Tender For Repair / Maintenance Of Hv / Lv Electrcal System, Day To Day Complaints And Improvement Of Mes Installations And Connected Works At Sec A, Dablan & Barsat Under Ge (North) Patiala.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
1 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Hv / Lv Electrcal System, Day To Day Complaints And Improvement Of Mes Installations And Connected Works At Sec A, Dablan & Barsat Under Ge (North) Patiala.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, fixing, including commissioning of 16M high mast 360/150--3/3 shaft in two section suitable for 47 m/sec wind speed along with head frame, luminaires carriage suitable for 6-9 luminaires in symmetrical arrangement and other accessories manufactured in factory. Supply of raising lowering system comprising double drum winch, 4mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (a) Supply and fix foundation bolts along with nuts, washers, anchor plate and common template.(b) Supply and fix LED type single dome aviation obstruction light.(c) Supply and fix outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.Complete all as specified and as directed.Make:- Bajaj/Utkarsh/Jindal power corporation . |
| 2 | Supply, installing,commissioning and testing 100 Watt Solar AIO LED Street Light with luminair efficacy of 150 lm/W with minimum lumen output of 15000 lumens.The solar panel should be of 150W with Monocrystalline cells with 78Ah LiFePO4 battery pack. Manufacturers Logo/name must be engraved/Embossed on luminaire Housing. Manufacturer must have In-House NABL accredited laboratory with scope of testing & callibration of Electrical, Mechanical & Photometry Parameters as per IS10322:2012, IS16104, IS16106, IEC60598-1, IEC62262:2002, IEC60068-2-75, IEC60529, IES LM79, IS16102 (Part 2, Clause 8).Solar light fitting should be reliable to fit on 410 SP-31 9.00 meter long steel tubular pole complete all specified and as directed by Engineer-in-charge.Notes:- The bidder shall submitt the following documents alongwith sample for approval of sample by GE (1) LM79 Report from NABL Accredited Lab of Light supplied.(2) Technical Data Sheet of Solar Street Light.(3) Type Test Report of Solar Street Light.(4) BIS Certificate of Battery.(5) LM80 Report of LED Chip used in fixture.(6) Data Sheet of LED Chip used in fixture. |
| 3 | Material and labour for earthing complete with galvanised steel earth Coil of 50 mm dia have 115 turns, burried directly in to ground ( earth pit size should be 1500mm X 600mm + size of coil) not less than 1500 mm + Coil Size deep below GL with top edge of earth coil not less than 1500mm below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 600mm all around the coil, connected to GI lead wire of 4 mm dia (1.75 m Long) by means of nuts, bolts and washers, checknuts of GI and distance of the earthing bore from the pole should be 1200mm Minimum complete all specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 4 | Material and labour for earthing complete with galvanised steel earth Coil of 50 mm dia have 115 turns, burried directly in to ground ( earth pit size should be 1500mm X 600mm + size of coil) not less than 1500 mm + Coil Size deep below GL with top edge of earth coil not less than 1500mm below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 600mm all around the coil, connected to GI lead wire of 4 mm dia (1.75 m Long) by means of nuts, bolts and washers, checknuts of GI and distance of the earthing bore from the pole should be 1200mm Minimum complete all specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender