Tender For Fencing And Beautification Of Ziyarat Sharief Hazrat Nezam-Ud-Din (Ra) Ladu. Ladoora.
Tender Value
29.41 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
58820
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fencing And Beautification Of Ziyarat Sharief Hazrat Nezam-Ud-Din (Ra) Ladu. Ladoora.
BOQ
| Sl. No. | Item Description |
| 1 | A) FencingEarth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | Providing and laying of stone soling 75 mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including carriages complete job. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc and removal of formwork for:Foundations, Footings, Bases of Columns etc for mass concrete |
| 6 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm including redoxide and synthetic enamel paint in two or more coats etc complete job. |
| 8 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 9 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 10 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 11 | B) CC DrainDemolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 12 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres |
| 13 | Providing and laying of stone soling (hand packed) in foundation trenches and ramming, including all leads, lifts carriage complete. |
| 14 | Providing & laying in position cement conc. of 1:4:8 (1 cement : 4 coarse sand: 8 graded agg. 20mm nominal size) excluding the cost of centring & shuttring all work upto plinth level incl. all carriages. |
| 15 | Providing & laying cement conc. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) including attached pilasters columns, piers, abutments, pillars, coping, bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excl: the cost of centring shuttring & finishing incl. all carriages. |
| 16 | Centering and shuttering including strutting, propping etc and removal of formwork for:Foundations, Footings, Bases of Columns etc for mass concrete |
| 17 | 12mm thick cement plaster in 1:4 fine sand mix on walls incl all carriage and cost of material complete |
| 18 | 50mm thick cement conc. flooring using 1:2:4 mix & finished with finishing coat of neat cement. |
| 19 | Providing & laying in position reinforced cement conc. of 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded agg. 20mm nominal size) excluding the cost of centring & shuttring all work upto plinth level incl. all carriages. |
| 20 | Centering and shuttering including strutting, propping etc and removal of formwork for:slab (Non retreivable) |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Hot rolled deformed bars |
| 22 | Providing & laying of 300mm dia RCC spun pipes NP3 in position including earth work cutting, laying of pipes in position & re-filling by excavated materials, providing sufficient cushions over pipes including loading, unloading, & including all carriages |
| 23 | C)Tile PathEarth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 24 | Providing and laying of stone soling (hand packed) in foundation trenches and ramming, including all leads, lifts carriage complete. |
| 25 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 26 | Centering and shuttering including strutting, propping etc and removal of formwork for:Foundations, Footings, Bases of Columns etc for mass concrete |
| 27 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge.required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 28 | D)PanellingDismantiling Wooden /Ply boardings in lining of ceiling ,walls and Partitions including supporting members but incld stacking within 50 meters lead thickness above 10 mm upto 25 mm (Finished work to be measured) |
| 29 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Kiln seasoned wood incld carriage |
| 30 | Providing and fixing of Plywood Boards of Approved quality including nails and carriage complete.10 mm thick |
| 31 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Paanch Murabah |
| 32 | Providing and fixing of Imported Wood Panelling including two or more coats of glue sizing with Copal varnish over and under coat of flatting varnish of Approved Brand and manufacture complete Job. |
| 33 | Providing and fixing of cornice of KD wood 50mm x 50 mm incld. Priming coat all complete |
| 34 | Providing and fixing of Ornamental Second class Kashmiri local Deodar wooded eaves boarding 300x30 mm (nominal size) as per the approved/available pattern and design incl cost of nails Complete job, cost of Touch wood with sealer over prepared base / Finishing to be approved by Engineer-in-charge. Finishing to be approved by Engineer-in-charge. |
| 35 | Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 meters lead |
| 36 | roviding and fixing of Pinjra Kari Heritage type work as per approved pattern / design of 1st class Kashmiri local budloo wood complete job including Beading & necessary nails. (including cost of all material, leads, lifts and carriages etc upto site of work complete) |
| 37 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 38 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 39 | Providing and laying vitrified floor tiles in 600 mm x 600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 40 | Providing and fixing of ornamental brass aldrop of approved brand 10\\" |
| 41 | Providing and fixing of tower bolt 6\\" of approved brand |
| 42 | Providing and fixing of ornamental brass door handle 6\\" of approved brand |
| 43 | Providing and fixing of lighting point incld. Wire and 15 Watt round LED downlighter 140 mm wide warm white |
| 44 | Providing and fixing of decorative LED strip of standard quality as directed by site engineer. |
| 45 | Providing and fixing of 5.0 mm thick clear float glass panes including Beading & necessary nails complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender