Tender For Certain Repair To Wooden Furniture In Ge (East) Ferozepur Cantt
Tender Value
48 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Wooden Furniture In Ge (East) Ferozepur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | S&F in replacement/repairs the following unserviceable parts of Bed plywood top including taking out old unserviceable parts complete all as specified and as directed. (Drg No. FD - 246,247) for the following :-(i) Long leg made out of first class teakwood. |
| 2 | ditto all as per item No 1.00 above but for Short leg made out of first class teakwood. |
| 3 | ditto all as per item No 1.00 above but for Long rail made out of first class teakwood. |
| 4 | ditto all as per item No 1.00 above but for Stiffener made out of Second class hard wood. |
| 5 | ditto all as per item No 1.00 above but for Top of head rest made out of first class teakwood. |
| 6 | ditto all as per item No 1.00 above but for Bottom of head rest made out of first class teakwood. |
| 7 | ditto all as per item No 1.00 above but for Top of foot rest made out of first class teakwood. |
| 8 | ditto all as per item No 1.00 above but for Bottom of foot rest made out of first class teakwood. |
| 9 | ditto all as per item No 1.00 above but for Complete head rest with 3.5mm thick OSTF plywood. |
| 10 | ditto all as per item No 1.00 above but for 3.5mm thick teak face plywood, including half round teakwood beading if broken, of both side of head rest complete. |
| 11 | ditto all as per item No 1.00 above but for Complete foot rest with 3.5mm thick OSTF plywood. |
| 12 | ditto all as per item No 1.00 above but for 3.5mm thick teak face plywood, including half round teakwood beading if broken, of both side of foot rest complete. |
| 13 | ditto all as per item No 1.00 above but for Plywood 12mm thick (9 ply) BWR grade of suitable size in single piece as per shown in drg. |
| 14 | ditto all as per item No 1.00 above but for wood triangular support of teak wood with full thread black screws. |
| 15 | S&F in replacement/repairs the following unserviceable parts of Table bed side including taking out old unserviceable parts complete all as specified and as directed. (Drg No. FD - 276) for the following :-(i) New Top/Bottom of Table Bed Side, made of 18 mm thick prelaminated particle board of teak shade including 4 mm thick Teak wood beading in front. Rest all shown on drg and directed by Engineer-in-Charge |
| 16 | ditto all as per item No 15.00 above but for side portion of Table Bed Side made of prelaminated particle board teak face with 4 mm Teak wood beading in front. Rest all shown on drg and directed by Engineer-in-Charge |
| 17 | ditto all as per item No 15.00 above but for shelf of Table Bed Side, made of 18mm thick prelaminated particle board teak face with 4 mm Teak wood beading in front . Rest all shown on drg and directed by Engineer-in-Charge |
| 18 | ditto all as per item No 15.00 above but for taking down unsv plywood from back of table bed side and S&F new plywood 6mm thick BWR gde ISI Marked to back side of table bed side. Rest all shown on drg and directed by Engineer-in-Charge |
| 19 | S&F in replacement/repairs the following unserviceable parts of Chair wooden bottom including taking out old unserviceable parts complete all as specified and as directed. (Drg No. FD - 285) for the following :-(i) Front leg made out of first class teakwood. |
| 20 | ditto all as per item No 19.00 above but for Rear leg made out of first class teakwood. |
| 21 | ditto all as per item No 19.00 above but for Front/rear rail made out of first class teakwood. |
| 22 | ditto all as per item No 19.00 above but for Side/back rail made out of first class teakwwood. |
| 23 | ditto all as per item No 19.00 above but for Stiffener made out of fists class teak wood. |
| 24 | ditto all as per item No 19.00 above but for wood tringular support of teak wood with full thread black screws. |
| 25 | ditto all as per item No 19.00 above but for new Seat, made of 06mm thick plywood BWR grade ISI marked. Rest all as per shown on drg and directed. |
| 26 | S&F in replacement/repairs the following unserviceable parts of Table 900mm x 600mm without drawer including taking out old unserviceable parts complete all as specified and as directed. (Drg No FD - 284)(i) Top made out of 18mm thick pre-laminated particle board (exterior grade) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 27 | ditto all as per item No 26.00 above but for Leg made out of first class teakwood. |
| 28 | ditto all as per item No 26.00 above but for Front/rear rail made out of first class teakwood. |
| 29 | ditto all as per item No 26.00 above but for Side rail made out of first class teakwood. |
| 30 | ditto all as per item No 26.00 above but for Lower rail made out of first class teakwood. |
| 31 | ditto all as per item No 26.00 above but for wood tringular support of teak wood with full thread black screws. |
| 32 | ditto all as per item No 26.00 above but for PVC shoes 20mm dia of approved quality. |
| 33 | S&F in replacement/repairs the following unserviceable parts of Table 900mm x 600mm with drawer including taking out old unserviceable parts complete all as specified and as directed . (Drg No FD - 283)(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 34 | ditto all as per item No 33.00 above but for Leg made out of first class teakwood. |
| 35 | ditto all as per item No 33.00 above but for Front/side rail made out of first class teakwood. |
| 36 | ditto all as per item No 33.00 above but for Lower rail made out of first class teakwood. |
| 37 | ditto all as per item No 33.00 above but for S&F wood tringular support of teak wood with full thread black screws. |
| 38 | ditto all as per item No 33.00 above but for Back rail made out of first class teakwood. |
| 39 | ditto all as per item No 33.00 above but for Drawer complete excluding knob. |
| 40 | ditto all as per item No 33.00 above but for Front drawer made out of 18mm thick prelaminated particle board and 4x18mm teakwood beading complete excluding knob. |
| 41 | ditto all as per item No 33.00 above but for Bottom of drawer made out of plywood 6mm thick BWR grade complete. |
| 42 | ditto all as per item No 33.00 above but for Side/Back of drawer made out of 12mm thick BWR grade complete. |
| 43 | ditto all as per item No 33.00 above but for PVC shoes 20mm dia of approve quality. |
| 44 | S&F in replacement/repairs the following unserviceable parts of Table centre including taking out old unserviceable parts complete all as specified and as directed .(Drg No FD - 274)(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 45 | ditto all as per item No 44.00 above but for Leg made out of first class teakwood. |
| 46 | ditto all as per item No 44.00 above but for Front rail made out of first class teakwood. |
| 47 | ditto all as per item No 44.00 above but for Side rail ade out of first class teakwood. |
| 48 | ditto all as per item No 44.00 above but for Bottom rail made out of first class teakwood. |
| 49 | ditto all as per item No 44.00 above but for wood tringular support of teak wood with full thread black screws. |
| 50 | ditto all as per item No 44.00 above but for PVC shoes 20mm dia of approve quality. |
| 51 | S&F in replacement/repairs the following unserviceable parts of Teapoy including taking out old unserviceable parts complete all as specified and as directed (Drg No FD - 382).(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 52 | ditto all as per item No 51.00 above but for Leg made out of first class teakwood. |
| 53 | ditto all as per item No 51.00 above but for Front rail made out of first class teakwood. |
| 54 | ditto all as per item No 7.00 above but for Side rail made out of first class teakwood. |
| 55 | ditto all as per item No 51.00 above but for Bottom rail made out of first class teakwood. |
| 56 | ditto all as per item No 51.00 above but for wood tringular support of teak wood with full thread black screws. |
| 57 | ditto all as per item No 51.00 above but for PVC shoes 20mm dia of approve quality. |
| 58 | S&F in replacement/repairs the following unserviceable parts of Table writing including taking out old unserviceable parts complete all as specified and as directed . (Drg No FD - 275).(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 59 | ditto all as per item No 58.00 above but for Leg made out of first class teakwood complete. |
| 60 | ditto all as per item No 58.00 above but for Front rail made of first class teakwood complete. |
| 61 | ditto all as per item No 58.00 above but for Side rail made of first class teakwood complete. |
| 62 | ditto all as per item No 58.00 above but for Side stiffener made of first class teakwood complete |
| 63 | ditto all as per item No 58.00 above but for Centre stiffener made of first class teakwood complete. |
| 64 | ditto all as per item No 58.00 above but for side of cabinet complete. |
| 65 | ditto all as per item No 58.00 above but for Bottom of cabinet complete. |
| 66 | ditto all as per item No 58.00 above but for Shutter of cabinet complete. |
| 67 | ditto all as per item No 58.00 above but for Back of cabinet made out of plywood 6mm thick BWR grade. |
| 68 | ditto all as per item No 58.00 above but for Shelf of cabinet made out of plywood 12mm thick BWR grade complete. |
| 69 | ditto all as per item No 58.00 above but for Drawer complete excluding knob. |
| 70 | ditto all as per item No 58.00 above but for Front drawer made out of 18mm thick prelaminated particle board and 4x18mm teakwood beading complete excluding knob. |
| 71 | ditto all as per item No 58.00 above but for Bottom of drawer made out of plywood 6mm thick BWR grade complete. |
| 72 | ditto all as per item No 58.00 above but for Side/Back of drawer made out of 12mm thick (9 Ply) BWR grade complete. |
| 73 | ditto all as per item No 58.00 above but for Wood tringular support of teak wood with full thread black screws. |
| 74 | S&F in replacement/repairs the following unserviceable parts of Table dining 6 persons including taking out old unserviceable parts complete all as specified and as directed . (Drg No. FD/MAP-II/03, 273).(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 75 | ditto all as per item No 74.00 above but for Leg made out of first class teakwood. |
| 76 | ditto all as per item No 74.00 above but for Front rail made out of first class teakwood. |
| 77 | ditto all as per item No 74.00 above but for Side rail made out of first class teakwood. |
| 78 | ditto all as per item No 74.00 above but for Stiffener made out of 2nd class hard wood. |
| 79 | ditto all as per item No 74.00 above but for wood tringular support of teak wood with full thread black screws. |
| 80 | S&F in replacement/repairs the following unserviceable parts of Chair Easy including taking out old unserviceable parts complete all as specified and as directed. (Drg No. FD-229).(i) Leg made out of first class teakwood. |
| 81 | ditto all as per item No 80.00 above but for Frame front/back made out of first class teakwood. |
| 82 | ditto all as per item No 80.00 above but for Frame side of seat made out of first class teakwood. |
| 83 | ditto all as per item No 80.00 above but for Frame top/bottom made out of first class teakwood. |
| 84 | ditto all as per item No 80.00 above but for Frame side of back made out of first class teakwood. |
| 85 | ditto all as per item No 80.00 above but for Arm made out of first class teakwood. |
| 86 | ditto all as per item No 80.00 above but for Rail made out of first class teakwood. |
| 87 | ditto all as per item No 80.00 above but for PVC shoe 15mm dia of approved quality. |
| 88 | M&L for weaving seat and back with new cane of 2 to 2.5mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane, complete all as specified and as directed. |
| 89 | S&F in replacement/repairs the following unserviceable parts of Chair Dining/Chair Dining PVC Seat including taking out old unserviceable parts complete all as specified and as directed .(Drg No. FD-279,FD/MAP-II/05).(i) Front leg made out of first class teakwood. |
| 90 | ditto all as per item No 89.00 above but for Rear leg made out of first class teakwood. |
| 91 | ditto all as per item No 89.00 above but for Stiffener made out of first class hard wood. |
| 92 | ditto all as per item No 89.00 above but for Back rest made out of first class teakwood. |
| 93 | ditto all as per item No 89.00 above but for Rail made out of first class teak wood. |
| 94 | ditto all as per item No 89.00 above but for wood tringular support of teak wood with full thread black screws. |
| 95 | ditto all as per item No 89.00 above but for PVC shoe 15mm dia of approved quality. |
| 96 | M&L for weaving with new cane of 2 to 2.5mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane, complete all as specified and as directed. |
| 97 | M&L for PVC seat 4x10mm thick RIBS moulded alongwith seat in a single piece of approved quality, complete all as specified and as directed. |
| 98 | S&F in replacement/repairs the following unserviceable parts of Chair Writing including taking out old unserviceable parts complete all as specified and as directed.(Drg No. FD-280).(i) Front leg made out of first class teakwood. |
| 99 | ditto all as per item No 98.00 above but for Rear leg made out of first class teakwood. |
| 100 | ditto all as per item No 98.00 above but for Arm made out of first class teakwood. |
| 101 | ditto all as per item No 98.00 above but for Stiffener made out of first class hard wood. |
| 102 | ditto all as per item No 98.00 above but for Back rest made out of first class teakwood. |
| 103 | ditto all as per item No 98.00 above but for Rail made out of first class teak wood. |
| 104 | ditto all as per item No 98.00 above but for S&F wood tringular support of teak wood with full thread black screws. |
| 105 | ditto all as per item No 98.00 above but for PVC shoe 15mm dia of approved quality. |
| 106 | M&L for weaving with new cane of 2 to 2.5mm mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane, complete all as specified and as directed. |
| 107 | S&F in replacement/repairs the following unserviceable parts of Table dining 4 persons including taking out old unserviceable parts complete all as specified and as directed. (Drg No.FD-273, FD/MAP-II/03).(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 108 | ditto all as per item No 107.00 above but for Leg made out of first class teakwood. |
| 109 | ditto all as per item No 107.00 above but for Front/Rear rail made out of first class teakwood. |
| 110 | ditto all as per item No 107.00 above but for Side rail ade out of first class teakwood. |
| 111 | ditto all as per item No 107.00 above but for Stiffener made out of 2nd class hard wood. |
| 112 | ditto all as per item No 107.00 above but for wood tringular support of teak wood with full thread black screws. |
| 113 | S&F in replacement/repairs the following unserviceable parts of Table Peg including taking out old unserviceable parts complete all as specified and as directed. (Drg No. FD-277).(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 114 | ditto all as per item No 113.00 above but for Leg made out of first class teakwood. |
| 115 | ditto all as per item No 113.00 above but for Front rail made out of first class teakwood. |
| 116 | ditto all as per item No 113.00 above but for Bottom rail made out of first class teakwood. |
| 117 | ditto all as per item No 113.00 above but for S&F wood tringular support of teak wood with full thread black screws. |
| 118 | ditto all as per item No 113.00 above but for PVC shoes 15mm dia of approve quality. |
| 119 | S&F in replacement/repairs the following unserviceable parts of Table dressing ladies with mirror MAP including taking out old unserviceable parts complete all as specified and as directed .(Drg No. FD/MAP-II/07)(i) Top of cabinet made out of 18mm thick prelaminated particle board exterior quality with teak wood beading in front of centre portion. Rest all as per shown on drawing and complete all as specified and as directed by Engineer-in-charge. |
| 120 | ditto all as per item No 119.00 above but for Side of cabinet made out of 18mm thick prelaminated particle board |
| 121 | ditto all as per item No 119.00 above but for Bottom of cabinet made out of 18mm thick prelaminated particle board |
| 122 | ditto all as per item No 119.00 above but for Shutter of cabinet made out of 18mm thick prelaminated particle board with SS Hinges. |
| 123 | ditto all as per item No 119.00 above but for Back portion complete made out of 18mm thick PLPB. |
| 124 | ditto all as per item No 119.00 above but for Looking mirror 5mm thick alongwith frame as per shown on drawing complete all as specified and as directed by Engineer-in-charge. |
| 125 | ditto all as per item No 119.00 above but for Drawer made out of 18mm thick prelaminated particle board with 1 Set telescopic channel complete. |
| 126 | ditto all as per item No 119.00 above but for megnatic catcher to TDL of approved quality. |
| 127 | ditto all as per item No 119.00 above but for Removing old foam cushion from stool dressing and supply and fixing new foam chusion on stool dressing 75mm thick of suitable size of 40 density covered with tapestry cloth of approved quality. Note :- cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr. |
| 128 | S&F in replacement/repairs the following unserviceable parts of Table dressing ladies with mirror including taking out old unserviceable parts complete all as specified and as directed . (Drg No. FD-251 & 378)(i) Top made out of 18mm thick prelaminated particle board exterior quality with teak wood beading in front . Rest all as per shown on drawing and complete all as specified and as directed by Engineer-in-charge. |
| 129 | ditto all as per item No 128.00 above but for Sliding glass 5mm thick. |
| 130 | ditto all as per item No 128.00 above but for Decorative knob 32mm dia of approved quality. |
| 131 | ditto all as per item No 128.00 above but for Back portion complete made out of 12mm thick plywood BWR gde. |
| 132 | ditto all as per item No 128.00 above but for Looking mirror 366mm x 1220mm, 5mm thick alongwith frame as per shown on drawing complete all as specified and as directed by Engineer-in-charge. |
| 133 | ditto all as per item No 128.00 above but for Leg with frame complete made out of first class teakwood. |
| 134 | S&F in replacement/repairs the following unserviceable parts of Table 900mm x900mm without drawer including taking out old unserviceable parts complete all as specified and as directed (Drg No FD-291)(i) Top made out of 18mm thick pre-laminated particle board (exterior gde) one side teak face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per drawings and directed by Engr-in-Charge. |
| 135 | ditto all as per item No 134.00 above but for Leg made out of first class teakwood. |
| 136 | ditto all as per item No 134.00 above but for Rail made out of first class teakwood. |
| 137 | ditto all as per item No 134.00 above but for wood tringular support of teak wood with full thread black screws. |
| 138 | ditto all as per item No 134.00 above but for PVC shoes 25mm dia of approve quality. |
| 139 | S&F in replacement/repairs the following unserviceable parts of Table dressing Gents with mirror including taking out old unserviceable parts complete all as specified and as directed (Drg No. FD-230,379).(i) Top/Bottom made of 18mm thick prelaminated partical board exterior quatily teak shade one side all as per shown on drg and directed by Engineer -in - Charge. |
| 140 | ditto all as per item No 139.00 above but for Replacement of unserviceable /looking mirror 5mm thick alongwith frame and back ply all as per shown on drg and directed by Engineer -in - Charge. . Make of mirror modi Guard/Atul/Swastic |
| 141 | ditto all as per item No 139.00 above but for Removing old unsv drawer and decorative knob from table dressing gents with mirror and S&F new drawer with decorative knob of approved quality as directed by Engineer -in - Charge. |
| 142 | ditto all as per item No 139.00 above but for Replacement of back plywood with 12mm thick BWR plywood ISI Marked as directed by Engineer -in - Charge. |
| 143 | S&F in replacement/repairs the following unserviceable parts of Sofa set 5 seater including taking out old unserviceable parts complete all as specified and as directed .(Drg No. FD/MAP-II/02).(i) Leg made out of first class teakwood. |
| 144 | ditto all as per item No 143.00 above but for Arm made out of first class teakwood. |
| 145 | ditto all as per item No 143.00 above but for Side rail made out of first class teakwood. |
| 146 | ditto all as per item No 143.00 above but for Bottom stiffener made out of first class teakwood. |
| 147 | ditto all as per item No 143.00 above but for Front rail of single seater made of first class teakwood. |
| 148 | ditto all as per item No 143.00 above but for Front rail of three seater made of first class teakwood. |
| 149 | ditto all as per item No 143.00 above but for Back rest rail top/side of single seater made out of first class teak wood. |
| 150 | ditto all as per item No 143.00 above but for Back rest rail side of three seater made out of first class teak wood. |
| 151 | ditto all as per item No 143.00 above but for Back rest rail top of three seater made out of first class teak wood. |
| 152 | ditto all as per item No 143.00 above but for 12mm thick BWR plywood of Seat/Back of single seater. |
| 153 | ditto all as per item No 143.00 above but for 12mm thick BWR plywood of Seat/Back of three seater. |
| 154 | ditto all as per item No 143.00 above but for Removing old foam cushion with tapestry cloth from sofa set 5 seater and S&F new P.U. Foam cushion of size 21\\"x22\\"x4\\" (40mm density) duly covered with approved quality of tapestry cloth. Make of foam cushion :- Sleepwell (Feather Foam) / Kurl-on (Komfort universe goldine plus) / Corfom (Premium Foam). Note :- Cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr. |
| 155 | ditto all as per item No 143.00 above but for Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth of approved quality. Note :- cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr.( Drg No. FD-281,373,FD/MAP-II/02) |
| 156 | S&F in replacement/repairs the following unserviceable parts of Sofa set 5/4 seater including taking out old unserviceable parts complete all as specified and as directed.(Drg No. FD-373,281)(i) Leg made out of first class teakwood. |
| 157 | ditto all as per item No 156.00 above but for Arm made out of first class teakwood. |
| 158 | ditto all as per item No 156.00 above but for Side rail made out of first class teakwood. |
| 159 | ditto all as per item No 156.00 above but for Botten stiffener of single/three seater made out of first class teakwood. |
| 160 | ditto all as per item No 156.00 above but for Front rail of single seater made of first class teakwood. |
| 161 | ditto all as per item No 156.00 above but for Front rail of three seater made of first class teakwood. |
| 162 | ditto all as per item No 156.00 above but for Back rest rail top/side of single seater made out of first class teak wood. |
| 163 | ditto all as per item No 156.00 above but for Back rest rail side of three seater made out of first class teak wood. |
| 164 | ditto all as per item No 156.00 above but for Back rest rail top of Single seater made out of first class teak wood. |
| 165 | ditto all as per item No 156.00 above but for Wooden batten for single/three seater made out of first class teak wood |
| 166 | S&F in replacement/repairs the following unserviceable parts of Chair Dining Cushioned MAP including taking out old unserviceable parts complete all as specified and as directed ( Drg No FD/MAP-II/04)(i) Front leg made out of first class teakwood. |
| 167 | ditto all as per item No 166.00 above but for Rear leg made out of first class teakwood. |
| 168 | ditto all as per item No 166.00 above but for Rail made out of first class teakwood. |
| 169 | ditto all as per item No 166.00 above but for Stiffener made out of first class teak wood. |
| 170 | ditto all as per item No 166.00 above but for Vertical strip made out of first class teak wood. |
| 171 | ditto all as per item No 166.00 above but for Replacing only tapestry cloth on seat cushion.Note :- Cost of Tapestry cloth will be not less than Rs. 200/- meter, quality and colour as per directed by Engr-in-charge. |
| 172 | ditto all as per item No 166.00 above but for Replacing of foam 75mm and 40 density, Make of foam sleepwell (Feather Foam) / Kurl-on (Komfort universe goldline plus) / Corfom (Premium Foam) quality and colour approved by Engr-in-charge. |
| 173 | ditto all as per item No 166.00 above but for Replacing only plywood 12mm thick (9 ply) BWR gde. |
| 174 | ditto all as per item No 166.00 above but for S&F wood tringular support of teak wood with full thread black screws. |
| 175 | ditto all as per item No 166.00 above but for S&F PVC shoe 15mm dia of approved quality. |
| 176 | S&F in replacement/repairs the following unserviceable parts of Hat Stand With Mirror including taking out old unserviceable parts complete all as specified and as directed Drawing No (FD-233)(i) Replacement of unserviceable back Plywood 6mm thick BWR gde. |
| 177 | ditto all as per item No 176.00 above but for Replacement of unserviceable front ply wood 3.5 mm thick OSTF. |
| 178 | ditto all as per item No 176.00 above but for Replacement of unserviceable looking mirror of hat stand as per drg. |
| 179 | ditto all as per item No 176.00 above but for Replacement of unserviceable Aluminium pegs of size 120x75mm as directed by Engr-in-charge. |
| 180 | M&L to repairs Chair Easy Cushion by replacing the fwg unserviceable parts with teakwood and approved ones. Rest all as per drawings and directed by Engr-in-Charge. (Drg No. FD-229). (a) Leg made out of first class teakwood. |
| 181 | ditto all as per item No 180.00 but for replacing only tapestry cloth on seat and back of chair easy cushion. Note :- Cost of Tapestry cloth will be not less than Rs. 200/- meter, quality and colour as per directed by Engr-in-charge. |
| 182 | ditto all as per item No 180.00 but for replacing of foam 75mm and 40 density on seat and back of chair easy cushion, Make of foam sleepwell (Feather Foam) / Kurl-on (Komfort universe goldline plus) / Corfom (Premium Foam) quality and colour approved by Engr-in-charge. |
| 183 | ditto all as per item No 180.00 but for replacing only plywood 12mm thick (9 ply) BWR gde. |
| 184 | ditto all as per item No 180.00 but for replacing arm made out of first class teakwood. |
| 185 | S&F PVC shoe 15mm dia of approved quality, complete all as specified and as directed. |
| 186 | POLISHING TO WOODEN FURNITUREMaterial and labour for preparation of old wooden polished surface of Hat stand with mirror (FD-233), Cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Brunt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow dry, rubbing off surface with sand paper until smooth surface is achieved, wiping off the polish from other than wooden surfaces with polish thinner and appling frencj polish till high gloss finish is achieved complete all as specified and directed by Engr-in-charge. |
| 187 | ditto all as per item No 186.00 above but for Bed Hard Plywood top (Drg No. FD - 246) |
| 188 | ditto all as per item No 186.00 above but for Table bed side (Drg No. FD-276) |
| 189 | ditto all as per item No 186.00 above but for Chair Wooden Bottom (FD-285) |
| 190 | ditto all as per item No 186.00 above but for Table 900mmx600mm with /without drawer.(FD-284,283) |
| 191 | ditto all as per item No 186.00 above but for Table Centre.(FD-274) |
| 192 | ditto all as per item No 186.00 above but for Teapoy Wooden. (FD-382) |
| 193 | ditto all as per item No 186.00 above but for Table Writing. (FD-275) |
| 194 | ditto all as per item No 186.00 above but for Table dining 6 persons. (FD/MAP-II/03,273) |
| 195 | ditto all as per item No 186.00 above but for Table dining 4 persons. (FD/MAP-II/03,273) |
| 196 | ditto all as per item No 186.00 above but for Chair Easy. (FD-229) |
| 197 | ditto all as per item No 186.00 above but for Chair Dining/Chair Dining PVC Bottom. (FD-279,228,FD/MAP-II/05) |
| 198 | ditto all as per item No 186.00 above but forChair Writing. (FD-280) |
| 199 | ditto all as per item No 186.00 above but for Peg Table. (FD-277) |
| 200 | ditto all as per item No 186.00 above but for Table dressing ladies (FD/MAP-II/07) |
| 201 | ditto all as per item No 186.00 above but for Table dressing ladies(FD-251,378) |
| 202 | ditto all as per item No 186.00 above but for Table 900x900x760mm without drawer.(FD-291) |
| 203 | ditto all as per item No 186.00 above but for Table dressing gents with mirror (FD-230,379) |
| 204 | ditto all as per item No 186.00 above but for Book Case. |
| 205 | ditto all as per item No 186.00 above but for side board. |
| 206 | ditto all as per item No 186.00 above but for Sofa set 5 seater (Drg No. FD/MAP-II/02,281,373). |
| 207 | ditto all as per item No 186.00 above but forSofa set 4 seater (Drg No. FD-281,373) |
| 208 | ditto all as per item No 186.00 above but for Chair Dining cushioned MAP (Drg No.FD/MAP-II/04). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender