Tender For Maintenance Work Of Kamarajar Municipal Hr Sec School At Pettai Tirunveli Zone, Tirunelveli City Municipal Corporation In Ward No.18
Tender Value
20.85 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
20850
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Work Of Kamarajar Municipal Hr Sec School At Pettai Tirunveli Zone, Tirunelveli City Municipal Corporation In Ward No.18
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete Earthwork Excavation |
| 2 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incident,al charges such as water providing etc., complete as per standard specification |
| 3 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 4 | For Raft / Footing |
| 5 | For plane surfaces such as slab,beam, etc. |
| 6 | For RCC colum ns, sunshades, top and bottom slab of RCC boxing, etc. |
| 7 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 8 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 9 | Brick work in CM 1:5 (one cement & five sand) using ll class ground moulded bricks of size 9\\"X4 3/8\\"X 2 3/4\\" including finishing, curing, etc., complete complvinq with standard soecification.- |
| 10 | Supplying and filling in foundation and basement with Good earth in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.- Basement filling |
| 11 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard speciflcations (S.1.306) |
| 12 | Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Painting Old wood work with One coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 14 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 15 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 16 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 17 | Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary |
| 18 | Supplying and fixing of following pipes and specials |
| 19 | 25mm PVC Pipe |
| 20 | 25mm PVC Union |
| 21 | 25mm PVC FTA |
| 22 | 25mm PVC MTA |
| 23 | 25mm PVC Elbow |
| 24 | 25mm PVC Bend |
| 25 | 25mm PVC Coupler |
| 26 | 25mm PVC Tee |
| 27 | 25mm PVC Shoe |
| 28 | 25mm Tank Fitting |
| 29 | 25mm Ball Valve |
| 30 | 25mm 3way Ball Valve |
| 31 | 20mm PVC Pipe |
| 32 | 20mm PVC Coupling |
| 33 | 20mm PVC Tee |
| 34 | 20mm PVC Ellbow |
| 35 | 20mm PVC Bend |
| 36 | 20mm PVC End |
| 37 | 20mm Ball Valve Bronze |
| 38 | 20mm Tank Fitting |
| 39 | 20mm x 20mm Threaded Elbow |
| 40 | 20mm x 100mm GI Pipe Nipple |
| 41 | 15mm GI Elbow |
| 42 | 15mm GI Hex Nipple |
| 43 | 15mm x 300mm Pipe Nipple |
| 44 | 15mm x 600mm Connection Hose |
| 45 | 15mm x 100mm GI Pipe Nipple |
| 46 | 32mm PVC Pipe |
| 47 | 32mm PVC Coupling |
| 48 | 32mm PVC Elbow |
| 49 | 32mm PVC Bend |
| 50 | 32mm GI Union |
| 51 | PVC Adhesive (Solution) |
| 52 | Shellac |
| 53 | Thread Ball |
| 54 | Wooden Plug, Clamp and Screws |
| 55 | 110mm PVC Pipe |
| 56 | 110mm PVC TEE |
| 57 | 110mm PVC bend |
| 58 | 110mm PVC Elbow |
| 59 | 110mm PVC Shoe |
| 60 | Labour (Plumber: 1-Skilled, 1-Semi Skilled) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender