Tender For Constructing Primary School Building @ Junoni Tal - Sangola ( Const.Zp School- T.S. 277/2025-26)
Tender Value
19 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructing Primary School Building @ Junoni Tal - Sangola ( Const.Zp School- T.S. 277/2025-26)
BOQ
| Sl. No. | Item Description |
| 1 | Item 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR P/INO. 153/21.02 BDA 1 |
| 2 | Item 2 Item 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) SSR P/INO. 153/21.06 BDA 2 |
| 3 | Item 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand SSRP/INO.180/21.01/Bd.E.1 Page No.287 BDA 12 |
| 4 | Item 4 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand SSRP/INO.185/25.11 BDF 3 |
| 5 | Item 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand SSRP/INO.185/25.31 BDF 5 |
| 6 | Item 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand SSRP/INO.191/25.50 BDF 6 |
| 7 | Item 7 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand SSRP/INO.191/25.50 BDF 6 |
| 8 | Item 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand /V.S.I. quality Artificial Sand SSR 2017-18 PNO/INO.202/26.33 BDF 17 |
| 9 | Item 9 Providing and fixing in position TMT FE500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR |
| 10 | Item 10 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete SSR 215/27.01 BDG 1 |
| 11 | Item 11 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc Complete SSRPN/INO157/21.36 BDA 10 A) Excavated material |
| 12 | Item 12 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc Complete SSRPN/INO157/21.37 BDA 10 B) With contractors soil |
| 13 | Item 13 Providing second class Burnt Brick masonry with conventional/ IS. type bricks in cement mortar 1:6 in Super Structure, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 DSR PNO. 77.1/6 BDG 1 |
| 14 | Item 14 roviding internal cement plaster 6 mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete Spec. No: Bd.L.4 Page No. 368 DSR PNO. 90, 3a/11 BDL 4 |
| 15 | Item 15 roviding internal cement plaster 12 mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete Spec. No: Bd.L.4 Page No. 368 DSR PNO. 90, 3a/11 BDL 4 |
| 16 | Item 16 Providing cement plaster 20mm thick in single coatin c. m. 1:5 without neeru Finish to concrete or brick surfaces, in all positions including scaffolding and curing complete.SSR PNO/I NO. 226/32.03 BDL 2 |
| 17 | Item 17 Providing and fixing double leaf steel door without ventilator including shutter of MS frame of angle 50x50x6 mm and shutter frame of MS angle of 30x30x6 min and shutter sheet of 10 guage of approved quality with hold fast neceaasry fixing and fastening and Fixtures,necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete. |
| 18 | Item 18 Providing and fixing steel windows of verious as per detailed drawings without ventilator and steel frame of angle 40x40x5 mm and shutter frame of 25x25x5 mm and shutter with MS sheet of 18 guage of approved quality with hold fast neceaasry fixing and fixing and fastening and fixtures, necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete. (Including MS guard bars of 12 mm at 10 cm c/c and MS flat of 40x6 mm) |
| 19 | Item 19 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary SSR 217/35.26 |
| 20 | Item 19 Providing and applying plastic emulsion paint of approved quality. colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc.complete.218/36.12 |
| 21 | Item 21 Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.218/36.03 |
| 22 | Item 22 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring |
| 23 | Item 23 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. b) Skirting |
| 24 | Item 24 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 25 | Item 25 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete |
| 26 | Item 26 -Royalty Charges Sand |
| 27 | Item 27 -Royalty Charges Other Material |
| 28 | Item 28 Fine AggregateSand)-Fineness Modulus (Sieve Analysis), Silt & Clay Content |
| 29 | Item 29 Course aggregate--Sieve analysis |
| 30 | Item 30 Bricks--Water Absorption |
| 31 | Item 31 Concrete M20--Compressive strength of C.C. cube |
| 32 | Item 32 -Add GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender