distempered surfaces of ceiling by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying one coat of oil bond distemper white or any tint etc complete as specified and directedNote:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost.ite or any tint etc complete as specified and directed |
| 73 | M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying One coat of oil emulsion distemper white or any tint etc complete as specified and directed Note:- a) Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) Furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any extra cost. |
| 74 | M&L preparing old Plastered Surfaces of Walls upto any storey by Complete Removal of existing Surfaces by scrapping down mechenically complete all as specified and as directed. |
| 75 | M&L preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion over a coat of primer (as approved), complete all as specified and as directed.Note:- a) Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) Furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any extra cost. |
| 76 | M&L for preparation of new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 77 | Checking and repair to leakages of each SMQ consist of Checking and repair to leakages in bib taps, mixer taps, stop cocks, angle valves, flushing cisterns, GI pipes, etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings all connected plumbing works etc complete all as spd & directed.Note :- Material such as washer, thread,safeda,screw,M-seal etc included in quated cost. |
| 78 | S&F in repair brass spindle (face part) heavy duty for CP pillar cock,stop cock,Bib cock, wall mixer,basin mixer,conceled stop cock etc 15mm bore complete all as specified and directed. |
| 79 | Disconnecting existing water tanks n.exe 250 Ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required and reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc |
| 80 | S&F in repair polythene water storage tank 200 Ltr capacity as approved by engr-in-Charge, closed top hoisted incl 15mm float valve,socket and fixed in position incl Dismantling of existing water tanks n.exc 250 Ltr complete all as specified and directed. |
| 81 | S&F in repair white vitreous china Wash down water closet EWC type ( Pedestal pattern) white ,incl Pedestal pan and trap, connection to drain ( or outgoing pipe) and to flushing pipe , anti -syphonage pipe, etc., complete all as specified and as directed by Engr-in-charge. |
| 82 | S&F in repair vitreous China wash basin white, flat back size 550x400mm excluding tap but including S&F 32mm dia CP waste coupling, brackets complete all as specified and as directed. |
| 83 | S&F Seat Cover made with High Density plastic Seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 84 | S&F in repair Seat Cover made with High Density plastic Seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 85 | S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed.MAKE : JAQUAR ALD-CHR-585 or equivalent in GEM/ MARC (as approved by GE). |
| 86 | M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 87 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm. |
| 88 | S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with wall and of plastic frame and Fixed-in-repairs, complete all as specified and as directed. |
| 89 | S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed. |
| 90 | S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 91 | S&F in repair waste fitting brass chromium plated of 40 mm dia for sink with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 92 | S&F in repair 610 mm long PVC waste pipe flexible type 25mm dia suitable for coupling 32mm & 40 mm dia complete all as specified and directed. |
| 93 | S&F in repair MS bracket upto 450mm long for wash basin and sink incl Refixing of existing wash basin and sink and minor repair complete all as specified and directed by Engr-in-Charge. |
| 94 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed |
| 95 | S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed. |
| 96 | S&F in repairs Brass Chromium Plated Central Hole Mixture 15mm bore (dia) without Popup Waste System with 450mm long provided Hoses including Flange suitable for Wash Hand Basin complete all as specified and as directed. |
| 97 | S&F in repair brass Chromium Plated wall Mixture for mixing Hot and Cold for Shower suitable for fixing 15mm bore (dia) Pipe including Flange, suitable for bath mixture complete all as specified and as directed. |
| 98 | S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size (weight not less than 8 Kg), made out of Stainless Steel 1.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws and fixed to wall , complete all as specified and as directed. |
| 99 | Taking down damaged/unserviceable Asbestos Plain Building Boards of any descriptions, complete all as specified and as as directed. |
| 100 | M&L Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, complete all as specified and as directed. |
| 101 | M&L Washed stone girth plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 Coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster WITH SILVER COLOUR CEMENT 1:1/2 : 2 ( 1 Silver Cement : 1/2 coarse sand : 2 Marble stone chipping 10mm nominal size) inpanels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble stone chippings complete all as specified the groove shall be 15mm wide and 15mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specification and direction of the Engineer-in-Charge.Note:- Area includes in this items upto 6 stories of building, necessary scaffolding and arrengments are deemed to be included in the lum sum rates. |
| 102 | S&F in repairs of sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 103 | S&F in repairs Harrison rails,anodised aluminium chromium plated with fixing brackets, stops, rollers etc including taking down old curtain rod of any description, complete all as specified and as directed. |
| 104 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and as directed . |
| 105 | M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. |
| 106 | M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M35 grade concrete match with grey cement and no pigment etc complete all as specified and directed. |
| 107 | M&L cement mortar (1:4) for screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and directed |
| 108 | M&L for exterior grade coloured, glossy finished, rubber pressed precast chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed |
| 109 | M&L for preparation of old concrete surface of kerb stone and applying one coat of synthetic enamel paint etc complete all as specified and as directed |
| 110 | M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded crushed stone aggregates as in cover slabs (for manholes etc),drain covers, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and as directed Note - Reinforcement shall be measured and paid separetly |
| 111 | M&L for TMT bars upto 10mm dia as in reinforcement for concrete, cut to length, bent to shape required including cranking , bending spiraly for hooping for columns, hooking with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed |
| 112 | Dewatering including sludging mud incl Cleaning and removing all scale and dirt, etc with brush from OVERHEAD WATER TANKS of capacity exc 10KL but not exc 50 KL incl pumping by mechanical, including draining out & removal of sludge out of MoD land by means of covered tank including complete removal of all scale and dirt etc from tank surface and repairs req if any complete all as specified and as directed. |
| 113 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solventcement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender