Tender For Reconditioning And Reinstallation Of Raw Water Vertical Turbine Motor With Pumpset And Starter At Voc Park Pumping Station In Erode City Municipal Corporation
Tender Value
35.60 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
18 days left
EMD
35600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconditioning And Reinstallation Of Raw Water Vertical Turbine Motor With Pumpset And Starter At Voc Park Pumping Station In Erode City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Removal of existing water Lubricated / oil lubricated Vertical Turbine pump, motor with all electrical connections by using special, tools and plants including removal of column pipes, center shaft, outer covering of shaft (oil tube), bowl assembly, bronze bearing SS coupling, impeller etc., using pulley block and specials etc., complete as directed by departmental officers for attending repairs. |
| 2 | Repairing and Servicing of existing Vertical turbine pumpset with following details. supply and delivery of bronze/SS bowl bushes: 2 Nos, discharge case bronze bearingbush1 No, bronze Bell mouth Neck ring:2 Nos, line shaft retainer bearing bushSS:4 Nos, gun metal impeller locking ring :2 Nos, all gasket with O ring etc., :5 Nos, column Spider bearings with :4 Nos,Bronze sleeve for rotating type bushetc.,Labour charges for lathe work of SS shaft rusted portion :4 Nos of machinery and threadingcleaning etc.,Labour charges for lathe work of column pipe:5 Nos of machinery and threading cleaning with stud to zero point of exisiting shaft complete. 32mm MS Bolt and Nuts with45kgs,plate washers suitable for column pipe complete etc., Servicing and overhauling and assembling of the existing Pump bowl assembly spares, shaft, retainer bearing, impeller bushes, and base plate etc., complete by using special tools and plants with all accessories require and as directed by departmental officers. Labour charges for servicing of non reversible clutch/ratchet assembly including supply of required spares like rotating elements complete etc. Painting work for all the column pipes including cleaning of rusted portion along with surface machine tools with manpower complete etc., Conveyance charges from site to workshop and workshop to site including loading and unloading etc., complete as directed by the departmental offices... |
| 3 | Fabrication and alteration work for existing MS baseplate with new foundation work bolt in base slab including using of Gas cutting and welding works in alignment of pump discharge case mounting base etc., complete and also including Labour charges for breaking the holes of Existing RCC roof slab providing of 350 mm dia holes for suction column pipe with heavy duty breaking machine including using of manpower support etcm complete as directed by the departmental officers. |
| 4 | Repairing ,servicing and re-winding of 75 HP vertical turbine Jothi make SPDP VHS Motor including labour charges for cleaning of motor inside core slotted and materialscharges like veedol varnish ,buckaroo glassed insulation materials, with ovan heating motor body moisture cleaning necessary cables connection etc., complete as directed by the departmental officers. |
| 5 | Supply and delivery of Bearings for top side Tapper roller bearing and bottom side ball bearings with lubrication materilas complete etc.,as directed by the departmental officers. |
| 6 | Assembling charges for 75 HP VT motor including copper terminal lead arrangements in box/plate cable termination work including extension copper flat complete etc., |
| 7 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 8 | Erection of water Lubricated / oil lubricated vertical turbine pump with motor at site of work including preparation of suitable foundation and bed, fabrication of packer plates from raw materials , cutting required shims , assembling and joining of all required loose components such as bowl assembly, impellor shaft, line shaft, column pipes , headsoft, discharge head, bearings, drive unit, delivery side pipes , suitable tappers required valves and specials, pressure gauges and flow meters , adjustment of pump shaft and leveling and alignment checkup greasing of relevant components, grouting of foundation bolts and sole plate with non shrink grout materials of conbextra GP-2 cement erection, connecting the relevant electrical cables with motor properly etc. complete and testing the out put and efficiency, site performance test for noise and vibration and trial run for minimum 10 days and commissioning satisfactorily for the various HP of the vertical turbine pumpsets as given below per IE rules as directed by the departmental officers |
| 9 | Supply and delivery of LT cable for 3 ½ Core X 150 sq.mm Al. Armoured U.G.Cable (FINOLEX /KEI /POLYCAB Make) 440 volts as per IS Standard specifications complete etc., as directed by departmental officers |
| 10 | Laying charges for the 3 ½ Core X 150 sq.mm cable etc., complete as directed by the departmental officers. |
| 11 | Jointing materials for 3 ½ Core X 150 sq.mm cable joint Like SEIMENS type gland Aluminium Lugs with labour charges for cable crimping work including crimping paste, along with gable crimping tools etc., complete as directed by the departmental officers. |
| 12 | Supply and delivery of LT cable for 3 ½ Core X 120 sq.mm Al. Armoured U.G.Cable (FINOLEX /KEI /POLYCAB Make) 440 volts as per IS Standard specifications complete etc., etc., complete complying with standard specification |
| 13 | Laying charges for the 3 ½ Core X 120 sq.mm cable etc., complete as directed by the departmental officers |
| 14 | Jointing materials for 3 ½ Core X 120 sq.mm cable joint Like SEIMENS type gland Aluminium Lugs with labour charges for cable crimping work including crimping paste, along with gable crimping tools complete etc., as directed by the departmental officers officers |
| 15 | Supply and delivery and fixing of local push button ON/OFF type controlling of Motor Unit –I and II including internal Wiring etc., complete as directed by the departmental officers |
| 16 | Supply and delivery of LT cable for 6 Core X 2.5 sq.mm Copper armoured U.G.Cable (FINOLEX /KEI /POLYCAB Make) 440 volts as per IS Standard specifications etc., complete as directed by the departmental officers officers |
| 17 | Laying charges for the 6 Core X 2.5 sq.mm cable etc., complete as directed by the departmental officers officers |
| 18 | Jointing materials for 6 Core X 2.5 sq.mm cable Like SEIMENS type gland copper Lugs with labour charges for cable crimping work including crimping paste etc.,complete as directed by the departmental officers officers |
| 19 | Repairing and Servicing of existing 75HP ATS oil cooled starter with all electrical connections by using special, tools and plants including removal of Existing cable termination complete with replacement of connected required electrical spares LED type indication lamp,internal wiring, single phase digital type monitor, over load protection control relay setting arrangements, etc., complete including starting and running contactors, complete servicing male and female contactor copper tips. After servicing the 75HP ATS oil cooled starter with all electrical connections should erect at VOC pumphouse as directed by departmental officers |
| 20 | Supply and delivery of electoral super grade transformer oil As required qty of filling of existing starter transformer compartment Level etc., complete as directed by the departmental officers. |
| 21 | Supply and delivery of 300 dia DI D/F NRV PN 1.6 as per IS standard specifications etc.,complete as directed by the departmental officers. |
| 22 | Supply and delivery of 300 dia DI D/F SV PN 1.6 as per IS standard specifications etc.,complete as directed by the departmental officers. |
| 23 | Supply and delivery of 350 mm dia jointing materilas 6 mm White Rubber insertion sheet jointing of flange to Flange unsurfaced face including MS bolt and nuts with plate washer etc., complete as directed by the departmental officers. |
| 24 | Supply and delivery of MS fabricated flanged distance Piece for VT pump delivery line arrangements complete etc., complete etc., etc., complete complying with standard specification Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender