Tender For Annual Maintenance Of Bore Hand Pumps, Borewell Pumpsets And Air Compressors At Ward No:1,2,3,4,6,7,13,14,15, 16, 17, 23,24,25,And 26 In Zone 1 Area.
Tender Value
13.25 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
10 days left
EMD
13250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Of Bore Hand Pumps, Borewell Pumpsets And Air Compressors At Ward No:1,2,3,4,6,7,13,14,15, 16, 17, 23,24,25,And 26 In Zone 1 Area.
BOQ
| Sl. No. | Item Description |
| 1 | Servicing, removing, dismantling, assembling, re-erection, pipe, specials of following items of work as follows (the cost of the existing damaged coil other than burned coil should be deducted) |
| 2 | 2 HP Submersible Motor : |
| 3 | Motor Rewinding Charge |
| 4 | Replacement of cover sleeve on two nos |
| 5 | Shaft welding on two sides |
| 6 | Replacement of Thrust Bearing\\"s- 2 mos |
| 7 | Lath Work and fixing charge |
| 8 | Replacement of brass bush & clutch pad – 1Set |
| 9 | Replacement of “O” ring & oil seal -1No |
| 10 | Replacement of circlip lock -1No |
| 11 | 2 HP Submersible Pump Over Handling : |
| 12 | Replacement of PVC impellor - 1 no |
| 13 | Replacement of brass bushes 1 Set |
| 14 | Replacement of S.S. bushes 1 Set |
| 15 | Lathe works & fixing charge |
| 16 | Replacement of rubber bush -1No |
| 17 | 5 HP submersible Motor : |
| 18 | Motor Rewinding charge |
| 19 | Replacement of cover sleeve, - 2Nos. |
| 20 | Shaft welding on two sides |
| 21 | Replacement of Thrust Bearing’s – 2 Nos. |
| 22 | Lathe work and fixing charge |
| 23 | Replacement of brass bush & clutch pad – 1Set |
| 24 | Replacement of “O” ring & oil seal -1No |
| 25 | Replacement of circlip lock -1No |
| 26 | 5 HP Submersible Pump Over Hauling : |
| 27 | Replacement of brass impellor -1No |
| 28 | Replacement of brass bushes 1 Set |
| 29 | Replacement of S.S. bushes 1 Set |
| 30 | Lathe works & fixing charge |
| 31 | Replacement of rubber bush -1No |
| 32 | 7.5 HP Submersible Motor : |
| 33 | Motor Rewinding charge |
| 34 | Replacement of cover sleeve 2Nos. |
| 35 | Shaft welding on 2 sides |
| 36 | Replacement of thrust bearings - 2Nos. |
| 37 | Lathe work and fixing charge |
| 38 | Replacement of brass bush & clutch pad -1Set |
| 39 | Replacement of “O” ring & oil seal -1No |
| 40 | Replacement of cir clip lock -1No |
| 41 | 7.5 HP Submersible Pump Side : |
| 42 | Replacement of brass impellor -1No |
| 43 | Replacement of brass bushes – 1Set |
| 44 | Replacement of S.S. bushes – 1Set |
| 45 | Lathe works & fixing charge |
| 46 | Replacement of rubber bush -1No |
| 47 | 5 HP Mono block motor : |
| 48 | Motor Welding charge |
| 49 | Shaft Welding on 2 side and lathe work |
| 50 | Replacement of Drive END and Non Drive END sleeves |
| 51 | Replacement of bearings - 2Nos. |
| 52 | Mechanical & Lathe works etc. |
| 53 | Removing of Motor, re fixing & transport charges |
| 54 | 5 HP Air Compressor Over Hauling : |
| 55 | Replacement of piston - 2Nos. |
| 56 | Replacement of Rings -2 Sets |
| 57 | Replacement of connecting rod – 1 Set |
| 58 | Replacement of bearing - 2Nos. |
| 59 | Head Cylinder, head spacing charge (over size bork) |
| 60 | Replacement washer gasket including packing paste & charge |
| 61 | Service & fitting charges |
| 62 | Center Cooler -1No |
| 63 | Head New Piece -1No |
| 64 | Air filter -1No |
| 65 | Bolt and Nut -1No |
| 66 | Removing of Compression, Re fixing & transport charge |
| 67 | (iii) 5 HP / 7.5 HP Control Panel Starters : |
| 68 | Replacement of No volt coil – 1No |
| 69 | Replacement of Over load replay – 1No |
| 70 | Replacement of contractor – 1 Set |
| 71 | Timer |
| 72 | Volt meter |
| 73 | Ammeter |
| 74 | Single phasing preventers |
| 75 | Replacement of starter contacts per - 1Set |
| 76 | Service & fitting charges |
| 77 | Labour Charges for HDPE Houses :- |
| 78 | Labour Charges for Removed of HDPE Hoses from the Existing Borewell per each Borewell. |
| 79 | Labour Charges for Re erection of HDPE Hoses in the Exsiting Borewell per each Borewell. |
| 80 | Filling of 20 / 40 Oil : |
| 81 | Filling 20 / 40 oil to in the compressor per liter |
| 82 | Removal and rerection of submersible pump set in the existing borewell. |
| 83 | Up to 5 hp submersible pumpset ( WD - W0871 - 2025-26 ) |
| 84 | 5 to 10 hp submersible pumpset ( WD - W0872 - 2025-26 ) |
| 85 | Conveyance of power pump set and its accessories from the site uto 10km (WD-W0886 - 2025-26) |
| 86 | Re-erect. of submersible pumpsets and its accessories from borewell for attending repairs. (above 5 HP) |
| 87 | submersible cables and service cable. |
| 88 | Replacement of 2.5 sq.mm 3core flat cu.cable - 1RM (WD - W1974 2025-26 ) |
| 89 | Replacement of 4.0 sq.mm 3core flat cu.cable - 1RM ( WD - W175 2025-26 ) |
| 90 | Main switch and fuse units. |
| 91 | 16Amps fuse unit -1No |
| 92 | 32Amps fuse unit -1No |
| 93 | (v) UPVC pipe. |
| 94 | Replacement of 32mm UPVC pipe ( M - 1086 2025-26 ) |
| 95 | Replacement of 40mm UPVC pipe ( M - 1087 2025-26 ) |
| 96 | Labour charges for removing HDPE hose submersible motor “ From the damaged borwell : |
| 97 | Labour charges for removing HDPE hoses from the damaged. Stuck borewell |
| 98 | Labour charges for removing submersible motor from the damaged stuck borewell |
| 99 | Supply and fixing of 3phase wall mounting starter panel board. |
| 100 | 2HP 3 phase panel board -1No ( WD - M 1909 2025-26 ) |
| 101 | 5HP control panel board - 1no ( WD - M 1912 2025-26 ) |
| 102 | 7.5HP- 3 phase control panel board-star delta with two level guard and auto start -1No ( WD - M 1915 2025-26 ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender