Tender For Certain Repairs To Sunken Portions,Flooring, Plastering, Joinery,Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair Works To Bldg In Block No From 01 To 09 At Tejas Enclave At Afssr Gurgaon Under Age B/R (A/F) Gurgao
Tender Value
49.96 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
18 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Sunken Portions,Flooring, Plastering, Joinery,Sanitary Fittings, Periodicals And Internal Water Supply Incl Misc Repair Works To Bldg In Block No From 01 To 09 At Tejas Enclave At Afssr Gurgaon Under Age B/R (A/F) Gurgaon Of Ge A/F Gurgaon & Certain Repairs To Strom Drain And Repair, Replacement, Cleaning Of Sewage Line, Manhole, Septic Tank, Soakage Well Etc Nts & Gurugrambhag Under Ge Af Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down PVC (SWR) pipes of any description with fitting and making good to disterbed surfaces.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 2 | S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls/floor with dash through nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 3 | S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls/floor including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 4 | S&F 110mm bore PVC (SWR) bends any radius With access door complete all as specified and directed by Engineer-in-charge. |
| 5 | S&F PVC(SWR) single equal branch pieces 110 mm bore \\"T\\" type with oval access doors complete all as specified and as directed by Engineer-in-Charge. |
| 6 | S&F PVC(SWR) single equal branch pieces 110 mm bore \\"Y\\" equal or unequal with access door complete all as specified and as directed |
| 7 | S&F 75mm bore PVC (SWR) bends any radius With access door complete all as specified and as directed |
| 8 | S&F PVC(SWR) single equal branch pieces 75 mm bore \\"T\\" type with oval access doors complete all as specified and as directed by Engineer-in-Charge. |
| 9 | S&F 75mm bore( SWR) vent cowl complete all as specified and as directed |
| 10 | S&F 60 mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls/floor including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and directed by Engineer-in-charge.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 11 | S&F 60 mm bore PVC (SWR) bends any radius With access door complete all as specified and as directed |
| 12 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 13 | Taking up or down Steel Tubing 50mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 14 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone,concrete wall and slabs |
| 15 | Supplying and laying of CPVC pipes 16 mm dia of outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all fittings and its connection to GI/PPR pipe as required complete all as specified and directed |
| 16 | S&F 50 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls/floor including cutting through wall, floors, etc and their making good, complete all as specified and direced. |
| 17 | S&F 50 mm bore dia 'UNION' of galvanized steel tubes medium grade laid concealed in walls/floor including cutting through wall, floors,pipe etc and their making good, complete all as specified and direced. |
| 18 | S&F 50 mm bore dia 'TEE' of galvanized steel tubes medium grade laid concealed in walls/floor including cutting through wall, floors,pipe etc and their making good, complete all as specified and direced. |
| 19 | Easing and adjusting steel door frame and shutters including taking down shutter and refixing after necessary repair works complete all as specified and directed. |
| 20 | M&L for Welding in repairs n.exc 5 cm in length, any thickneess of metal to be welded for repair to doors, windows, railing etc complete all as specified and directed. |
| 21 | Dismantling mild steel work of any description not otherwise complete all as specified and as directed by Engr-in-charge. |
| 22 | S&F in repair Framed work with steel Gde Fe-410-O or Fe-310-O as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed. |
| 23 | S&F in repair of Butt hinges of size 125mm , heavy weight, cold rolled mild steel, and fixed and complete all as specified and directed |
| 24 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire stapel etc complete all as secified and as directed. |
| 25 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire stapel etc on existing iron mesh doors complete all as secified and as directed. |
| 26 | M&L two coats of synthetic enamel painting over a Priming coat of Red oxide Zinc chrome on New steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces. |
| 27 | M&L One coats of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces. |
| 28 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed |
| 29 | Taking down Chowkats or frames from the opening of size n exc 1.5 Sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 30 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqm but not exc 4 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed. |
| 31 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed |
| 32 | S&F of powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 33 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 34 | S&F plain Sheet glass 4.8mm thick plain or tinted,fixed to aluminium doors/windows/ventilators complete all as specified and directed.(Note: Beading/rubber packing is included in the rates for aluminium section above) |
| 35 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be include in the quoted lum sum). →Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 36 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be included in the lumpsum quoted by the contractor. |
| 37 | S&F pressed steel frames 1.25mm thick for door size of frame105 X 60mm with single rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 38 | S&F pressed steel frames 1.25mm thick for door size of frame195 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 39 | M&L for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkats complete all as specified and as directed. |
| 40 | S&F 2nd class hard wood Glazed/skeleton shutters, 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed |
| 41 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 42 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing complete all as specified as directed. |
| 43 | S & F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing omplete all as specified as directed. |
| 44 | S&F magnetic door catches of stainless steel body used in cabinet doors with striking plate including letting in complete all as specified and directed by Engineer-In- Charge. |
| 45 | M& L stainless steel , 300 mm sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with including a minm 6 bolt and nuts four on bolt plate and two on staple plate and fixed. |
| 46 | Providing and fixing bright finished stainless steel tower bolts 300x10mm (barrel type) with necessary screws etc. complete : |
| 47 | Providing and fixing bright finished extruded stainless steel handle 125 mm with screws etc.complete |
| 48 | Providing and fixing 150 mm bright finished floor aluminium alloy door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 49 | S&F stainless steel butt hinges medium weight cold rolled 100mm size complete all as specified and as directed. |
| 50 | Demolition of Cement Concrete in sunken/ground floors and pavings exc 15 cm thickness above or below ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. |
| 51 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:3 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and directed |
| 52 | Supply only integral water proofing compound. |
| 53 | M&L for applying evenly a coat of epoxy compound of Dr Fixit or equalvent as approved by Engrineer-In-Charge as in sunken portion of WC including cleaning surfaces complete all as specified and as directed |
| 54 | M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in sunken slab, filling and mass concrete complete all as specified and directed |
| 55 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and directed |
| 56 | M& L 25mm thick Cement concrete type B-1,1:2:4 (20 mm graded aggregate) complete all as specified and directed. |
| 57 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 58 | M&L 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed. |
| 59 | M&L 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed. |
| 60 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 61 | M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 62 | M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over complete all as specified and as directed. |
| 63 | M&L for Green marble 18-20 mm thick (of any type) work(table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 64 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-In- Charge. |
| 65 | M&L for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as directed |
| 66 | M& L Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including scred bed of 20 mm in CM 1:6 |
| 67 | M& L pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed 15mm thick rendering in CM 1:4 all as specified and as directed. |
| 68 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. |
| 69 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed.Note:- Area includes in this items upto 6 stories of building. |
| 70 | M&L for rendering 10 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed |
| 71 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 72 | M&L for preparing new plastered surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. |
| 73 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. |
| 74 | M&L preparing newly Plastered surfaces of Walls and apply Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed. |
| 75 | M&L preparing old Distempered surfaces of ceiling by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying one coat of oil bond distemper white or any tint complete all as specified and directed.Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost.ite or any tint etc complete as specified and directed |
| 76 | M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying One coat of oil emulsion distemper white or any tint etc complete as specified and directed Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. Please Enable Macros to View BoQ information |
| 77 | M&L for preparing Old plastered surface of walls and Scrapping down by Mechenically and applying One coat of oil emulsion distemper white or any tint etc complete as specified and directed Note:- Complete cleaning of the rooms and window with glass pane, due to stained of painting.b) If furniture is stained with paint, all can be cleaned is wholly responsiblity of contractor without any cost. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender