Tender For Certain Repair To Sunken Portion, Flooring, Plastering, Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair To Otm Bldgs At 2003 Stn And Certain Repair To Roof Treatment And Assoicated Works In Certain Bldgs In Md And
Tender Value
47.82 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Sunken Portion, Flooring, Plastering, Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair To Otm Bldgs At 2003 Stn And Certain Repair To Roof Treatment And Assoicated Works In Certain Bldgs In Md And Otm Accn At 2003 Stn Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd. |
| 3 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. |
| 4 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. |
| 5 | M&L for 30 mm 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain , chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with wire mesh fitted all as specified and directed |
| 6 | M&L for 30 mm thick flush shutter solid core construction with block board and plywood panels commercial type on both side fitted to chowkats all as specified and directed |
| 7 | S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding with bolting/riveting /welding all as specified and direcetd |
| 8 | M&L preparing new wood and wood based material surfaces exc 10cm width or girth all as specified and directed |
| 9 | M&L for one coat of pink primer over wooden surface all as specified |
| 10 | M&L for one coat of synthetic enamel paint over wooden surface all as specified. |
| 11 | M&L for subsequent coat of synthetic enamel paint over first coat all as specified and directed |
| 12 | M&L for factory made powder coated anodised aluminium section for frame for door, window and ventilator complete all as specified. |
| 13 | M&L for factory made Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 14 | M&L for factory made powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer -in-charge. |
| 15 | S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.) |
| 16 | M&L for applying frosted glass film over window/ door glass as directed |
| 17 | S&F 125 mm long SS steel Butt hinges, medium weight, cold rolled and fixed all as specified. |
| 18 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 19 | S&F in aluminium tower bolts 200 mm, stove enamelled black, with bright bolt and fixed all as spcified and directed |
| 20 | S&F 150 mm size Aluminium handles, oval type, stove enamelled black, ISI marked all as specified. |
| 21 | Supply & fix factory made solid panel moulded PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and directed. |
| 22 | S & F Factory Made Solid PVC Moulded Door Shutter , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame all as specified and directed |
| 23 | S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directeed |
| 24 | Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles all as specified and dierected |
| 25 | Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed |
| 26 | M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) and as directed. |
| 27 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 28 | M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 29 | Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed. |
| 30 | M&L Rendering 15 mm thick cement plaster on fair faces of stone masonry or brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed (Note : edge/face of the chajjas, where damaged, shall be repaired and is included in this item.) |
| 31 | M&L for Rough cast plaster in shaft area upto two storey bldg over old plasteres surface of brick walls size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even completed all as specified & directed by Engr-in-charge. |
| 32 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed |
| 33 | M&L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 34 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed. |
| 35 | M&L for applying one coat of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed |
| 36 | M&L for applying subsequent coat of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed |
| 37 | M&L for preparation of old plastered surface complete all as specified & directed. |
| 38 | M&L for applying 2mm thick wall care putty and making the surface smooth as specified & directed. |
| 39 | M&L for applying a coat of oil emulsion distemper complete all as specified & directed. |
| 40 | M&L applying subsequent coat of oil emulsion distemper complete all as specified & directed. |
| 41 | M&L preparation of old plastered surface in ceiling complete all as spd and directed. |
| 42 | M&L for applying 3 mm thick wall care putty in ceiling complete all as spd and directed. |
| 43 | M&L two coats of white wash on surface of ceiling complete all as spd and directed. |
| 44 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed. |
| 45 | M&L for Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and smooth complete all as specified |
| 46 | M&L for 75 mm thick PCC ,type D-2 1:4:8 (20 mm graded aggregate) in flooring cmplete all as specified and directed. |
| 47 | M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris from the premises all as specified and directed |
| 48 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tiles including 15mm screed bed or bedding layer CM 1 : 6 all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 10 mm thick rendering CM 1 : 4 all as specified and directed. |
| 50 | M & L glazed coloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick or set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 51 | M&L for 100/125 mm square CP grating fixing in bathroom floor as in for basin as dircetedq |
| 52 | M&L Factory Made Machine Pressed color rubberised Pre-cast Concrete Coloured 60mm thick of M-35 Grade, Interlocking Paver Blocks with Spikes Marks on Top Surface, of any Shape and Size, conforming to IS:15658-2006 with Grey Cement and Pigment. |
| 53 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified & directed. |
| 54 | M&L 16-18 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including Roughening surfaces of old/new concrete floor/wall by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed. |
| 55 | M&Lfor Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves all as specified and dircted. |
| 56 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 57 | M&L cutting chases pinning in brick mass and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth all as specified and dierected |
| 58 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 59 | S&F 20 mm outer dia bore CPVC tubes with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 60 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 61 | S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as spd and directed. |
| 62 | S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread ,all as spd and directed |
| 63 | S&F in repair PVC waste pipe 32 mm dia for 32 mm full thread for wash basin and urinal as specified |
| 64 | S&F in repair PVC waste pipe 40 mm dia for 40 mm full thread for kitchen sink as specified |
| 65 | S&F in repair 15mm bore pillar cock fancy type chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed. |
| 66 | S&F in repair 15mm bore pillar cock long thread chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed. |
| 67 | S&F 5.5 mm thick mirror(600 x 450 mm size minimum) with moulded edge with chromium plated brass screws on each corner or as required and cup washers all as spd. |
| 68 | S&F in repair Vitreous china squatting pan (orissa pattern) size 580 X 440 mm, white, complete including fixing to trap, pan including all joints and making good the floor complete all as specified and as directed. |
| 69 | S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 70 | S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 71 | M & L for false ceiling work of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended fromsoffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the ntermediate channel with connecting clips across the intermediate channel at 600 mm centre to centre. ( Note : Ht may vary upto 12.0 m) |
| 72 | M & L for hanging of GI. false ceiling grid with 3 mm dia GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified. |
| 73 | M & L Non asbestos fibre cement building boards 6 mm thick (one side embosed design), fixed or laid/ inserted to GI grid frame work in ceiling with clips all as specified and directed. |
| 74 | M&L for PVC false ceiling consisting of premium PVC panels, Framework(GI/Alm.) including mains ection and perimeter channels , Lighting fixtures all as specified and approved by Engineer-In-Charge |
| 75 | S&F PVC wall Lining/panelling consisting of 4 to 5mm thick hollow type, single side prelam PVC sheet used instead of plain colour sheet fix to wall with screws incl matching PVC beading all as per specified and directed by Engr -in -Charge. |
| 76 | M&L PVC hollow Flutted Panel / WPC Louvers 16 to 18mm thick wood grain teak finished prelaminated inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site on wall / ceiling complete all as specified and directed |
| 77 | Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed. |
| 78 | Dismantling water tanks of any capacity and removing to store complete all as specified and directed |
| 79 | M&L for Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed. |
| 80 | M&L for 15 mm dia Nipple suitable for HDPE water tank of any capacity |
| 81 | M&L for 20 mm dia Nipple suitable for HDPE water tank of any capacity |
| 82 | S&F in repair 15 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15 mm bore all as specified and directed. |
| 83 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed |
| 84 | S&F in repair stop valves/angle valves brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 85 | S&F in repair 100mm PVC soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints including any type of fittings( as in bedn, elbow etc) all as specified. |
| 86 | M&L for CI floor trap 100 mm with square grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified. |
| 87 | M&L for Sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide or corner shelf of dia 25 cm min. with chromium plated bracket guard and railing complete all as specified and directed |
| 88 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm padding as roof/subbase , surface finished even and smooth in slope if required without using extra cement |
| 89 | Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a out of MOD land all as specified and directed |
| 90 | 15mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement |
| 91 | M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company |
| 92 | M&L for Applying Each coat of aluminium paint / waterproof paint paint as directed by Engr-In-Charge |
| 93 | Supply only liquid water proofing compound |
| 94 | S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.(Note : Ht is upto two storey building.) |
| 95 | Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a out of MOD land all as specified and directed |
| 96 | 15mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement |
| 97 | M&L for PCC 1: 2 :4 Type B-1 (using 12.5 mm graded stone aggregate) as in padding over roof slab laid to slope finished even and smooth, roof kerbs or mud stops, rounded or chamfered on edges, side coping of sheets complete all as specified and directed. (Note : Rates are included upto G+2 Storey) |
| 98 | M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company |
| 99 | M&L for Applying Each coat of aluminium paint / waterproof paint paint as directed by Engr-In-Charge |
| 100 | Supply only liquid water proofing compound |
| 101 | M&L for 2 mm thick coloured acrylic sheet with building number or name printed over it and fixing with nails/screwson building upto G+2 storey of desired size, pattern & colour as directed by Engr-In-Charge complete all as specified and directed.( Note : rates of printing, writting im the sheet deemed to be included in the rate) (Note : Ht is upto two storey building.) |
| 102 | Removing building materials etc. to a distance exc 1000 m and outside the MOD land beyond the lead included in the rates, including loading, unloading and stacking at the destination Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender