Tender For Repair / Replacement To Portal Frames, Rafters, Purlins And Truss, Ac Sheets, Galvalume Sheets, False Ceiling And Other Connected Works At Various Bldgs Of Workshops, Hangars, Tps, Mt Garages, Parking Sheds And Other Otm Accn Of installati
Tender Value
48 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
16 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement To Portal Frames, Rafters, Purlins And Truss, Ac Sheets, Galvalume Sheets, False Ceiling And Other Connected Works At Various Bldgs Of Workshops, Hangars, Tps, Mt Garages, Parking Sheds And Other Otm Accn Of installation Tunir Area Under Age B/R-Ii At Naval Station Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wrought iron or mild steel work of any description not otherwise provided incl doors, gates for complete all as specified and as directed |
| 2 | M&L for frame work such as grills, as an fencing posts, angle, gratings etc with ends of bar shouldred and / or revetied or forged into spikes , framed guard bars , barred iron doors, ladders, framed ballusters etc & similar work confarming to Fe-290 grade E1-65Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge. |
| 3 | M&L for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed. |
| 4 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E- 250) quality A, complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F of Bands, straps, supports or stays for rainwater, ventailing pipes, including bolts, if required hooks,heavy, for large gates, hook and pintle hinges; large hasps and stables; chains;hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde -165. complete all as specified and directed by Engineer-in-charge. |
| 6 | S&F framed work in doors or gates of angle or other section with gusset plates, rails, braces, holdfast etc, of grade Fe 410-W (Gde E-250) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed. |
| 7 | S&F premoulded cast iron gate of FE-150 confirming to IS ornamenta type in cast iron cum mild steel of 6.20 span, 3.0m to 4.065m in height two leaves and wicket gate in cast iron cum mild steel of 1.5m span, 2.1m height in single leaf, including necessary welding, pintol hinges, steel ball bearing plates and locking arragement complete all as specified and directed. Note:- (a) Frame of cast iron gate shall be mild steel pipe frame of size 50mm X 50mm x 4.5mm thick cconforming to grade Fe-410 or Fe-310. (b) RCC pillar/ brick pillar and painting to steel surface including all connected items shall be measured and paid seperately under relevant items. (c) Design as per directed by Engr-in-Charge. |
| 8 | S&F mild steel work hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, holdfast, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed. Note:- Rate shall be include upto 15 mtr height of bldg/ Hangers for scaffolding including all as arrangement. |
| 9 | M&L for mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A all complete all as specified and directed by Engr-in-Charge |
| 10 | M&L for welding in repair, exc 2.5 cm but n.exc 5 cm in length thickness of metal to be welded exc 20mm but n.exc 25mm complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for running welding in repair exceeding 20mm but not ecxceeding 25mm complete all as directed by Engr-in-Charge |
| 12 | M&L for painting to new steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic paint complete all as specified and directed by Engineer-in-Charge |
| 13 | M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for prepration of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 15 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-Charge |
| 16 | S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 17 | S&F of pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 18 | S&F of Pre- painted mangloure pattern galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 19 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc complete all as specified and directed by Engr-in-Charge |
| 20 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets etc. complete all as specified and directed by Engr-in-Charge |
| 21 | S&F of false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 12 mm thick ceiling board of RH-90. including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GE flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm x 25 mm angles complete all as per direction of Engr-in-charge, Manufacturer's specification & drawing. |
| 22 | S&F in repair 8 to 10mm thick armstorng ceiling board of RH -90 false ceiling consisting of 600mm x 600mm insert existing frame work without disterbing the other false ceiling and making good existing frame etc. complete all as specified and directed by Engr-in-Charge |
| 23 | S&F of PVC False ceiling consisting of 600 mm x 600 mm, 8-10mm thick prelaminated self design including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as per direction of Engr-in-charge, Manufacturer's specification & drawing. |
| 24 | S&F in repair 8 to 10mm thick PVC false ceiling consisting of 600mm x 600mm prelaminated self design insert existing frame work without disterbing the other false ceiling and making good existing frame etc. complete all as specified and directed by Engr-in-Charge |
| 25 | S&F in repair 4 mm thick plain asbestos cement board as in false ceiling with and applying two coats of oil bound distemper over a coat of chalk whitening and making good to existing frame without disturbing the other false ceiling complete all as specified and directed by Engr-in-Charge. Note:- Item rate shall be include any height of Bldgs for scafolding & all other arrangement. |
| 26 | S&F of Anodised aluminium snap grid of size 600x600 mm frame work for false ceiling complete all as specified and directed by Engr-in-Charge |
| 27 | S&F of Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 28 | S&F of 4 mm thick Non asbestos cement plain building board fixed to aluminium grid frame work in ceiling complete all as specified and directed by Engr-in-Charge. Note:- Item rate shall be include any height of Bldgs for scafolding and all other arrangement. |
| 29 | Taking down ceiling boards (fibre, plub, insulaiton boards, blankets any thickness and refixing in ceiling, flat or sloping as per existing pattern with timber, mild steel or aluminoum framed work grid and making to good existing frame without disturbing the other false ceiling complete all as directed by Engr-in-Charge. Note:- Item rate shall be include any height of Bldgs for scafolding & all arrangement. |
| 30 | S&F of 8 to 10 mm thick density regular edged eco friendly light weight calcium silicate smooth texture false ceiling tiles size 600 x 600 mm even back surface aluminium foil, truly moisture resistance 90% including main T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire / 6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm x 25 mm angles complete all as specified and directed by Engr-in-Charge.Note:- Items rate shall be include upto 15.00 meter height of bldgs for scaffolding & all arrangement. |
| 31 | S&F in repair 8 to 10mm thick regular edged eco friendly light weight calcium silicate smooth texture false ceiling tiles size 600x600mm even back surface aluminium foil, truly moisture resistance 90% insert existing frame work without disterbing the other false ceiling and making good existing frame with complete all as specified and directed by Engr-in-Charge.Note:- Items rate shall be include upto 20.00 meter height of bldgs for scaffolding & all arrangement |
| 32 | S&F of 10 to 12mm thick plaster of paris sheets fix in ceiling with and including grid made out of angles and tees of one mm thick G I sheets fixed at not more than 45cm centre to centre in both directions, Grid will be secured by vertical tie of GI sheet angle at not more than 1.2m centre to centre in both directions. The veridical tie of GI sheet angle shall be fixed with M S dash through fasteners of 8 mm dia. The ceiling is to be provided at different profiles like curved, flat, sunk, tapered edge and or raised moulding, the joints shall be filled with plaster of paries, necessary arrangement / cut outs hole for ceiling light as required number etc. complete all as specified and directed by Engr-in-ChargeNote:- (i). The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account.(ii). The quoted unit rate shall be deemed to include the cost of all kinds of profiles and cut outs required for light fixtures, Speakers, Smoke detector, trap doors and AC grill in the ceiling, provision for light fittings, AC grills and diffusers have to be made supported with tees, angles, etc. suitably fixed complete as per direction at no extra cost to the Department. The area of these cutouts which has less than 0.6 Sqm for one unit will not be deducted while measuring the ceiling area. (iii).The contractor must co-ordinate with electrical & AC contractor for working out various levels for the false ceiling & make the marking on the walls / columns before starting the false ceiling work. |
| 33 | All as per item no. 32 but providing, making and fixing Gypsum cornice cove (inside height 150 - 200 mm and border 75 mm) or charcoal moulding strip to hide strip / cove light in ceiling or to act as pelmet for roller blinds on windows or for projector screen, etc. complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for preparing of new POP/ false ceiling surfaces and applying two coats royale luxury emulsion interior paint a luxurious smooth finish white or coloured over a coat of approved primer on walls or ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F of decorative Hollow PVC sheet 10 mm thick (fluted panel) having density not less than 4 Kg/Sqm fixed to wall panelling with self drilling screws including necessary frame of aluminium section 51x35x.55mm and 600 mm c/c 51x32x.55mm grid work and corner mouldings as required as per manufacturing instruction complete all as specified & direced. |
| 36 | S&F of decorative Hollow PVC sheet 10 mm thick fixed to wall and ceiling panelling with self drilling screws including necessary frame of aluminium section 51x35x.55mm and 600 mm c/c 51x32x.55mm grid work and corner mouldings as required as per manufacturing instruction complete all as specfified and directed. |
| 37 | M&L for providing and fixing, decorative WPC sheet (Wood Plastic Composite) 24-26 mm thick having density 600Kg/Cum and fixed to wall & ceiling panelling/ cladding with self drilling screws including necessary frame of aluminium section 51x35x.55mm and 600 mm c/c 51x32x.55mm grid work and corner mouldings as required as per manufacturing instruction including dismantling of existing one etc. complete all as direced by Engr-in-charge. Note:- Design and pattern shall be as directed by Engr-in-Charge. |
| 38 | S&F in repair PVC sheets, of 2mm thick laminated plain coloured, laid with approved rubber based adhesive in floors complete all as specified and directed. |
| 39 | M&L for 2 mm thick polymer natural/ synthetic anti static flooring fire retardant compression moulding conductive flooring having electrical residence floor surface to earth between 50 kilo Ohms to 2.5 mega Ohms measured with wet electorode between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode in accordance with details contained in STEC pamplet No 7 all as specified and fixed over and including copper strips grid work using 50mm x 0.5mm thick formin 0.9 Sqm grid, joints of copper strips, brazed on the existing surface including cleaning preparation of surface by passing with the suitable adhesive. The copper gird provided with daigobal earthing. The earthing resistance shall not exceed one ohm. The copper strips work shall be fixed to the existing floor at the 0.6m to 0.9 mm all as specified and as per manufacture instruction all as specified and directed including removing existing PVC flooring complete all as specified and directed by Engr-in-Charge. Make:- Natroyal Vinyl Industries Pvt. Ltd, Premier Polyfilm Ltd, Tankaria Industries Pvt Ltd, MS Curative Pvt Ltd, Brighton Enterprises |
| 40 | Dismantling of steel rolling shutter in any position in exc 10 sqm and nexc 30 Sqm including all fittings complete all as secified and as directed. |
| 41 | S&F steel rolling shutter with gear operated type with chain wheel out and hand chain, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank, complete all as specified and directed by Engr-in-Charge |
| 42 | S&F of steel rolling shutters, without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as including all necessary parts etc as indicated, complete: push pull or manual type complete all as specified and directed by Engr-in-Charge |
| 43 | S&F wicket door for rolling shutter including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured), thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position including all necessary pats etc as indicated, complete: gear operated type with bevel gear box and crank complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed/welded to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed |
| 45 | M&L for attending complaints in repair related to black smith work including repair of steel frames of doors and gates, by drilling or welding, resecuring of door or gate (area exc 20 Sqm n exc 30 Sqm each) and make it functional etc complete all as specified and directed by Engineer in Charge. |
| 46 | Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed. |
| 47 | All as per Item No.46 above but area of shutters exc. 10 sqm but n. exc. 20 sqm each, complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 48 | All as per Item No.46 above but area of shutters exc. 10 sqm but n. exc. 20 sqm each, complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender